References
- Archilla, A.R. and Madanat, S., 2000. Development of a pavement rutting model from experimental data. Journal of Transportation Engineering, 126 (4), 291–299.10.1061/(ASCE)0733-947X(2000)126:4(291)
- Bari, J. and Witczak, M.W., 2006. Development of a new revised version of the Witczak E* predictive model for hot mix asphalt mixtures. Journal of the Association of Asphalt Paving Technologists, 75, 381–417.
- Bekheet, W., 2003. Investigation of in-situ shear properties of asphalt concrete. Thesis (PhD). Carleton University.
- Bi, Y. and Sun, L., 2005. Research on test method of asphalt mixture’s shearing properties. Journal of Tongji University, 33 (8), 1036–1040.
- Cominsky, R.J., et al., 1994. The superpave mix design manual for new construction and overlays. Washington, DC: Strategic Highway Research Program.
- Drakos, C., Roque, R., and Birgisson, B., 2001. Effects of measured tire contact stresses on near-surface rutting. Transportation Research Record: Journal of the Transportation Research Board, 1764, 59–69.10.3141/1764-07
- El-Basyouny, M. and Jeong, M., 2009. Effective temperature for analysis of permanent deformation and fatigue distress on asphalt mixtures. Transportation Research Record: Journal of the Transportation Research Board, 2127, 155–163.10.3141/2127-18
- Hua, J., 2000. Finite element modeling and analysis of accelerated pavement testing devices and rutting phenomenon. Thesis (PhD). Purdue University.
- Ji, X., et al., 2013. Application of asphalt mixture shear strength to evaluate pavement rutting with accelerated loading facility (ALF). Construction and Building Materials, 41, 1–8.10.1016/j.conbuildmat.2012.11.111
- Kaloush, K.E. and Witczak, M.W., 2002. Tertiary flow characteristics of asphalt mixtures. Journal of the Association of Asphalt Paving Technologists, 71, 284–320.
- Kennedy, T.W., et al., 1994. Superior performing asphalt pavements (superpave): the product of the SHRP asphalt research program. Washington, DC: Strategic Highway Research Program.
- Li, H., Huang, X., and Zhang, J., 2007. Simulation analysis on rutting of asphalt pavements considering consecutive temperature variation. Journal of Southeast University (Natural Science Edition), 5, 915–920.
- Sun, L., et al., 2010. Development of shear-based rutting prediction model for asphalt pavements. The 11th International society for asphalt pavements. Nagoya.
- McLeod, N.W., 1950. A rational approach to the design of bituminous paving mixtures. Journal of Association of Asphalt Paving Technologists, 19, 82–87.
- Monismith, C.L., Deacon, J.A., and Harvey, J.T., 2000. Westrack: performance models for permanent deformation and fatigue. Berkeley, CA: University of California.
- Monismith, C.L., et al., 1994. Permanent deformation response of asphalt aggregate mixes. Washington, DC: Strategic Highway Research Program.
- Monismith, C.L., Popescu, L., and Harvey, J.T., 2006. Use of shear test data for mix design, performance analysis and rut depth prediction. The 10th International Conference on Asphalt Pavements. Quebec.
- Said, S.F., et al., 2011. Prediction of flow rutting in asphalt concrete layers. International Journal of Pavement Engineering, 12 (6), 519–532.10.1080/10298436.2011.559549
- Sousa, J.B., Craus, J., and Monismith, C.L., 1991. Summary report on permanent deformation in asphalt concrete. Washington, DC: Strategic Highway Research Program.
- Sun, L., 2005. Structural behavior study for asphalt pavements. Beijing: China Communications Press.
- Su, K., 2007. Mechanism and prediction model of rutting in asphalt pavements. Dissertation (PhD). Tongji University.
- Tang, W., 2009. Research on deformation evaluation model of rutting in asphalt pavement. Dissertation (PhD). Tongji University.
- Wang, Y., Zhu, J., and Sun, L., 2013. Prediction model of shear deformation of asphalt mixture pavement. Journal of Tongji University, 41 (11), 1688–1696.
- Xu, Y., Sun, L., and Liu, L., 2013. Research on asphalt mixture permanent deformation by single penetration repeated shear test. Journal of Tongji University, 41 (11), 1688–1696. 41 (8): 1203–1207.