Bonded concrete overlay of asphalt mechanical-empirical design procedure

References

• ABAQUS, 2004. ABAQUS software version 6.5: analysis user’s manual. Providence, RI: Hibbitt, Karlson and Sorensen, Inc.
   Google Scholar
• ACPA, 2013. Concrete overlay on asphalt (BCOA) thickness designer [online]. Rosemont, IL, American Concrete Pavements Association. Available from: http://apps.acpa.org/apps/bcoa.aspx [Accessed 1 Aug, 2013].
   Google Scholar
• Andrei, D., Witczak, M.W., and Mirza, M.W. 1999. Development of a revised predictive model for the dynamic (complex) modulus of asphalt mixtures. College Park, MD: Department of Civil Engineering, University of Maryland, Inter Team Technical Report prepared for the NCHRP 1-37A Project.
   Google Scholar
• ARA, Inc., 2004. Guide for mechanistic-empirical design of new and rehabilitated pavement structures. Washington, DC: National Academy of Science, NCHRP 1-37A Report.
   Google Scholar
• Barman, M., et al., 2011. Development of a rational mechanistic-empirical based design guide for thin and ultra-thin whitetopping. task 1 report. Minneapolis, MN: University of Pittsburgh, Federal Highway Administration (FHWA) Pooled Fund study, TPF 5–165.
   Google Scholar
• Gucunski, N., 1998. Development of a design guide for ultra-thin whitetopping (UTW). Providence, RI: New Jersey Department of Transportation. Research report.
   Google Scholar
• Janssen, D.J. and Snyder, M.B., 2000. Temperature-moment concept for evaluating pavement temperature data. Journal of Infrastructure Systems, 6, 81–83.10.1061/(ASCE)1076-0342(2000)6:2(81)
   Google Scholar
• Larson, G. and Dempsey, B., 2003. Enhanced integrated climatic model version 3.0 (EICM). Urbana, IL: University of Illinois.
   Google Scholar
• Li, Z. and Vandenbossche, J.M., 2013. Redefining the failure mode for thin and ultra-thin whitetopping with 1.8-m by 1.8-m (6- x 6-ft) joint spacing. Transportation Research Record: Journal of Transportation Research Board, 3, 133–144.
   Web of Science ®Google Scholar
• Li, Z., et al., 2013. Bonded concrete overlay of asphalt pavements mechanistic-empirical design guide (BCOA-ME) – theory manual. Minneapolis, MN: University of Pittsburgh, Federal Highway Administration (FHWA) Pooled Fund study, TPF 5–165.
   Google Scholar
• Mu, F., Vandenbossche, J.M., and Barman, M., 2011. Development of a rational mechanistic-empirical based design guide for thin and ultrathin whitetopping, task 4: climatic considerations. Federal Highway Administration (FHWA) Pooled Fund study, TPF 5-165, 1–71.
   Google Scholar
• Mu, F. and Vandenbossche, J.M., 2012. Establishing effective linear temperature gradients for bonded concrete overlays on asphalt pavements. Transportation Research Record: Journal of the Transportation Research Board. 2305, 24–31.
   Web of Science ®Google Scholar
• Mu, F. and Vandenbossche, J.M., 2013. Development of design of design guide for thin and ultra-thin concrete overlays of existing asphalt pavements, task 2 report: review and selection of structural response models. Minneapolis, MN: University of Pittsburgh, Federal Highway Administration (FHWA) Pooled Fund study, TPF 5-165.
   Google Scholar
• Roesler, J., et al., 2008. Design and concrete material requirements for ultra-thin whitetopping. Champaign IL: Illinois Center for Transportation, FHWA-ICT-08-016.
   Google Scholar
• Sheehan, M.J., Tarr, S.M., and Tayabji, S., 2004. Instrumentation and field testing of thin whitetopping pavement in Colorado and revision of the existing Colorado thin whitetopping procedure. Denver, CO: Colorado Department of Transportation, Report No. CDOT DTD-R-2004-12
   Google Scholar
• Tarr, S.M., Sheehan, M.J., and Okamoto, P.A., 1998. Guidelines for the thickness design of bonded whitetopping pavement in the state of Colorado. Denver, CO: Colorado Department of Transportation, Report No. CDOTDTD- R-98-10.
   Google Scholar
• Titus-Glover, L., et al., 2005. Enhanced Portland cement concrete fatigue model for streetpave. Transportation Research Record: Journal of the Transportation Research Board, 1919, 29–37.
   Google Scholar
• Vandenbossche, J.M., 2003. Performance analysis of ultra-thin whitetopping intersections on US-169, Elk river, Minnesota. Transportation Research Record: Journal of the Transportation Research Board, 1853, 18–27.
   Google Scholar
• Wu, C.L., et al., 1998. Development of ultra-thin whitetopping design procedure. Skokie, IL: Portland Cement Association, Report RD 2124.
   Google Scholar