348
Views
8
CrossRef citations to date
0
Altmetric
Articles

Limitations and potential improvement of the aircraft pavement strength rating system to protect airport asphalt surfaces

Pages 1111-1121 | Received 16 Apr 2015, Accepted 03 Feb 2016, Published online: 04 Mar 2016

References

  • Airbus, 2014. Toulouse, France. Available from: <http://www.airbus.com/support/maintenance-engineering/technical-data/aircraft-characteristics/> [Accessed 27 Jan 2014].
  • Airbus, 2016. Toulouse, France. Available from: <http://www.airbus.com/aircraftfamilies/passengeraircraft/a350xwbfamily/technology-and-innovation/> [Accessed 1 Feb 2016].
  • Al-Qadi, I.L. and Wang, H., 2011. Prediction of tire pavement contact stress and analysis of asphalt pavement response: a decoupled approach. Proceedings asphalt pavement technology, 27–30 March. Tampa, FL, USA: Association of Asphalt Paving Technologists, 289–315.
  • Al-Qadi, I.L., Wang, H., and Tutumluer, E., 2010. Dynamic analysis of thin asphalt pavements by using cross-anisotropic stress-dependent properties for granular layers. Journal of the Transportation Research Board, 2154, 153–163.
  • Ameri-Gaznon, M. and Little, D.N., 1990. Octahedral shear stress analysis of an ACP overlay on a rigid base. Journal of Association of Asphalt Paving Technologists, 59, 443–479.
  • Boeing, 2013. Seattle, WA, USA. Available from: <http://www.boeing.com/boeing/commercial/airports/plan_manuals.page> [Accessed 27 Jan 2014].
  • Bognacki, C.J., Frisvold, A., and Bennert, T., 2007. Investigation into asphalt pavement slippage failures on Runway 04R-22L Newark International Airport. Proceedings 2007 FAA worldwide airport technology transfer conference, 16–18 April. Atlantic City, USA: Federal Aviation Administration.
  • Button, F.W. and Epps, J.A., 1985. Identifying tender asphalt mixtures in the laboratory. Transport Research Record: Journal of the Transportation Research Board, 1034, 20–26.
  • CROW, 2003. The PCN runway strength rating and load control system. CROW report 04-09, CROW.
  • De Beer, M., Fisher, C., and Jooste, F.J., 2002. Evaluation of non-uniform tyre contact stresses on thin asphalt pavements. 9th international conference on asphalt pavements, 17–22 August. Copenhagen, Denmark.
  • De Beer, M., Maina, J.W., van Rensburg, Y., and Greben, J.M., 2011. Towards using tire-road contact in pavement design and analysis. September 2011 meeting of the tire society. South Africa: Pretoria.
  • Dickinson, E.J., 1981. Pavement temperature regimes in Australia: their effect on the performance of bituminous constructions and their relationship with average climate indicators. Special Report 23. Australian Road Research Board, August.
  • Emery, S., 2005. Bituminous surfacings for pavement on Australian airports. Proceedings Australian airports association convention, 14–17 November. Hobart, Tasmania, Australia: Australian Airports Association.
  • EU, 2000. AMADEUS: advanced models for analytical design of european pavement structure. Report RO-97-SC.2137, 29 March. European Commission.
  • Fabre, C., 2011. The Airbus high tyre pressure test. Flight airworthiness support technology, No. 48, 2–9. Airbus Industries.
  • Fabre, C., Balay, J., Lerat, P., and Mazars, A., 2009. Full-scale aircraft tire pressure test. Proceedings eight international conference on the bearing capacity of roads, railways and airfields, 29 June–2 July, 1405–1413. Urbana-Champaign, IL, USA.
  • Garg, N., 2014. FAA’s airport pavement test vehicle – need capability and future research. Presented to 2014 FAA worldwide airport technology transfer conference, 5–7 August. Galloway, NJ, USA: Federal Aviation Administration.
  • Hayhoe, G, 2012. Full-scale testing on asphalt of heavily loaded high inflation pressure aircraft tyres. Presented to summer winter integrated field technologies (SWIFT) 2012, 17–20 September. Banff, Alberta, Canada.
  • Holleran, G. and Holleran, I., 2010. Bitumen chemistry using cheaper sources – an improved method of measurement by TLC-FID and the characterisation of bitumen by rheology and compositional means. Proceedings 24th ARRB conference, 12–15 October. Melbourne, Victoria, Australia: ARRB Transport Research.
  • Horak, E., Emery, S., Maina, J., and Walker, B., 2009a. Mechanistic modelling of potential interlayer slip at base and sub-base level. Proceedings eighth international conference on the bearing capacity of roads, railways and airfields, 29 June–2 July, 543–550. Urbana-Champaign, USA.
  • Horak, E., Maina, J., and Emery, S., 2009b. A case study: quantification and modeling of asphalt overlay delamination on an airport pavement. Proceedings eight international conference on the bearing capacity of roads, railways and airfields, 29 June–2 July, 1475–1483. Urbana-Champaign, USA.
  • Kim, M., Tutumluer, E., and Kwon, J., 2009. Nonlinear pavement foundation modeling for three-dimensional finite-element analysis of flexible pavements. International Journal of Geomechanics, 9 (5), 195–208.10.1061/(ASCE)1532-3641(2009)9:5(195)
  • Loizos, A. and Charonitis, G., 2004. Bearing capacity and structural classification of flexible airport pavements. Journal of Transportation Engineering, 130 (1), 34–42.10.1061/(ASCE)0733-947X(2004)130:1(34)
  • Maina, J.W. and Matsui, K., 2004. Development of software for elastic analysis of pavement structure due to vertical and horizontal surface loadings. Proceedings 83rd meeting of the transport research board, 11–15 January. Washington, DC, USA: Transport Research Board.
  • Maina, J.W., Denneman, E., and De Beer, M., 2008. Introduction of new road pavement response modelling software by means of benchmarking. Proceedings 27th annual south african transportation conference, 7–11 July. Pretoria, South Africa.
  • Maina, J.W., Ozawa, Y., and Matsui, K., 2012. Linear elastic analysis of pavement structure under non-circular loading. Road Materials and Pavement Design, 13 (3), 403–421.10.1080/14680629.2012.705419
  • Perdomo, D, and Button, J.W., 1991. Identifying and correcting rut-susceptible asphalt mixtures. Research Report FHWA/TX-91/1121-2F, February. Federal Highways Administration.
  • Rodway, B., 2009. Asphalt deformation due to high tyre pressure. FAA airport pavement working group annual meeting, 21–23 July. Atlantic City, NJ, USA: Federal Aviation Administration.
  • Roginski, M.J., 2007. Effects of aircraft tire pressures on flexible pavements. Proceedings advanced characterisation of pavement and soil engineering materials, 20–22 June, 1473–1481. Athens, Greece: Taylor and Francis.
  • Roginski, M.J., 2013. ICAO update – status of high tyre pressure revision to Annex 14. Presented to the FAA working group meeting, 15–17 April. Atlantic City, NJ, USA: Federal Aviation Administration.
  • Shell, 2015. The shell bitumen handbook. 6th ed. London: ICE Publishing.
  • Shepson, O., 2009. Boeing and Airbus tire pressure test programs. Presented to ALACPA airport pavement seminar and FAA workshop, 26–30 October. Sao Paulo, Brazil.
  • Uzan, J., 1999. Granular material characterization for mechanistic pavement design. Journal of Transportation Engineering, 125 (2), 108–113.10.1061/(ASCE)0733-947X(1999)125:2(108)
  • White, G.W., 2007. Thickness design of flexible aircraft pavements. Thesis. Faculty of Built Environment and Engineering, Queensland University of Technology, for the Award of Master of Engineering, July.
  • White, G., 2014b. New airport pavement technologies from the USA. Proceedings 2014 Australian airport association national conference, 23–27 November. Gold Coast, Australia: Australian Airports Association.
  • White, G., 2014a. Cyclic shear deformation of asphalt at Melbourne Airport. Proceedings 2014 worldwide airport pavement technology transfer conference, 5–7 August. Galloway, NJ, USA: Federal Aviation Administration.
  • White, G., 2016. Shear stresses in an asphalt surface under various aircraft braking conditions. International Journal of Pavement Research and Technology, 9: 2, article-in-press.
  • White, G. and Rodway, B., 2014. Distress and maintenance of grooved runway surfaces. Proceedings airfield engineering and maintenance summit, 25–28 March. Furama Riverfront, Singapore.
  • Witczak, M.W. and Uzan, J., 1988. The universal airport pavement design system, report I of IV: granular material characterization. College Park, MD: University of Maryland.
  • Yoo, P.J., Al-Qadi, I.L., Elseifi, M.A., and Janajreh, I., 2006. Flexible pavement responses to different loading amplitudes considering layer interface conditions and lateral shear forces. International Journal of Pavement Engineering, 7 (1), 73–86.10.1080/10298430500516074

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.