641
Views
14
CrossRef citations to date
0
Altmetric
Original Articles

Linear and nonlinear viscoelastic and viscoplastic analysis of asphalt binders with warm mix asphalt additives

ORCID Icon, ORCID Icon, , &
Pages 857-864 | Received 09 Jul 2016, Accepted 10 Jul 2016, Published online: 12 Aug 2016

References

  • AASHTO – T 240 , 2009. Effect of heat and air on a moving film of asphalt binder (rolling thin-film oven test) . Washington, DC: American Association of State Highway and Transportation Officials.
  • AASHTO – T 315 , 2009. Determining the rheological properties of asphalt binder using a dynamic shear rheometer (DSR) . Washington, DC: American Association of State Highway and Transportation Officials.
  • AASHTO – TP 70 , 2009. Multiple stress creep recovery (MSCR) test of asphalt binder using a dynamic shear rheometer (DSR) . Washington, DC: American Association of State Highway and Transportation Officials.
  • Adorjányi, K. and Füleki, P. , 2011. Performance evaluation of bitumens at high temperature with multiple stress creep recovery test. Hungarian Journal of Industrial Chemistry Veszprém , 39 (2), 195–199.
  • Airey, G.D. , Rahimzadeh, B. and Collop, A.C. , 2002. Linear viscoelastic limits of bituminous binders (with discussion). Journal of the Association of Asphalt Paving Technologists , 71, 89–115.
  • Anon , 2005. NCAT evaluates warm mix asphalt. National Center for Asphalt Technology, Auburn University , 17 (2), 1–16.
  • Arega, Z. and Bhasin, A. , 2012. Final report: binder rheology and performance in warm mix asphalt . TX: Texas Department of Transportation. Available from: http://trid.trb.org/view.aspx?id=1225677 [ Accessed 7 September 2013].
  • Arega, Z. , et al. , 2011. Influence of warm-mix additives and reduced aging on the rheology of asphalt binders with different natural wax contents. Journal of Materials in Civil Engineering , 23 (10), 1453–1459. Available from: http://ascelibrary.org/doi/pdf/10.1061/(ASCE)MT.1943-5533.0000315 [ Accessed 18 May 2014].10.1061/(ASCE)MT.1943-5533.0000315
  • Cheung, C. and Cebon, D. , 1997. Deformation mechanisms of pure bitumen. Journal of Materials in Civil Engineering , 9 (3), 117–129. Available from: http://ascelibrary.org/doi/abs/10.1061/(ASCE)0899-1561(1997)9:3(117) [ Accessed 18 May 2014].10.1061/(ASCE)0899-1561(1997)9:3(117)
  • Cheung, C. and Cebon, D. , 1997. Thin film deformation behavior of power-law creeping materials. Journal of Engineering Mechanics , 123 (11), 1138–1152. Available from: http://ascelibrary.org/doi/abs/10.1061/(ASCE)0733-9399(1997).10.1061/(ASCE)0733-9399(1997)
  • Christensen, D.W. and Anderson, D.A. , 1992. Interpretation of dynamic mechanical test data for paving grade asphalt cements (with discussion). Journal of the Association of Asphalt Paving Technologists , 61, 67–116.
  • D’Angelo, J. , et al. , 2007. Revision of the superpave high temperature binder specification: the multiple stress creep recovery test (with discussion). Journal of the Association of Asphalt Paving Technologists , 76, 123–162. Available from: http://trid.trb.org/view.aspx?id=839413 [ Accessed 22 October 2014].
  • Franck, A. J. , 2014. Normal stresses in shear flow . TA Instruments Internal Reports. Report No. AN007.
  • Gie, Y. and Chan, B. , 1984. Non-newtonian shear viscosity, normal stress coefficients and corresponding states in rheology. Physics Letters , 101A (7), 7–11. Available from: http://www.sciencedirect.com/science/article/pii/037596018490851X [ Accessed 19 August 19 2014].
  • Golalipour, A. , 2011. Modification of multiple stress creep recovery test procedure usage in specification . Madison, WI : University of Wisconsin. Available from: http://144.92.161.87/handle/1793/56398 [ Accessed 22 October 2013].
  • Gordon, A. , Rahimzadeh, B. , and Collop, A.C. , 2004. Linear rheological behavior of bituminous paving materials. Journal of Materials in Civil Engineering , 16 (3), 212–220. Available from: http://ascelibrary.org/doi/abs/10.1061/(ASCE)0899-1561(2004) [ Accessed 20 August 2014].
  • Huang, C.-W. , et al. , 2011. Three-dimensional simulations of asphalt pavement permanent deformation using a nonlinear viscoelastic and viscoplastic model. Journal of Materials in Civil Engineering , 23 (1), 56–68. Available from: http://ascelibrary.org/doi/pdf/10.1061/(ASCE)MT.1943-5533.0000022 [ Accessed 18 May 2014].10.1061/(ASCE)MT.1943-5533.0000022
  • Masad, E. and Somadevan , 2002. Microstructural finite-element analysis of influence of localized strain distribution on asphalt mix properties. Journal of Engineering Mechanics , (10), 1105–1114. Available from: http://ascelibrary.org/doi/abs/10.1061/(ASCE)0733-9399(2002) [ Accessed 10 April 2014].10.1061/(ASCE)0733-9399(2002)128:10(1106)
  • Masad, E. , et al ., 2009. Characterization of asphalt binder resistance to permanent deformation based on nonlinear viscoelastic analysis of multiple stress creep recovery (MSCR) test. In: Asphalt paving technology 2009, AAPT . Minneapolis : Association of Asphalt Paving Technologist, 535–562. Available from: http://trid.trb.org/view.aspx?id=918744 [ Accessed 23 January 2014].
  • PQ Corporation , 2014. Advera warm mix asphalt. Available from: http://www.adverawma.com/wma.html.
  • Sadek, H. , et al. , 2013. Implementation of mechanistic-empirical pavement analysis in the state of Qatar. International Journal of Pavement Engineering , 15 (6), 495–511. Available from: http://www.tandfonline.com/doi/abs/10.1080/10298436.2013.837164 [ Accessed 13 September 2013].
  • Sadek, H. , et al. , 2014. Performance evaluation of full-scale sections of asphalt pavement in the state of Qatar. Journal of Performance of Constructed Facilities , 29 (5).
  • Sadeq, M. , et al ., 2015. Assessment of linear and nonlinear viscoelastic responses of warm-mix asphalt binders. In: 6th international conference bituminous mixtures & pavements . Ancona: Taylor & Francis Group, 27–32.
  • Sadeq, M. , et al ., 2016. Rheological evaluation of short- and long-term performance for warm mix asphalt (WMA) binders. In: F. Canestrari and M.N. Partl , eds. 8th RILEM international symposium on testing and characterization of sustainable and innovative bituminous materials SE – 11. RILEM bookseries . Springer, Netherlands, 129–139. Available from: http://dx.doi.org/10.1007/978-94-017-7342-3_11.10.1007/978-94-017-7342-3
  • Sasol , 2014. Recommended dosage of sasobit®. Product Information Report. Issued December 2014. (Accessed March 2015).
  • Sasol Wax , 2014. Sasobit – Sasolwax US. Available from: http://www.sasolwax.us.com/.
  • Schapery, R. , 1969. On the characterization of nonlinear viscoelastic materials. Polymer Engineering & Science , 9 (4), 295–310. Available from: http://onlinelibrary.wiley.com/doi/10.1002/pen.760090410/abstract [ Accessed 9 February 2014].
  • Shirodkar, P. , et al ., 2012. Characterization of creep and recovery curve of polymer modified binder. Construction and Building Materials , 34, 504–511. Available from: http://linkinghub.elsevier.com/retrieve/pii/S0950061812000955 [ Accessed 23 May 2013].10.1016/j.conbuildmat.2012.02.018
  • Stuart, K. , Mogawer, W. , and Romero, P. , 1999. Validation of asphalt binder and mixture test that measured rutting susceptibility using the accelerated loading facility . Virginia, VA : McLean.
  • Williams, M.L. , Landel, R.F. , and Ferry, J.D. , 1955. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids. Journal of the American Chemical Society , 77 (14), 3701–3707.10.1021/ja01619a008
  • Yusoff, N. , Shaw, M. , and Airey, G. , 2012. Modelling the linear viscoelastic rheological properties of bituminous binders . University of Nottingham. Available from: http://www.sciencedirect.com/science/article/pii/S0950061810006161 [ Accessed 4 November 2013].
  • Zelelew, H. , et al. , 2013. Laboratory evaluation of the mechanical properties of plant-produced warm-mix asphalt mixtures. Road Materials and Pavement Design , 14 (1), 49–70.10.1080/14680629.2012.735799
  • Zelelew, H. , et al. , 2013. Laboratory evaluation of the mechanical properties of plant-produced warm-mix asphalt mixtures. Road Materials and Pavement Design , 14 (1), 49–70. Available from: http://www.tandfonline.com/doi/abs/10.1080/14680629.2012.735799.10.1080/14680629.2012.735799

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.