Quality assurance and quality control of subgrade compaction using the dynamic cone penetrometer

References

• American Society for Testing and Materials-D6951 , 2015. Standard test method for use of the dynamic cone penetrometer in shallow pavement applications .
   Google Scholar
• American Society for Testing and Materials-D7380 , 2015. Standard test method for soil compaction determination at shallow depths using 5-lb (2.3 kg) dynamic cone penetrometer .
   Google Scholar
• Amini, F. , 2003. Potential applications of dynamic and static cone penetrometers in MDOT pavement design and construction . Jackson, MS.
   Google Scholar
• Ayers, M. , Thompson, M. , and Uzarski, D. , 1989. Rapid shear strength evaluation of in situ granular materials. Transportation Research Record , 1227, 134–146.
   Google Scholar
• Bester, M. and Hallat, L. , 1977. Dynamic cone penetrometer . Pretoria: University of Pretoria.
   Google Scholar
• Boutet, M. , Doré, G. , Bilodeau, J.-P. , et al. , 2011. Development of models for the interpretation of the dynamic cone penetrometer data. International Journal of Pavement Engineering , 12 (3), 201–214.10.1080/10298436.2010.488727
   Web of Science ®Google Scholar
• Burnham, T. , 1997. Application of dynamic cone penetrometer to Minnesota department of transportation pavement assessment procedures . Maplewood, MN: Minnesota Department of Transportation.
   Google Scholar
• Carraro, J. , Prezzi, M. , and Salgado, R. , 2009. Shear strength and stiffness of sands containing plastic or nonplastic fines. Journal of Geotechnical and Geoenvironmental Engineering , 135 (9), 1167–1178.10.1061/(ASCE)1090-0241(2009)135:9(1167)
   Web of Science ®Google Scholar
• Chen, J. , Hossain, M. , and Latorella, T.M. , 1999. Use of falling weight deflectometer and dynamic cone penetrometer in pavement evaluation. Transportation Research Record: Journal of the Transportation Research Board , 1655 (1999), 145–151.10.3141/1655-19
   Google Scholar
• Chen, D. , et al. , 2005. A correlation between dynamic cone penetrometer values and pavement layer moduli. Geotechnical Testing Journal , 28 (1), 1–8.
   Web of Science ®Google Scholar
• Dai, S. and Kremer, C. , 2006. Improvement and Validation of Mn/DOT DCP specifications for aggregate base materials and select granular test . Maplewood, MN: Minnesota Department of Transportation.
   Google Scholar
• Davich, P. , Camargo, F. , and Larsen, B. , 2006. Validation of DCP and LWD moisture specifications for granular materials . Maplewood, MN: Minnesota Department of Transportation.
   Google Scholar
• Devore, J. , 2012. Probability and statistics for engineering and the sciences . 8th ed. Boston, MA: Cengage Learning.
   Google Scholar
• Gabr, M. and Hopkins, K. , 2000. DCP criteria for performance evaluation of pavement layers. Journal of Performance of Constructed Facilities , 14 (4), 141–148.10.1061/(ASCE)0887-3828(2000)14:4(141)
   Google Scholar
• George, V. , Rao, N. , and Shivashankar, R. , 2009. PFWD, DCP and CBR correlations for evaluation of lateritic subgrades. International Journal of Pavement Engineering , 10 (3), 189–199.10.1080/10298430802342765
   Web of Science ®Google Scholar
• George, K. and Uddin, W. , 2000. Subgrade characterization for highway pavement design . Final Report. Mississippi Department of Transportation University of Mississippi.
   Google Scholar
• Harison, J.A. , 1987. Correlation between California bearing ratio and dynamic cone penetrometer strength measurement of soils. ICE Proceedings , 83 (4), 833–844.
   Google Scholar
• Holtz, R.D. , Kovacs, W.D. , and Sheahan, T.C. , 2010. An introduction to geotechnical engineering . 2nd ed. Englewood Cliffs, NJ: Prentice Hall.
   Google Scholar
• Hossain, M.S. and Apeagyei, A.K. , 2010. Evaluation of the lightweight deflectometer for in-situ determination of pavement layer moduli . Charlottesville, VA: Virginia Transportation Research Council.
   Google Scholar
• Indiana Department of Transportation , 2012. Standard Specifications. Indianapolis, IN: Indiana Department of Transportation.
   Google Scholar
• Iowa Department of Transportation , 2012. Standard Specifications. Ames, IA: Iowa Department of Transportation.
   Google Scholar
• Jayawickrama, P. , Amarasiri, A. , and Regino, P. , 2000. Use of dynamic cone penetrometer to control compaction of granular fill. Transportation Research Record: Journal of the Transportation Research Board , 1736 (1), 71–80.10.3141/1736-10
   Google Scholar
• Johnson, A.W. and Sallberg, J.R. , 1960. Factors that influence the field compaction of soils. Highway Research Board Bulletin , Monograph, 206–272.
   Google Scholar
• Kim, H. , 2014. Dynamic analysis of dynamic cone penetration test for subgrade compaction assessment . Ph.D. thesis submitted to the Faculty of Purdue University, West Lafayette, IN.
   Google Scholar
• Kim, H. , Prezzi, M. , and Salgado, R. , 2010. Use of dynamic cone penetration and Clegg Hammer tests for quality control of roadway compaction and construction. JTRP Technical Reports. West Lafayette, IN: Joint Transport Research Program.
   Google Scholar
• Kleyn, E.G. , 1975. The use of the dynamic cone penetrometer (DCP). Monograph, Transvaal Provincial Administration.
   Google Scholar
• Larsen, B. , White, D. , and Jahren, C. , 2008. Evaluation of dynamic cone penetration quality for cohesive soil embankment construction; pilot project for new specification for quality control and quality assurance. Transportation Research Record: Journal of the Transportation Research Board , 2081, 92–100.10.3141/2081-10
   Web of Science ®Google Scholar
• Livneh, M. and Livneh, N.A. , 2013. The use of the dynamic cone penetrometer for quality control of compaction operations. International Journal of Engineering Research in Africa , 10 (1), 49–64.10.4028/www.scientific.net/JERA.10
   Google Scholar
• Mejías-Santiago, M. , García, L. , and Edwards, L. , 2015. Assessment of material strength using dynamic cone penetrometer test for pavement applications. In: John Harvey and Katie F. Chou , eds. Airfield and highway pavements . Miami, FL: American Society of Civil Engineering, 837–848.
   Google Scholar
• Minnesota Department of Transportation , 2014. Standard Specifications for Construction. Maplewood, MN: Minnesota Department of Transportation.
   Google Scholar
• Mitchell, J. , 1976. Fundamentals of soil behaviour . 1st ed. Hoboken, NJ: John Wiley & Sons.
   Google Scholar
• Mooney, M. , Nocks, C. , and Selden, K. , 2008. Improving quality assurance of MSE wall and bridge approach earthwork compaction . Denver, CO: Colorado Department of Transportation.
   Google Scholar
• National Cooperative Highway Research Program , 2014. Non-nuclear methods for compaction control of unbound materials . Washington, DC: Transportation Research Board.
   Google Scholar
• Oman, M. , 2004. Advancement of grading & base material testing . Maplewood, MN: Minnesota Department of Transportation, Office of Materials.
   Google Scholar
• Petersen, L. and Peterson, R. , 2006. Intelligent compaction and in-situ testing at Mn/DOT TH53 . St. Paul, MN: Minnesota Department of Transportation.
   Google Scholar
• Quintus, H.V. , Rao, C. , and Robert E. Minchin, Jr , 2008. Supporting Materials for NCHRP . Report 626. Washington DC: National Cooperative Highway Research Program.
   Google Scholar
• Rathje, E.M. , et al. , 2006. Evaluation of non-nuclear methods for compaction control . Austin, TX: The University of Texas at Austin.
   Google Scholar
• Rodriguez, A.R. , Del Castillo, H. , and Sowers, G.F. , 1988. Soil mechanics in highway engineering . 1st ed. Clausthal-Zellerfeld: Trans Tech Publications.
   Google Scholar
• Salgado, R. , Bandini, P. , and Karim, A. , 2000. Shear strength and stiffness of silty sand. Journal of Geotechnical and Geoenvironmental Engineering , 126 (5), 451–462.10.1061/(ASCE)1090-0241(2000)126:5(451)
   Web of Science ®Google Scholar
• Salgado, R. and Yoon, S. , 2003. Dynamic cone penetration test (DCPT) for subgrade assessment , JTRP Technical Reports. West Lafayette, IN: Joint Transport Research Program.10.5703/1288284313196
   Google Scholar
• Siekmeier, J.A. , Young, D. , and Beberg, D. , 2000. Comparison of the dynamic cone penetrometer with other tests during subgrade and granular base characterization in Minnesota. In: S.D. Tayabji and E.O. Lukanen , eds. Nondestructive testing of pavements and back calculation of moduli . Vol. 3. West Conshohocken, PA: ASTM International.
   Google Scholar
• Siekmeier, J. , et al. , 2009. Using the dynamic cone penetrometer and light weight deflectometer for construction quality assurance . Maplewood, MN: Minnesota Department of Transportation.
   Google Scholar
• Skempton, A. , 1953. The colloidal activity of clays. In: 3rd International conference on Soil Mechanics and Foundation Engineering . Zurich: Organizing Committee ICOSOMEF, 57–60.
   Google Scholar
• Transport Research Board , 2009. Glossary of highway quality assurance terms . 1st ed. Washington DC: Transportation Research Board.
   Google Scholar
• Vuuren, D.J.V. , 1969. Rapid determination of CBR with the portable dynamic cone penetrometer . Vermont South, VIC.
   Google Scholar
• Webster, S. , Grau, R. , and Williams, T. , 1992. Description and application of dual mass dynamic cone penetrometer . Vicksburg, MS.
   Google Scholar
• White, D. and Vennapusa, P. , 2009. Alternatives to heavy test rolling for cohesive subgrade assessment. In: Erol Tutumluer and I. L. Al-Qadi , eds. Bearing capacity of roads, railways and airfields . Leiden: CRC Press, 45–55.
   Google Scholar