516
Views
10
CrossRef citations to date
0
Altmetric
Original Articles

Influence of warm mix additive and loading rate on rutting of warm mix asphalt pavement

, & ORCID Icon
Pages 366-381 | Received 07 Jan 2017, Accepted 05 Feb 2017, Published online: 28 Mar 2017

References

  • AASHTO R 30-2 , 2006. Standard practice for mixture conditioning of hot mix asphalt (HMA) . Washington DC, USA: American Association of State Highway and Transportation Officials.
  • AASHTO TP79 , 2010. Determining the dynamic modulus and flow number for hot mix asphalt (HMA) using the asphalt mixture performance tester (AMPT) . Washington DC, USA: American Association of State Highway and Transportation Officials.
  • Arega, Z. and Bhasin, A. , 2012. Interim report: binder rheology and performance in warm mix asphalt. FHWA/TX-12/0-6591-2. Austin: The University of Texas.
  • ASTM D 6373 , 2015. Standard specification for performance graded asphalt binder . West Conshohocken, Pennsylvania, USA: ASTM International.
  • ASTM D 7981 , 2015. Standard practice for compaction of prismatic asphalt specimens by means of the shear box compactor . West Conshohocken, Pennsylvania, USA: ASTM International.
  • ASTM D 2872 , 2004. Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test) . West Conshohocken, Pennsylvania, USA: ASTM International.
  • Banerjee, A. , de Fortier Smit, A. , and Prozzia, J.A. , 2012. The effect of long-term aging on the rheology of warm mix asphalt binders. Fuel , 97, 603–611.
  • Biro, S. , Gandhi, T. , and Amirkhanian, S. , 2009. Midrange temperature rheological properties of warm asphalt binders. Journal of Materials in Civil Engineering , 21 (7), 316–323.
  • Bonaquist, R.F. , 2011. NCHRP 691: mix design practices for warm mix asphalt . Washington, DC, USA: Transportation Research Board.
  • Bower, N. , 2011. Laboratory evaluation of performance of warm mix asphalt in Washington state . Thesis (PhD). Washington, USA: Washington State University.
  • BS-EN-12697-22 , 2003. Bituminous mixtures test methods for hot mix asphalt -- part 22: wheel tracking . London: British Standards Institution BSI.
  • Buss, A. and Williams, R.C. , 2012. Warm mix asphalt performance modeling using the mechanistic-empirical pavement design guide. 7th RILEM international conference on cracking in pavements . Delft, Netherlands: Springer, 1323-–1332.
  • D’Angelo, J. , Kluttz, R. , Dongre, R.N. , Stephens, K. , and Zanzotto, L. , 2007. Revision of the superpave high temperature binder specification: The multiple stress creep recovery test (With Discussion). Journal of the Association of Asphalt Paving Technologists , 76, 123–162.
  • Francken, L. , 1977. Pavement deformation law of bituminous road mixes in repeated load triaxial compression. Fourth international conference on the structural design of asphalt pavements . USA: University of Michigan, 483–496.
  • Gayathri, V.G. , Rajasekar, Y.P. , Roja, K.L. , Krishnan, J.M. , 2016. Influence of confinement pressure on the development of three stage curve for bituminous mixtures. Transportation in Developing Economies , 2 (2), 1–8.
  • Goh, S.W. , You, Z. , and Van Dam, T.J. , 2007. Laboratory evaluation and pavement design for warm mix asphalt. Proceedings of the 2007 Mid-Continent transportation research symposium . Ames, Iowa: Iowa state university, 1–11.
  • Hajj, E. , Ulloa, A. , Siddharthan, R. , Sebaaly, P. , 2010. Estimation of stress conditions for the flow number simple performance test. Transportation Research Record: Journal of the Transportation Research Board , 2181, 67–78.
  • Hasan, M.R.M. , Goh, S.W. , and You, Z. , 2013. Comparative study on the properties of WMA mixture using foamed admixture and free water system. Construction and Building Materials , 48, 45–50.
  • Hurley, G.C. and Prowell, B.D. , 2005. Evaluation of Sasobit for use in warm mix asphalt . National center for asphalt technology. Vol 5. Auburn, Alabama: Auburn University.
  • Hurley, G.C. and Prowell, B.D. , 2006. Evaluation of evotherm for use in warm mix asphalt . National center for asphalt technology. Vol 2. Auburn, Alabama: Auburn University.
  • IRC 37 , 2012. Guidelines for the design of flexible pavements, third revision . New Delhi, India: Indian Roads Congress.
  • IRC SP 101 , 2014. Interim guidelines for warm mix asphalt . New Delhi, India: Indian Roads Congress.
  • IS 73 , 2013. Indian standard for paving bitumen-specification (fourth revision) . New Delhi, India: Bureau of Indian Standards.
  • Jamshidi, A. , Hamzah, M.O. , and Aman, M.Y. , 2012. Effects of Sasobit content on the rheological characteristics of unaged and aged asphalt binders at high and intermediate temperatures. Materials Research , 15 (4), 628–638.
  • Jamshidi, A. , Hamzah, M.O. , and You, Z. , 2013. Performance of warm mix asphalt containing Sasobit: state-of-the-art. Construction and Building Materials , 38, 530–553.
  • Khodaii, A. and Mehrara, A. , 2009. Evaluation of permanent deformation of unmodified and SBS modified asphalt mixtures using dynamic creep test. Construction and Building Materials , 23 (7), 2586–2592.
  • Masad, E.A. , Huang, C.W. , DAngelo, J. , and Little, D.N. , 2009. Characterization of asphalt binder resistance to permanent deformation based on nonlinear viscoelastic analysis of multiple stress creep recovery (MSCR) test. Journal of the Association of Asphalt Paving Technologists , 78, 535–566.
  • M-E PDG , 2008. Mechanistic empirical pavement design guide: a manual practice . Washington, DC, USA: American Association of State Highway and Transportation Officials.
  • Mohammad, L.N. , Hassan, M.M. , Vallabhu, B. , Kabir, M.S. , 2014. Louisiana experience with WMA technologies: mechanistic, environmental, and economic analysis. Journal of Materials in Civil Engineering , 27 (6), 04014185-1–04014185-13.
  • MoRTH , 2013. Specification for Road & Bridge Works, Fifth Revision . New Delhi, India: IRC publications, Ministry of Road Transport & Highways.
  • Narayan, S.P. , Krishnan, J.M. , Little, D.N. , and Rajagopal, K.R. , 2016. Mechanical behaviour of asphalt binders at high temperatures and specification for rutting. International Journal of Pavement Engineering . 1–12.
  • Nivitha, M. and Krishnan, J. , 2014. Development of pavement temperature contours for India. Journal of The Institution of Engineers (India): Series A , 95 (2), 83–90.
  • Podolsky, J.H. , Buss, A. , Williams, R.C. , and Cochran, E. , 2016. Mechanistic empirical performance of warm-mix asphalt with select bio-derived additives in the Midwestern United States using AASHTOWare pavement ME design. Road Materials and Pavement Design , 1–17.
  • Porras, J. , Hajj, E. , Sebaaly, P. , Kass, S. , and Liske, T. , 2012. Performance evaluation of field-produced warm-mix asphalt mixtures in Manitoba, Canada. Journal of the Transportation Research Board , 2294, 64–73.
  • Prowell, B. , Hurley, G. , and Crews, E. , 2007. Field performance of warm-mix asphalt at national center for asphalt technology test track. Transportation Research Record: Journal of the Transportation Research Board , 1998, 96–102.
  • Qin, Y. , Wang, S.Y. , Zeng, W. , Shi, X.P. , Xu, J. , Huang, S.C. , 2012. The Effect of asphalt binder aging on fatigue performance of Evotherm WMA. Advanced Engineering Materials II , 535, 1686–1692.
  • Roja, K.L. , Roy, N. , and Krishnan, J.M. , 2015. Influence of aging on the rheological behavior of warm mix asphalt binders. 8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials . Netherlands, Ancona, Italy: Springer, 497–508.
  • Roy, N. , Veeraragavan, A. , and Krishnan, J.M. , 2016. Influence of confinement pressure and air voids on the repeated creep and recovery of asphalt concrete mixtures. International Journal of Pavement Engineering , 17 (2), 133–147.
  • Sargand, S. , Nazzal, M.D. , Al-Rawashdeh, A. , and Powers, D. , 2011. Field evaluation of warm-mix asphalt technologies. Journal of Materials in Civil Engineering , 24 (11), 1343–1349.
  • Savio, D. , Paul, P. , and Krishnan, J.M. , 2016. Statistical analysis of axle load data and pavement damage for a few National Highways in India. Functional pavement design . London: Taylor & Francis Group.
  • Toraldo, E. , Brovelli, C. , and Mariani, E. , 2013. Laboratory investigation into the effects of working temperatures on wax-based warm mix asphalt. Construction and Building Materials , 44, 774–780.
  • Vargas-Nordcbeck, A. and Timm, D.H. , 2012. Rutting characterization of warm mix asphalt and high RAP mixtures. Road Materials and Pavement Design , 13 (sup1), 1–20.
  • Von Quintus, H.L. , 2012. NCHRP 719: Calibration of rutting models for structural and mix design . Washington, DC: Transportation Research Board.
  • Wang, Y. , Norouzi, A. , and Kim, Y.R. , 2016. Comparison of fatigue cracking performance of asphalt pavements predicted by pavement ME and LVECD Programs. Thesis (PhD). Raleigh, North Carolina: North Carolina State University.
  • West, R. , Rodezno, C. , Julian, G. , Prowell, B. , Frank, B. , Osborn, L.V. , and Kriech, T. , 2014. NCHRP 779: Field performance of warm mix asphalt technologies . Washington, DC: Transportation research board.
  • Xiao, F. , Zhao, W. , and Amirkhanian, S. , 2009. Fatigue behavior of rubberized asphalt concrete mixtures containing warm asphalt additives. Construction and Building Materials , 23, 3144–3151.
  • Zelelew, H. , Paugh, C. , Corrigan, M. , Belagutti, S. , and Ramakrishnareddy, J. , 2013. Laboratory evaluation of the mechanical properties of plant-produced warm-mix asphalt mixtures. Road Materials and Pavement Design , 14 (1), 49–70.
  • Zhang, J. , 2010. Effects of warm-mix asphalt additives on asphalt mixture characteristics and pavement performance . Thesis (PhD). University of Nebraska.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.