Dynamic mechanical analysis of crumb rubber modified asphalt binder containing warm mix additives

References

• Akisetty, C.K. , et al. , 2010. Analysis of rheological properties of rubberized binders containing warm asphalt additives. Canadian Journal of Civil Engineering , 37 (5), 763–771.
   Web of Science ®Google Scholar
• Akisetty, C. , et al. , 2011. Estimating correlations between rheological and engineering properties of rubberized asphalt concrete mixtures containing warm mix asphalt additive. Construction and Building Materials , 25 (2), 950–956.
   Web of Science ®Google Scholar
• Akisetty, C.K. , Lee, S.-J. , and Amirkhanian, S.N. , 2009. High temperature properties of rubberized binders containing warm asphalt additives. Construction and Building Materials , 23 (1), 565–573.
   Web of Science ®Google Scholar
• Arega, Z. , et al. , 2011. Influence of warm-mix additives and reduced aging on the rheology of asphalt binders with different natural wax contents. Journal of Materials in Civil Engineering , 23 (10), 1453–1459.
   Web of Science ®Google Scholar
• Ashish, P. , Singh, D. , and Bohm, S. , 2016. Investigation on influence of nanoclay addition on rheological performance of asphalt binder. Road Materials and Pavement , 18 (5), 1–20.
   Web of Science ®Google Scholar
• Biro, S. , Gandhi, T. , and Amirkhanian, S. , 2009a. Midrange temperature rheological properties of warm asphalt binders. Journal of Materials in Civil Engineering , 21 (7), 316–323.
   Web of Science ®Google Scholar
• Biro, S. , Gandhi, T. , and Amirkhanian, S. , 2009b. Determination of zero shear viscosity of warm asphalt binders. Construction and Building Materials , 23 (5), 2080–2086.
   Web of Science ®Google Scholar
• Bocoum, A. and Hosseinnezhad, S. , 2014. Investigating effect of amine based additives on asphalt rubber rheological properties. In: 12th ISAP international conference on asphalt pavements . Taylor and Francis-Balkema, Vol. 1, 921–931.
   Google Scholar
• Chamoun, Z. , et al. , 2015. Evaluation of select warm mix additives with polymer and rubber modified asphalt mixtures. Canadian Journal of Civil Engineering , 42 (6), 377–388.
   Web of Science ®Google Scholar
• Chappat, M. and Bilal, J. , 2003. The environmental road of the future: life cycle analysis. In: Colas SA, Paris , Vol. 9, 1–34.
   Google Scholar
• D’Angelo, J. , 2009. Development of a performance based binder specification for rutting using creep and recovery testing. PhD thesis. Calgary: University of Calgary.
   Google Scholar
• D’Angelo, J. , 2011. The relationship of the MSCR test to rutting the relationship of the MSCR test to rutting. Road Materials and Pavement Design , ( January 2013), 37–41.
   Web of Science ®Google Scholar
• D’Angelo, J.A. , et al. , 2008. Warm-mix asphalt: European practice . Washington, DC, United States. No. FHWA-PL-08-007.
   Google Scholar
• D’Angelo, J. and Dongré, R. , 2009. Practical use of multiple stress creep and recovery test. Transportation Research Record: Journal of the Transportation Research Board , 2126 (1), 73–82.
   Google Scholar
• Diab, A. and You, Z. , 2014. Rheological properties of short-term aged foamed asphalt modified with nano hydrated lime. In: CICTP 2014: safe, smart, and sustainable multimodal transportation systems . China, 1043–1050.
   Google Scholar
• Divya, P.S. , Gideon, C.S. , and Krishnan, J.M. , 2012. Influence of the type of binder and crumb rubber on the creep and recovery of crumb rubber modified bitumen. Journal of Materials in Civil Engineering , 25 (4), 438–449.
   Web of Science ®Google Scholar
• Gandhi, T.S. and Amirkhanian, S.N. , 2007. Laboratory investigation of warm asphalt binder properties – a preliminary analysis. In: The fifth international conference on maintenance and rehabilitation of pavements and technological control (MAIREPAV5) . Park City, UT, 475–480.
   Google Scholar
• Habal, A. and Singh, D. , 2016. Moisture susceptibility of a crumb rubber modified binder containing WMA additives using the surface free energy approach. In: Geotechnical special publication . Reston, VA: Geo-China. ASCE, 245–253.
   Google Scholar
• Hamzah, M.O. , et al. , 2015. Evaluation of rediset for use in warm-mix asphalt: a review of the literatures. International Journal of Pavement Engineering , 16 (9), 809–831.
   Web of Science ®Google Scholar
• Hamzah, M. and Golchin, B. , 2013. A laboratory investigation on the rheological properties of asphalt binder containing rediset. Journal of the Eastern Asia Society for Transportation Studies , 10, 1537–1550.
   Google Scholar
• Hossain, Z. , et al. , 2012. Effectiveness of water-bearing and anti-stripping additives in warm mix asphalt technology. International Journal of Pavement Engineering , 13 (5), 424–432.
   Web of Science ®Google Scholar
• Hurley, G.C. and Prowell, B.D. , 2005. Evaluation of Sasobit® for use in warm mix asphalt. NCAT Report , 5 (6), 1–27.
   Google Scholar
• Jamshidi, A. , Hamzah, M. , and You, Z. , 2013. Performance of warm mix asphalt containing Sasobit®: State-of-the-art. Construction and Building Materials , 38, 530–553.
   Web of Science ®Google Scholar
• Kataware, A.V. and Singh, D. , 2016. Evaluating the rutting performance of a polymer-modified binder containing WMA additives using different rheological parameters. In: Geotechnical special publication . Reston, VA: American Society of Civil Engineers, 126–134.
   Google Scholar
• Lee, S.-J. , Akisetty, C.K. , and Amirkhanian, S.N. , 2008. The effect of crumb rubber modifier (CRM) on the performance properties of rubberized binders in HMA pavements. Construction and Building Materials , 22 (7), 1368–1376.
   Web of Science ®Google Scholar
• Menapace, I. , Masad, E. , and Little, D. , 2014. Microstructural, chemical and thermal analyses of Warm Mix Asphalt. In: Sustainability, ecoefficiency and conservation in transportation infrastructure asset management . London, 157–168.
   Google Scholar
• Mohd Hasan, M.R. , Goh, S.W. , and You, Z. , 2013. Comparative study on the properties of WMA mixture using foamed admixture and free water system. Construction and Building Materials , 48, 45–50.
   Web of Science ®Google Scholar
• Mohd Hasan, M.R. , You, Z. , and Yang, X. , 2017. A comprehensive review of theory, development, and implementation of warm mix asphalt using foaming techniques. Construction and Building Materials , 152, 115–133.
   Web of Science ®Google Scholar
• Oliveira, J.R.M. , et al. , 2013. Use of a warm mix asphalt additive to reduce the production temperatures and to improve the performance of asphalt rubber mixtures. Journal of Cleaner Production , 41, 15–22.
   Web of Science ®Google Scholar
• Palit, S.K. , Reddy, K.S. , and Pandey, B.B. , 2004. Laboratory evaluation of crumb rubber modified asphalt mixes. Journal of Materials in Civil Engineering , 16 (1), 45–53.
   Web of Science ®Google Scholar
• Rodríguez-Alloza, A.M. , et al. , 2014. High and low temperature properties of crumb rubber modified binders containing warm mix asphalt additives. Construction and Building Materials , 53, 460–466.
   Web of Science ®Google Scholar
• Rubio, M.C. , et al. , 2012. Warm mix asphalt: an overview. Journal of Cleaner Production , 24, 76–84.
   Web of Science ®Google Scholar
• Rühl, R. , et al. , 2007. Bitumen emissions on workplaces in Germany. Journal of Occupational and Environmental Hygiene , 4 (Suppl 1), 77–86.
   Google Scholar
• Sampath, A. , 2010. Comprehensive evaluation of four warm asphalt mixture regarding viscosity, tensile strength, moisture sensitivity, dynamic modulus and flow number . M.S. thesis, Iowa City, IA: University of Iowa.
   Google Scholar
• Su, K. , Maekawa, R. , and Hachiya, Y. , 2009. Laboratory evaluation of WMA mixture for use in airport pavement rehabilitation. Construction and Building Materials , 23 (7), 2709–2714.
   Web of Science ®Google Scholar
• Wang, H. , et al. , 2012. Effect of warm mixture asphalt (WMA) additives on high failure temperature properties for crumb rubber modified (CRM) binders. Construction and Building Materials , 35, 281–288.
   Web of Science ®Google Scholar
• Xiao, F. , Punith, V.S. , and Amirkhanian, S.N. , 2012. Effects of non-foaming WMA additives on asphalt binders at high performance temperatures. Fuel , 94, 144–155.
   Web of Science ®Google Scholar
• Xiao, F. , Wenbin Zhao, P.E. , and Amirkhanian, S.N. , 2009. Fatigue behavior of rubberized asphalt concrete mixtures containing warm asphalt additives. Construction and Building Materials , 23 (10), 3144–3151.
   Web of Science ®Google Scholar
• Yu, X. , Leng, Z. , and Wei, T. , 2014. Investigation of the rheological modification mechanism of warm-mix additives on crumb-rubber-modified asphalt. Journal of Materials in Civil Engineering , 26 (2), 312–319.
   Web of Science ®Google Scholar
• Zapata, P. and Gambatese, J.A. , 2005. Energy consumption of asphalt and reinforced concrete pavement materials and construction. Journal of Infrastructure Systems , 11 (1), 9–20.
   Web of Science ®Google Scholar