Induction heating technology for improving compaction of asphalt joints

References

• Akpinar, M.V. and Hossain, M., 2004. Longitudinal joint construction for hot mix asphalt pavements. Report No. K-TRAN: KSU-98-4. Kansas Department of Transportation.
   Google Scholar
• Apostolidis, P., et al., 2016. Advanced evaluation of asphalt mortar for induction healing purposes. Construction and Building Materials, 126, 9–25. doi: 10.1016/j.conbuildmat.2016.09.011
   Web of Science ®Google Scholar
• Apostolidis, P., et al., 2017. Toward the design of an induction heating system for asphalt pavements with the finite element method. Transportation Research Record: Journal of the Transportation Research Board, 2633, 136–146. doi: 10.3141/2633-16
   Google Scholar
• Australian Asphalt Pavement Association (AAPA), 1997. Asphalt joints. Available from Asphalt work tips.
   Google Scholar
• Bueno, M., Arraigada, M., and Partl, M.N, 2016. Damage detection and artificial healing of asphalt concrete after trafficking with a load simulator. Mechanics of Time-Dependent Materials, 20, 265–279. doi: 10.1007/s11043-016-9306-z
   Web of Science ®Google Scholar
• Buncher, M., 2012. The best way to roll a joint and everything else you should know about constructing longitudinal joints. The Ontario Hot Mix Producer’s Association magazine, Asphaltopics Spring 2012.
   Google Scholar
• Canestrari, F., et al., 2005. Repeatibility of interlayer shear resistance determined with two test procedures. In: Proc. 3rd Int. SIIV Congress, Bari, Italy.
   Google Scholar
• CEN 12697-26, 2012. Bituminous mixtures – test methods for hot mix asphalt – part 26: Stiffness. European Committee for Standardization CEN, Brussels.
   Google Scholar
• Fleckenstein, L.J., Allen, D.L., and Schultz, D.B., 2002. Compaction at the longitudinal construction joint in asphalt pavements. Rep. No. KTC-02-10/SPR 208-00-1F, Kentucky Transportation Research Center, Univ. of Kentucky, Lexington, KY.
   Google Scholar
• Garcia, A., et al., 2013. Induction healing of dense asphalt concrete. Construction and Building Materials, 49, 1–7. doi: 10.1016/j.conbuildmat.2013.07.105
   Web of Science ®Google Scholar
• García, A., et al., 2014. Influence of steel wool fibers on the mechanical, thermal and healing properties of dense asphalt concrete. Journal of Testing and Evaluation, 42, 1–12. doi: 10.1520/JTE20130197
   Web of Science ®Google Scholar
• García, A., et al., 2015. Single and multiple healing of porous and dense asphalt concrete. Journal of Intelligent Material Systems and Structures, 26, 425–433. doi: 10.1177/1045389X14529029
   Web of Science ®Google Scholar
• Ghafoori Roozbahanay, E., Partl, M.N., and Jakub, W.P., 2013. Fracture testing for the evaluation of asphalt pavement joints. Road Materials and Pavement Design, 14 (4), 764–791. doi: 10.1080/14680629.2013.812979
   Web of Science ®Google Scholar
• Hean, S. and Bernhard, A., 2014. Anforderungen an Anschlussfugensysteme in Asphaltdecken - Teil 1: Aufnahme der bestehenden Praxiserfahrung; Forschungsprojekt VSS 2007/401 auf Antrag des Schweizerischen Verbands der Strassen- und Verkehrsfachleute (VSS), 1485, UVEK, Bundesamt für Strassen.
   Google Scholar
• Jeoffroy, E., et al., 2016. Iron oxide nanoparticles for magnetically-triggered healing of bituminous materials. Construction and Building Materials, 112, 497–505. doi: 10.1016/j.conbuildmat.2016.02.159
   Web of Science ®Google Scholar
• Jeoffroy, E., et al., 2018. Iron-based particles for the magnetically-triggered crack healing of bituminous materials. Construction and Building Materials, 164, 775–782. doi: 10.1016/j.conbuildmat.2017.12.223
   Web of Science ®Google Scholar
• Kandhal, P.S., 2007. Evaluation of various longitudinal joint construction techniques for asphalt airfield pavements. FAA Worldwide airport technology transfer conference, Atlantic City.
   Google Scholar
• Kandhal, P. and Mallick, R., 1997. Longitudinal joint construction techniques for asphalt pavements. NCAT Report No. 97-04.
   Google Scholar
• Liu, Q., et al., 2010. Induction heating of electrically conductive porous asphalt concrete. Construction and Building Materials, 24, 1207–1213. doi: 10.1016/j.conbuildmat.2009.12.019
   Web of Science ®Google Scholar
• Partl, M.N., Hean, S., 2002. Practical aspects of interaction between mastic asphalt and waterproofing system in bridge and tunnel construction. In: S.E. Zoorob, A.C. Collop, and S.F. Brown, eds. Performance of bituminous and hydraulic materials in pavements. Rotterdam: Balkema Publishers, 57–63.
   Google Scholar
• Wang, D. and Oeser, M, 2016. Interface treatment of longitudinal joints for porous asphalt pavement. International Journal of Pavement Engineering, 17 (8), 741–752. doi: 10.1080/10298436.2015.1025779
   Web of Science ®Google Scholar
• Williams, S.G, 2011. Density, permeability, infiltration, and absorption used to assess quality of hot-mix asphalt longitudinal joints. Transportation Research Record: Journal of the Transportation Research Board, 2228 (1), 120–127. doi: 10.3141/2228-14
   Google Scholar
• Zhou, C., Liu, X., and Apostolidis, P., 2017. Numerical evaluation of induction heating assisted compaction technology for low temperature asphalt pavement construction. In: Transportation Research Board (TRB) 96th Annual Meeting, Washington, DC, USA.
   Google Scholar