Static creep of modified superpave asphalt concrete mixtures using crumb tire rubber, microcrystalline synthetic wax, and nano-silica

References

• AASHTO, 2002a. Specific gravity and absorption of fine aggregate. T 84/84, Washington, DC. n.d.
   Google Scholar
• AASHTO, 2002b. Standard method of test for determining the percentage of fracture in coarse aggregate. TP 61, Washington, DC. n.d.
   Google Scholar
• AASHTO, 2002c. Standard method of test for resistance to degradation of small-size coarse aggregate by abrasion and impact in the Los Angeles machine. T 96, Washington, DC. n.d.
   Google Scholar
• AASHTO, 2008. Standard method of test for plastic fines in graded aggregates and soils by use of the sand equivalent test. T 176, Washington, DC. n.d.
   Google Scholar
• AASHTO, 2011a. Standardmethodoftestforuncompactedvoidcontent of fine aggregate. T 304, Washington, DC. n.d.
   Google Scholar
• AASHTO, 2011b. Standardmethodoftestforviscositydeterminationof asphalt binder using rotational viscometer. T 316, Washington, DC. n.d.
   Google Scholar
• Al-Omari, A., et al., 2019. Effect of crumb tire rubber, microcrystalline synthetic wax, and nano silica on asphalt rheology. Road Materials and Pavement Design, 21, 1–23.
   Web of Science ®Google Scholar
• Al-Theeb, S., 2019. Static creep of modified Superpave asphalt mixtures using crumb tire rubber, microcrystalline synthetic wax, and nano-silica. M.Sc. Thesis. Jordan University of Science and Technology.
   Google Scholar
• Ali, A.H., 2013. Influence of crumb rubber modifier on performance characteristics of stone mastic asphalt. Doctoral dissertation. University of Malaya.
   Google Scholar
• Asam, K.R., 2001. Laboratory evaluation of the effect of Superpave gradations and polymer modified asphalts on pavement performance. Doctoral dissertation. Ohio University.
   Google Scholar
• ASTM, 1982. Method for softening point of bitumen in ethylene glycol (ring-and-ball). D2398, West Conshohocken, PA. n.d.
   Google Scholar
• ASTM, 2006. Standard test method for penetration of bituminous materials. D5, West Conshohocken, PA. n.d.
   Google Scholar
• ASTM, 2007. Standard test method for ductility of bituminous materials. D113, West Conshohocken, PA. n.d.
   Google Scholar
• ASTM, 2009. Standard test method for density of semi-solid bituminous materials (pycnometer method). D70, West Conshohocken, PA. n.d.
   Google Scholar
• ASTM, 2010. Standard test method for flat particles, elongated particles, or flat and elongated particles in coarse aggregate. D4791, West Conshohocken, PA. n.d.
   Google Scholar
• ASTM, 2012. Standard test method for flash and fire points by Cleveland open cup tester. D92, West Conshohocken, PA. n.d.
   Google Scholar
• Bonnaure, F., et al., 1977. A new method of predicting the stiffness of asphalt paving mixtures. Journal of the Association of Asphalt Paving Technologists, 46 (1977), 64–104.
   Google Scholar
• British Standards Institution (BSI), 1996. Method for assessment of resistance to permanent deformation of bitumen aggregate mixtures Subject to Unconfined Uniaxial Loading. Draft for Development DD 185, London.
   Google Scholar
• Canestrari, F., et al., 2013. Rheological properties of bituminous binders with synthetic wax. International Journal of Pavement Research and Technology, 6 (1), 15–21.
   Google Scholar
• Christensen, D.W. and Bonaquist, R.F., 2004. Evaluation of indirect tensile test (IDT) procedures for low-temperature performance of hot mix asphalt. Washington DC: Transportation Research Board. NCHRP Report 530.
   Google Scholar
• Cooper, S.B, 2009. Evaluation of HMA mixtures containing Sasobit. Louisiana Transportation Research Center. Report No. 06-1TA.
   Google Scholar
• Dai, Q. and You, Z., 2007. Prediction of creep stiffness of asphalt mixture with micromechanical finite-element and discrete-element models. Journal of Engineering Mechanics, 133 (2), 163–173. doi: 10.1061/(ASCE)0733-9399(2007)133:2(163)
   Web of Science ®Google Scholar
• Ezzat, H., et al., 2016. Evaluation of asphalt binders modified with nanoclay and nanosilica. Procedia Engineering, 143, 1260–1267. doi: 10.1016/j.proeng.2016.06.119
   Google Scholar
• Ghasemi, M., et al., 2012. Modification of stone matrix asphalt with nano-SiO2. Journal of Basic and Applied Scientific Research, 2 (2), 1338–1344.
   Google Scholar
• Hasaninia, M. and Haddadi, F., 2017. The characteristics of hot mixed asphalt modified by nanosilica. Petroleum Science and Technology, 35 (4), 351–359. doi: 10.1080/10916466.2016.1258412
   Web of Science ®Google Scholar
• Heitzman, M., 1992. Design and construction of asphalt paving materials with crumb rubber modifier. Transportation Research Record, 1339.
   Google Scholar
• Iskakbayev, A., Teltayev, B., and Alexandrov, S., 2016. Determination of the creep parameters of linear viscoelastic materials. Journal of Applied Mathematics, 2016, 1–6. doi:10.1155/2016/6568347.
   Google Scholar
• Iskakbayev, A., Teltayev, B., and Rossi, C.O., 2017. Steady-state creep of asphalt concrete. Applied Sciences, 7 (2), 142. doi: 10.3390/app7020142
   Google Scholar
• Iwanski, M. and Mazurek, G., 2012. The influence of rheological properties of bitumen with synthetic wax on changing resilient modulus of elasticity of asphalt concrete. 5th Eurasphalt & Eurobitume Congress. Istanbul, 5EE-353.
   Google Scholar
• Jeong, M., 2005. Comparison of creep compliance master curve models for hot mix asphalt. Doctoral dissertation. Virginia Tech.
   Google Scholar
• Kaloush, K.E., Witczak, M.W., and Sullivan, B.W., 2003. Simple performance test for permanent deformation evaluation of asphalt mixtures. In: Sixth international RILEM symposium on performance testing and evaluation of bituminous materials. Zurich: RILEM Publications SARL, 498–505.
   Google Scholar
• Kamal, M.A., et al., 2016. Performance and comparison of crumb rubber modified and conventional mixes under varying temperature and stress levels. University of Engineering and Technology Taxila. Technical Journal, 21 (2), 10.
   Google Scholar
• Khasawneh, M., Taamneh, M., and Albatayneh, O., 2019. Evaluation of static creep of FORTA-FI strengthened asphalt mixtures using experimental, statistical and feed-forward back-propagation ANN techniques. The International Journal of Pavement Research and Technology, 12 (1), 43–53. doi: 10.1007/s42947-019-0006-3
   Google Scholar
• Kim, J., Sholar, G.A., and Kim, S., 2008. Determination of accurate creep compliance and relaxation modulus at a single temperature for viscoelastic solids. Journal of Materials in Civil Engineering, 20 (2), 147–156. doi: 10.1061/(ASCE)0899-1561(2008)20:2(147)
   Web of Science ®Google Scholar
• Kök, B.V. and Çolak, H., 2011. Laboratory comparison of the crumb-rubber and SBS modified bitumen and hot mix asphalt. Construction and Building Materials, 25 (8), 3204–3212. doi: 10.1016/j.conbuildmat.2011.03.005
   Web of Science ®Google Scholar
• Liang, M., et al., 2015. Viscous properties, storage stability and their relationships with microstructure of tire scrap rubber modified asphalt. Construction and Building Materials, 74 (2015), 124–131. doi: 10.1016/j.conbuildmat.2014.10.015
   Web of Science ®Google Scholar
• Little, D.N., Button, J.W., and Youssef, H., 1993. Development of criteria to evaluate uniaxial creep data and asphalt concrete permanent deformation potential. Transportation Research Record, (1417), 49–57.
   Google Scholar
• Lu, X. and Redelius, P., 2007. Effect of bitumen wax on asphalt mixture performance. Construction and Building Materials, 21 (11), 1961–1970. doi: 10.1016/j.conbuildmat.2006.05.048
   Web of Science ®Google Scholar
• Mahan, H.M., 2013. Behavior of permanent deformation in asphalt concrete pavements under temperature. Al-Qadisiyah Journal for Engineering Sciences, 1, 62–73.
   Google Scholar
• Mahboub, K. and Little, D.N., 1988. Improved Asphalt Concrete Mixture Design. Texas Transportation Institute, Texas A&M University System. Research Report 2474-1F.
   Google Scholar
• Merighi, J.V. and Fortes, R.M., 2004. The Study of Permanent Deformation Using the Static Creep Test. In: 3rd Eurasphalt & Eurobitume Congress, 12–14.
   Google Scholar
• Merusi, F. and Giuliani, F., 2011. Rheological characterization of wax-modified asphalt binders at high service temperatures. Materials and Structures, 44 (10), 1809–1820. doi: 10.1617/s11527-011-9739-4
   Web of Science ®Google Scholar
• Moghaddam, T.B., Soltani, M., and Karim, M.R., 2014. Experimental characterization of rutting performance of polyethylene terephthalate modified asphalt mixtures under static and dynamic loads. Construction and Building Materials, 65, 487–494. doi: 10.1016/j.conbuildmat.2014.05.006
   Web of Science ®Google Scholar
• Mohamed, A.A. and Boulbibane, M., 2013. Effect of asphalt mixture compaction on stability and Volumetric properties of ACW14.
   Google Scholar
• Mostafa, A.E., 2016. Examining the performance of hot mix asphalt using nano-materials. International Organization of Scientific Research (IOSRJEN), 6 (02), 25–34.
   Google Scholar
• Navarro, F.J., et al., 2007. Influence of processing conditions on the rheological behavior of crumb tire rubber-modified bitumen. Journal of Applied Polymer Science, 104 (3), 1683–1691. doi: 10.1002/app.25800
   Web of Science ®Google Scholar
• Onyango, M.A., 2009. Verification of mechanistic prediction models for permanent deformation in asphalt mixes using accelerated pavement testing. Doctoral dissertation. Kansas State University.
   Google Scholar
• Palit, S.K., Reddy, K.S., and Pandey, B.B., 2004. Laboratory evaluation of crumb rubber modified asphalt mixes. Journal of Materials in Civil Engineering, 16 (1), 45–53. doi: 10.1061/(ASCE)0899-1561(2004)16:1(45)
   Web of Science ®Google Scholar
• Polacco, G., et al., 2012. Structural and rheological characterization of wax modified bitumens. Fuel, 95, 407–416. doi: 10.1016/j.fuel.2011.10.006
   Web of Science ®Google Scholar
• Rezvan, B. and Hassan, Z., 2017. Evaluation of rutting performance of stone matrix asphalt mixtures containing warm mix additives. Journal of Central South University, 24 (2), 360–373. doi: 10.1007/s11771-017-3438-4
   Web of Science ®Google Scholar
• Safi, F.R., et al., 2018. A model to predict creep compliance of asphalt mixtures containing recycled materials. Construction and Building Materials, 184, 374–381. doi: 10.1016/j.conbuildmat.2018.06.232
   Web of Science ®Google Scholar
• Salifu, A., et al., 2009. Compaction sensitivity of Saskatchewan SPS-91 asphalt mixes. In: 2009 Annual Conference of the Transportation Association of Canada, Vancouver, British Columbia.
   Google Scholar
• Shafabakhsh, G.H., Sadeghnejad, M., and Sajed, Y., 2014. Case study of rutting performance of HMA modified with waste rubber powder. Case Studies in Construction Materials, 1, 69–76. doi: 10.1016/j.cscm.2014.04.005
   Google Scholar
• Shu, X., Huang, B., and Vukosavljevic, D., 2008. Laboratory evaluation of fatigue characteristics of recycled asphalt mixture. Construction and Building Materials, 22 (7), 1323–1330. doi: 10.1016/j.conbuildmat.2007.04.019
   Web of Science ®Google Scholar
• Sousa, J.B., et al., 1991. Evaluation of Laboratory Procedures for Compacting Asphalt Aggregate Mixtures. Institute of Transportation Studies, University of California.
   Google Scholar
• Tabatabaee, N., et al., 2009. Evaluation of performance grading parameters for crumb rubber modified asphalt binders and mixtures. In: Proceedings of 7th international RILEM symposium on advanced testing and characterization of bituminous materials (Vol. 1).
   Google Scholar
• Taherkhani, H, 2000. Experimental characterisation of the compressive permanent deformation behaviour in asphaltic mixtures. Doctoral dissertation, University of Nottingham.
   Google Scholar
• Tam, W.O., Solaimanian, M., and Kennedy, T.W., 2000. Development and use of static creep test to evaluate rut resistance of Superpave mixes. Report No. FHWA-TX-1250-4, Performed in Cooperation with the U.S. DOT, Federal Highway Administration (FHWA) and the Texas DOT.
   Google Scholar
• Tapkin, S., et al., 2013. Rutting prediction of asphalt mixtures modified by polypropylene fibers via repeated creep testing by utilising genetic programming. Materials Research, 16 (2), 277–292. doi: 10.1590/S1516-14392013005000012
   Web of Science ®Google Scholar
• Tayfur, S., Ozen, H., and Aksoy, A., 2007. Investigation of rutting performance of asphalt mixtures containing polymer modifiers. Construction and Building Materials, 21 (2), 328–337. doi: 10.1016/j.conbuildmat.2005.08.014
   Web of Science ®Google Scholar
• Thodesen, C., Shatanawi, K., and Amirkhanian, S., 2009. Effect of crumb rubber characteristics on crumb rubber modified (CRM) binder viscosity. Construction and Building Materials, 23 (1), 295–303. doi: 10.1016/j.conbuildmat.2007.12.007
   Web of Science ®Google Scholar
• Van de Loo, P.J., 1974. Creep testing, a simple tool to judge asphalt mix stability. In: Association of Asphalt Paving Technologists Proceeding, College Park, Md.
   Google Scholar
• Xiao, F., et al., 2009. Influences of crumb rubber size and type on reclaimed asphalt pavement (RAP) mixtures. Construction and Building Materials, 23 (2), 1028–1034. doi: 10.1016/j.conbuildmat.2008.05.002
   Web of Science ®Google Scholar
• Yao, H., et al., 2013. Rheological properties and chemical bonding of asphalt modified with nanosilica. Journal of Materials in Civil Engineering, 25 (11), 1619–1630. doi: 10.1061/(ASCE)MT.1943-5533.0000690
   Web of Science ®Google Scholar
• Yusoff, N.I.M., et al., 2014. The effects of moisture susceptibility and ageing conditions on nano-silica/polymer-modified asphalt mixtures. Construction and Building Materials, 72, 139–147. doi: 10.1016/j.conbuildmat.2014.09.014
   Web of Science ®Google Scholar
• Zawadzki, J., 1997. Adaptation of a creep test for evaluation of the permanent deformation of bituminous mixes. Mechanical Tests for bituminous materials. In: Fifth International Rilem Symposium MTBM, Lyon.
   Google Scholar
• Zhang, J., 2010. Effects of warm-mix asphalt additives on asphalt mixture characteristics and pavement performance. M.Sc. Thesis. University of Nebraska.
   Google Scholar
• Zhigang, Z. and Lin, F., 2013. Study of the creep damage properties of asphalt mixture under static load. In: ICF13. 13th International Conference on Fracture, China.
   Google Scholar