Investigation of fatigue behaviour of warm modified binders and warm-stone matrix asphalt (WSMA) mixtures through binder and mixture tests

References

• AASHTO, 2006. Standard specification for transportation materials and methods of sampling and testing. American Association of State Highway and Transportation Officials.
   Google Scholar
• AASHTO T 350, 2014. Standard method of test for multiple stress creep recovery (MSCR) test of asphalt binder using a dynamic shear rheometer (DSR). Washington, DC: American Association of State Transport and Officials.
   Google Scholar
• Arabani, M. and Mirabdolazimi, S.M., 2011. Experimental investigation of the fatigue behaviour of asphalt concrete mixtures containing waste iron powder. Materials Science and Engineering: A, 528 (10–11), 3866–3870. doi: 10.1016/j.msea.2011.01.099
   Web of Science ®Google Scholar
• ASTM D 1559, 1989. Resistance to plastic flow of bituminous mixtures using the Marshall apparatus. https://www.scribd.com/doc/81673063/ASTM-D-1559-Resistance-to-Plastic-Flow-of-Bituminous-Mixtures-Using-Marshall-Apparatus.
   Google Scholar
• Bahadori, A.M., Mansourkhaki, A., and Ameri, M., 2014. A phenomenological fatigue performance model of asphalt mixtures based on fracture energy density. Journal of Testing and Evaluation, 43 (1), 133–139.
   Web of Science ®Google Scholar
• Bower, N., et al., 2016. Evaluation of the performance of warm mix asphalt in Washington State. International Journal of Pavement Engineering, 17 (5), 423–434. doi: 10.1080/10298436.2014.993199
   Web of Science ®Google Scholar
• Brown, E.R., 1992. Experience with stone matrix asphalt in the United States (Rep. No. 93-4). Auburn, AL: National Center for Asphalt Technology, Auburn Univ.
   Google Scholar
• Brown, E.R. and Cooley, L.A., 1999. Designing stone matrix asphalt mixtures for rut-resistant pavements. In: National cooperative highway research program (report no. 425). Washington, DC: Transportation Research Board. National Research Council.
   Google Scholar
• D'Angelo, J., et al., 2007. Revision of the superpave high temperature binder specification: the multiple stress creep recovery test (with discussion). Journal of the Association of Asphalt Paving Technologists, 76.
   Google Scholar
• D'Angelo, J. and Dongré, R., 2009. Practical use of multiple stress creep and recovery test: characterization of styrene–butadiene–styrene dispersion and other additives in polymer-modified asphalt binders. Transportation Research Record, 2126 (1), 73–82. doi: 10.3141/2126-09
   Google Scholar
• Estakhri, C., Button, J., and Alvarez, A.E., 2010. Field and laboratory investigation of warm mix asphalt in Texas. Spring eld, VI: National Technical Information Service, Report Number FHWA/TX-10/0-5597-2.
   Google Scholar
• Fakhri, M., Kheiry, P.T., and Mirghasemi, A.A., 2012. Modeling of the permanent deformation characteristics of SMA mixtures using discrete element method. Road Materials and Pavement Design, 13 (1), 67–84. doi: 10.1080/14680629.2011.644080
   Web of Science ®Google Scholar
• Hintz, C., et al., 2011. Modification and validation of linear amplitude sweep test for binder fatigue specification. Transportation Research Record: Journal of the Transportation Research Board, 2207 (1), 99–106. doi: 10.3141/2207-13
   Web of Science ®Google Scholar
• Hintz, C. and Bahia, H, 2013. Simplification of linear amplitude sweep test and specification parameter. Transportation Research Record: Journal of the Transportation Research Board, 2370 (1), 10–16. doi: 10.3141/2370-02
   Web of Science ®Google Scholar
• Jamshidi, A., Hamzah, M.O., and You, Z., 2013. Performance of warm mix asphalt containing Sasobit®: state-of-the-art. Construction and Building Materials, 38, 530–553. doi: 10.1016/j.conbuildmat.2012.08.015
   Web of Science ®Google Scholar
• Johnson, C.M. and Bahia, H.U., 2010. Evaluation of an accelerated procedure for fatigue characterization of asphalt binders. Submitted for publication in Road Materials and Pavement Design.
   Google Scholar
• Jones, D., et al., 2009. Warm-mix asphalt study: rst-level analysis of phase 2 hvs and laboratory testing, and phase 1 and phase 2 Forensic assessments. Berkeley, CA: University of California Pavement Research Center, Report Number UCPRC-RR-2009-02.
   Google Scholar
• Khodary Moalla Hamed, F., 2010. Evaluation of fatigue resistance for modified asphalt concrete mixtures based on dissipated energy concept. Doctoral dissertation. Technische Universität.
   Google Scholar
• Liu, X., et al., 2008. Properties evaluation of asphalt-based composites with graphite and mine powders. Construction and Building Materials, 22 (3), 121–126. doi: 10.1016/j.conbuildmat.2006.10.004
   Web of Science ®Google Scholar
• Liu, Q., et al., 2012. Evaluation of the induction healing effect of porous asphalt concrete through four point bending fatigue test. Construction and Building Materials, 29, 403–409. doi: 10.1016/j.conbuildmat.2011.10.058
   Web of Science ®Google Scholar
• Moghaddam, T.B., Karim, M.R., and Abdelaziz, M., 2011. A review on fatigue and rutting performance of asphalt mixes. Scientific Research and Essays, 6 (4), 670–682.
   Google Scholar
• Nejad, F.M., Aflaki, E., and Mohammadi, M.A., 2010. Fatigue behavior of SMA and HMA mixtures. Construction and Building Materials, 24 (7), 1158–1165. doi: 10.1016/j.conbuildmat.2009.12.025
   Web of Science ®Google Scholar
• Nuñez, J.Y.M., Domingos, M.D.I., and Faxina, A.L., 2014. Susceptibility of low-density polyethylene and polyphosphoric acid-modified asphalt binders to rutting and fatigue cracking. Construction and Building Materials, 73, 509–514. doi: 10.1016/j.conbuildmat.2014.10.002
   Web of Science ®Google Scholar
• Rezvan, B. and Hassan, Z., 2017. Evaluation of rutting performance of stone matrix asphalt mixtures containing warm mix additives. Journal of Central South University, 24 (2), 360–373. doi: 10.1007/s11771-017-3438-4
   Web of Science ®Google Scholar
• Roque, R., et al., 2002. Implementation of SHRP indirect tension tester to mitigate cracking in asphalt pavements and overlays. No. WPI 0510755, Final Report.
   Google Scholar
• Sanchez-Alonso, E., et al., 2013. Effect of warm additives on rutting and fatigue behaviour of asphalt mixtures. Construction and Building Materials, 47, 240–244. doi: 10.1016/j.conbuildmat.2013.05.083
   Web of Science ®Google Scholar
• Silva, H., et al., 2010. Optimization of warm mix asphalts using different blends of binders and synthetic para n wax contents. Construction and Building Materials, 24, 1621–1631. doi: 10.1016/j.conbuildmat.2010.02.030
   Web of Science ®Google Scholar
• Xu, Q., Chen, H., and Prozzi, J.A., 2010. Performance of fiber reinforced asphalt concrete under environmental temperature and water effects. Construction and Building Materials, 24 (10), 2003–2010. doi: 10.1016/j.conbuildmat.2010.03.012
   Web of Science ®Google Scholar
• Zhang, W., et al., 2018. Comparison of laboratory and field asphalt aging for polymer-modified and warm-mix asphalt binders. Journal of Materials in Civil Engineering, 30 (7), 04018150. doi: 10.1061/(ASCE)MT.1943-5533.0002354
   Web of Science ®Google Scholar
• Zhou, F., et al., 2013. Evaluation of fatigue tests for characterizing asphalt binders. Journal of Materials in Civil Engineering, 25 (5), 610–617. doi: 10.1061/(ASCE)MT.1943-5533.0000625
   Web of Science ®Google Scholar
• Ziari, H., et al., 2014. Evaluation of fatigue behavior of hot mix asphalt mixtures prepared by bentonite modified bitumen. Construction and Building Materials, 68, 685–691. doi: 10.1016/j.conbuildmat.2014.06.066
   Web of Science ®Google Scholar
• Ziari, H., Babagoli, R., and Akbari, A., 2015. Investigation of fatigue and rutting performance of hot mix asphalt mixtures prepared by bentonite-modified bitumen. Road Materials and Pavement Design, 16 (1), 101–118. doi: 10.1080/14680629.2014.982156
   Web of Science ®Google Scholar
• Ziari, H., Babagoli, R., and Razi, S. E.T., 2015. The evaluation of rheofalt as a warm mix asphalt additive on the properties of asphalt binder. Petroleum Science and Technology, 33 (21–22), 1781–1786. doi: 10.1080/10916466.2015.1091841
   Web of Science ®Google Scholar