References
- Airey, G.D., 2003. Rheological properties of styrene butadiene styrene polymer modified road bitumens. Fuel, 82 (14), 1709–1719. doi: https://doi.org/10.1016/S0016-2361(03)00146-7
- Airey, G.D., 2004. Styrene butadiene styrene polymer modification of road bitumens. Journal of Materials Science, 39 (3), 951–959. doi: https://doi.org/10.1023/B:JMSC.0000012927.00747.83
- Alonso, S., et al., 2010. Rheology of asphalt and styrene-butadiene blends. Journal of Materials Science, 45 (10), 2591–2597. doi: https://doi.org/10.1007/s10853-010-4230-0
- Anderson, R.M., et al., 2011. Evaluation of the relationship between asphalt binder properties and non-load related cracking. Journal of the Association of Asphalt Paving Technologists, 80, 615–664.
- Bai, M, 2017. Investigation of low-temperature properties of recycling of aged SBS modified asphalt binder. Construction and Building Materials, 150, 766–773. doi: https://doi.org/10.1016/j.conbuildmat.2017.05.206
- Becker, M.Y., Müller, A.J., and Rodriguez, Y., 2003. Use of rheological compatibility criteria to study SBS modified asphalts. Journal of Applied Polymer Science, 90 (7), 1772–1782. doi: https://doi.org/10.1002/app.12764
- Behnood, A., and Gharehveran, M.M., 2019. Morphology, rheology, and physical properties of polymer-modified asphalt binders. European Polymer Journal, 112 (October 2018), 766–791. doi: https://doi.org/10.1016/j.eurpolymj.2018.10.049
- Cardone, F., et al., 2014. Influence of polymer modification on asphalt binder dynamic and steady flow viscosities. Construction and Building Materials, 71, 435–443. doi: https://doi.org/10.1016/j.conbuildmat.2014.08.043
- Cascione, A.A., et al., 2013. Investigation of asphalt modified with biopolymers derived from soybean oil. In: The 5th European Asphalt Technology Association Conference, Braunschweig, Germany.
- Chen, C., et al., 2017. Preliminary investigation of bioadvantaged polymers as sustainable alternatives to petroleum-derived polymers for asphalt modification. Materials and Structures, 50 (5), 225. doi: https://doi.org/10.1617/s11527-017-1097-4
- Chen, C., et al., 2018a. Laboratory investigation of using acrylated epoxidized soybean oil (AESO) for asphalt modification. Construction and Building Materials, 187, 267–279. doi: https://doi.org/10.1016/j.conbuildmat.2018.07.204
- Chen, C., et al., 2018b. Rheological properties and effects of aging on acrylated epoxidised soybean oil monomer-modified asphalt binder. Road Materials and Pavement Design.
- Das, A.K. and Panda, M, 2017. Investigation on rheological performance of sulphur modified bitumen (SMB) binders. Construction and Building Materials, 149, 724–732. doi: https://doi.org/10.1016/j.conbuildmat.2017.05.198
- Dong, F., et al., 2016. Rheological behaviors and microstructure of SBS / CR composite modified hard asphalt. Construction & Building Materials, 115, 285–293. doi: https://doi.org/10.1016/j.conbuildmat.2016.04.057
- Dong, F., et al., 2017. Investigation on compatibility and microstructure of PCBs-modified asphalt. Journal of Applied Polymer Science, 134 (25), 1–8. doi: https://doi.org/10.1002/app.44798
- Elkashef, M. and Williams, R.C., 2017. Improving fatigue and low temperature performance of 100% RAP mixtures using a soybean-derived rejuvenator. Construction and Building Materials, 151, 345–352. doi: https://doi.org/10.1016/j.conbuildmat.2017.06.099
- Elkashef, M., et al., 2017. Preliminary examination of soybean oil derived material as a potential rejuvenator through Superpave criteria and asphalt bitumen rheology. Construction and Building Materials, 149 (June), 826–836. doi: https://doi.org/10.1016/j.conbuildmat.2017.05.195
- Elkashef, M., Williams, R.C., and Cochran, E., 2018. Investigation of fatigue and thermal cracking behavior of rejuvenated reclaimed asphalt pavement binders and mixtures. International Journal of Fatigue, 108 (June 2017), 90–95. doi: https://doi.org/10.1016/j.ijfatigue.2017.11.013
- Fu, Z., et al., 2017. Sciencedirect Laboratory evaluation of pavement performance using modified asphalt mixture with a new composite reinforcing material. International Journal of Pavement Research and Technology, 10 (6), 507–516. doi: https://doi.org/10.1016/j.ijprt.2017.04.001
- Kim, H. and Lee, S.-J., 2013. Laboratory investigation of different standards of phase separation in crumb rubber modified asphalt binders. Journal of Materials in Civil Engineering, 25 (12), 1975–1978. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0000751
- Leng, Z., et al., 2018. Improvement of storage stability of SBS-modified asphalt with nanoclay using a new mixing method. Road Materials and Pavement Design, 20 (7), 1601–1614. doi: https://doi.org/10.1080/14680629.2018.1465842
- Liang, M., et al., 2016. Effects of SBS configuration on performance of high modulus bitumen based on dynamic mechanical analysis. Kemija u industriji, 65 (7–8), 379–384. doi: https://doi.org/10.15255/KUI.2016.019
- Lu, X., Soenen, H., and Redelius, P., 2011. Rheological characterization of polymer modified bitumens. Ann Trans Nordic Rheol Soc, 19, 77–84.
- Martínez-Estrada, A., et al., 2010. Comparative study of the effect of sulfur on the morphology and rheological properties of SB- and SBS-modified asphalt. Journal of Applied Polymer Science, 115 (6), 3409–3422. doi: https://doi.org/10.1002/app.31407
- Mohan, S.A., Woldekidan, M.F., and Qiu, J., 2013. Effects of mixing procedures on the properties of polymer modified bitumen. In Proceedings of the International Conferences on the Bearing Capacity of Roads, Railways and Airfields, 687–698.
- Nesarikar, A.R., 1995. Rheology of polymer blend liquid-liquid phase separation. Macromolecules, 28 (21), 7202–7207. doi: https://doi.org/10.1021/ma00125a024
- Pamplona, T.F., et al., 2012. Asphalt binders modified by SBS and SBS/nanoclays: effect on rheological properties. Journal of the Brazilian Chemical Society, 23 (4), 639–647.
- Podolsky, J.H., et al., 2016. The rutting and stripping resistance of warm and hot mix asphalt using bio-additives. Construction and Building Materials, 112, 128–139. doi: https://doi.org/10.1016/j.conbuildmat.2016.02.166
- Qian, C., et al., 2018. Rheological properties, storage stability and morphology of CR / SBS composite modified asphalt by high-cured method. Construction and Building Materials, 193, 312–322. doi: https://doi.org/10.1016/j.conbuildmat.2018.10.158
- Saboo, N., and Kumar, P., 2015. Optimum blending requirements for EVA modified binder. International Journal of Pavement Research and Technology, 8 (3), 172–178.
- Saboo, N., and Kumar, P., 2016. Performance characterization of polymer modified asphalt binders and mixes. Advances in Civil Engineering, 2016, 1–12. doi: https://doi.org/10.1155/2016/5938270
- Sengoz, B., and Isikyakar, G., 2008. Evaluation of the properties and microstructure of SBS and EVA polymer modified bitumen. Construction and Building Materials, 22 (9), 1897–1905. doi: https://doi.org/10.1016/j.conbuildmat.2007.07.013
- Shafii, M.A., et al., 2017. Effect of blending temperature and blending time on physical properties of NRL-modified bitumen. International Journal of Applied Engineering Research, 12 (13), 3844–3849.
- Wen, G., et al., 2001. Vulcanization characteristics of asphalt/SBS blends in the presence of sulfur. Journal of Applied Polymer Science, 82 (4), 989–996. doi: https://doi.org/10.1002/app.1932
- Wen, G., et al., 2002. Improved properties of SBS-modified asphalt with dynamic vulcanization. Polymer Engineering and Science, 42 (5), 1070–1081. doi: https://doi.org/10.1002/pen.11013
- Williams, M.L., Landel, R.F., and Ferry, J.D., 1955. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids. Journal of the American Chemical Society, 77 (14), 3701–3707. doi: https://doi.org/10.1021/ja01619a008
- Williams, R.C., et al., 2014. Development of bio-based polymers for use in asphalt. Final report; IHRB project TR-639.
- Xu, G., Wang, H., and Zhu, H., 2017. Rheological properties and anti-aging performance of asphalt binder modified with wood lignin. Construction and Building Materials, 151, 801–808. doi: https://doi.org/10.1016/j.conbuildmat.2017.06.151
- Youtcheff, J., Wijayatilleke, N., and Shenoy, A., 2005. Evaluation of the laboratory asphalt stability test (No. FHWA-HRT-04-111). McLean, VA.
- Zhang, R., et al., 2018. Thermal storage stability of bio-oil modified asphalt. Journal of Materials in Civil Engineering, 30 (4), 04018054. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0002237
- Zhang, R., et al., 2019. The impact of bio-oil as rejuvenator for aged asphalt binder. Construction and Building Materials, 196, 134–143. doi: https://doi.org/10.1016/j.conbuildmat.2018.10.168
- Zhang, F., and Hu, C., 2017. Preparation and properties of high viscosity modified asphalt. Polymer Composites, 38 (5), 936–946. doi: https://doi.org/10.1002/pc.23655
- Zhang, F., Yu, J., and Wu, S., 2010. Effect of ageing on rheological properties of storage-stable SBS/sulfur-modified asphalts. Journal of Hazardous Materials, 182 (1–3), 507–517. doi: https://doi.org/10.1016/j.jhazmat.2010.06.061
- Zhou, F., et al., 2013. Evaluation of fatigue tests for characterizing asphalt binders. Journal of Materials in Civil Engineering, 25 (5), 610–617. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0000625