References
- Abdulmatin, A., Tangchirapat, W., and Jaturapitakkul, C, 2017. Environmentally friendly interlocking concrete paving block containing new cementing material and recycled concrete aggregate. European Journal of Environmental and Civil Engineering, 1–18. doi:https://doi.org/10.1080/19648189.2017.1355265.
- Akinyele, J.O., Salim, R.W., and Kupolati, W.K, 2016. Production of lightweight concrete from waste tire rubber crumb. Engineering Structures and Technologies, 8 (3), 108–116. doi:https://doi.org/10.3846/2029882X.2016.1209727.
- Alves, A.V., et al., 2014. Mechanical properties of structural concrete with fine recycled ceramic aggregates. Construction and Building Materials, 64, 103–113. doi:https://doi.org/10.1016/j.conbuildmat.2014.04.037.
- Arabani, M., Tahami, S.A., and Taghipoor, M, 2016. Laboratory investigation of hot mix asphalt containing waste materials. Road Materials and Pavement Design, 18 (3), 713–729. doi:https://doi.org/10.1080/14680629.2016.1189349.
- Ashish, D.K, 2018. Feasibility of waste marble powder in concrete as partial substitution of cement and sand amalgam for sustainable growth. Journal of Building Engineering, 15, 236–242. doi:https://doi.org/10.1016/j.jobe.2017.11.024.
- Aslam, M., et al., 2016. Benefits of using blended waste coarse lightweight aggregates in structural lightweight aggregate concrete. Journal of Cleaner Production, 119, 108–117. doi:https://doi.org/10.1016/j.jclepro.2016.01.071.
- Baronio, G., and Binda, L, 1997. Study of the pozzolanicity of some bricks and clays. Construction and Building Materials, 11, 41–46. doi:https://doi.org/10.1016/s0950-0618(96)00032-3.
- Bertolini, L., and Lollini, F, 2011. Effects of weathering on colour of concrete paving blocks. European Journal of Environmental and Civil Engineering, 15 (6), 939–957. doi:https://doi.org/10.1080/19648189.2011.9695281.
- Bilek, V., et al., 2015. Concretes with ternary binders – thinking about frost resistance. Cement, Wapno, Beton, 20, 72–78.
- Borosnyói, A, 2016. Long term durability performance and mechanical properties of high performance concretes with combined use of supplementary cementing materials. Construction and Building Materials, 112, 307–324. doi:https://doi.org/10.1016/j.conbuildmat.2016.02.224.
- Chan, S.Y., and Ji, X, 1999. Comparative study of the initial surface absorption and chloride diffusion of high performance zeolite, silica fume and PFA concretes. Cement and Concrete Composites, 21, 293–300. doi:https://doi.org/10.1016/s0958-9465(99)00010-4.
- Cheng, Y., et al., 2014. Test research on effects of ceramic polishing powder on carbonation and sulphate-corrosion resistance of concrete. Construction and Building Materials, 55, 440–446. doi:https://doi.org/10.1016/j.conbuildmat.2014.01.023.
- Claisse, P.A, 2014. Surface tests to determine transport properties of concrete – I: the tests, in: Transport Properties of Concrete. Elsevier, pp. 26–42. doi:https://doi.org/10.1533/9781782423195.26.
- CSN 731322 – Determination of frost resistance of concrete, Czech Republic (2003).
- CSN EN 12350-2: Testing fresh concrete – Part 2: Slump test, Czech Republic (2009).
- CSN EN 12350-7: Testing fresh concrete – Part 7: Air content - Pressure methods, Czech Republic (2009).
- CSN EN 12390-3: Testing hardened concrete – Part 3: Compressive strength of test specimens, Czech Republic (2009).
- CSN EN 12390-5: Testing hardened concrete – Part 5: Flexural strength of test specimens, Czech Republic (2009).
- CSN EN 12390-8: Testing hardened concrete – Part 8: Depth of penetration of water under pressure, Czech Republic (2009 ).
- CSN EN 13295: Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation, Czech Republic (2004).
- CSN EN 1338: Concrete paving blocks - Requirements and test methods, Czech Republic (2004).
- Damtoft, J.S., et al., 2008. Sustainable development and climate change initiatives. Cement and Concrete Research, 38, 115–127. doi:https://doi.org/10.1016/j.cemconres.2007.09.008.
- De Brito, J., Pereira, A.S., and Correia, J.R., 2005. Mechanical behaviour of non-structural concrete made with recycled ceramic aggregates. Cement and Concrete Composites, 27, 429–433. doi:https://doi.org/10.1016/j.cemconcomp.2004.07.005.
- De Weerdt, K., et al., 2011. Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash. Cement and Concrete Research, 41, 279–291. doi:https://doi.org/10.1016/j.cemconres.2010.11.014.
- Drdácký, M., et al., 2013. The Roman mortars used in the construction of the Ponte di Augusto (Narni, Italy) – A comprehensive assessment. Construction and Building Materials, 38, 1117–1128. doi:https://doi.org/10.1016/j.conbuildmat.2012.09.044.
- Ercikdi, B., Külekci, G., and Yılmaz, T, 2015. Utilization of granulated marble wastes and waste bricks as mineral admixture in cemented paste backfill of sulphide-rich tailings. Construction and Building Materials, 93, 573–583. doi:https://doi.org/10.1016/j.conbuildmat.2015.06.042.
- Ganjian, E., Jalull, G., and Sadeghi-Pouya, H, 2015. Using waste materials and by-products to produce concrete paving blocks. Construction and Building Materials, 77, 270–275. doi:https://doi.org/10.1016/j.conbuildmat.2014.12.048.
- Gao, T., et al., 2015. Analysis on differences of carbon dioxide emission from cement production and their major determinants. Journal of Cleaner Production, 103, 160–170. doi:https://doi.org/10.1016/j.jclepro.2014.11.026.
- Gencel, O., et al., 2012. Properties of concrete paving blocks made with waste marble. Journal of Cleaner Production, 21, 62–70. doi:https://doi.org/10.1016/j.jclepro.2011.08.023.
- Gonzalez-Corominas, A., and Etxeberria, M, 2014. Properties of high performance concrete made with recycled fine ceramic and coarse mixed aggregates. Construction and Building Materials, 68, 618–626. doi:https://doi.org/10.1016/j.conbuildmat.2014.07.016.
- Kannan, D.M., et al., 2017. High performance concrete incorporating ceramic waste powder as large partial replacement of Portland cement. Construction and Building Materials, 144, 35–41. doi:https://doi.org/10.1016/j.conbuildmat.2017.03.115.
- Keppert, M., et al., 2017. Rational design of cement composites containing pozzolanic additions. Construction and Building Materials, 148, 411–418. doi:https://doi.org/10.1016/j.conbuildmat.2017.05.032.
- Kevern, J.T., and Nowasell, Q.C, 2018. Internal curing of pervious concrete using lightweight aggregates. Construction and Building Materials, 161, 229–235. doi:https://doi.org/10.1016/j.conbuildmat.2017.11.055.
- Kinuthia, J.M., and Nidzam, R.M, 2011. Towards zero industrial waste: Utilisation of brick dust waste in sustainable construction. Waste Management, 31, 1867–1878. doi:https://doi.org/10.1016/j.wasman.2011.03.020.
- Kubissa, W., Jaskulski, R., and Reiterman, P, 2017. Ecological concrete based on blast-furnace cement with incorporated coarse recycled concrete aggregate and fly ash addition. Journal of Renewable Materials, 5, 53–61. doi:https://doi.org/10.7569/jrm.2017.634103.
- Lee, C.-L., et al., 2012. Establishment of the durability indices for cement-based composite containing supplementary cementitious materials. Materials & Design, 37, 28–39. doi:https://doi.org/10.1016/j.matdes.2011.12.030.
- Naceri, A., and Hamina, M.C, 2009. Use of waste brick as a partial replacement of cement in mortar. Waste Management, 29, 2378–2384. doi:https://doi.org/10.1016/j.wasman.2009.03.026.
- Navrátilová, E., and Rovnaníková, P, 2016. Pozzolanic properties of brick powders and their effect on the properties of modified lime mortars. Construction and Building Materials, 120, 530–539. doi:https://doi.org/10.1016/j.conbuildmat.2016.05.062.
- Pacheco Torgal, F., et al., 2012. An overview on concrete carbonation in the context of eco-efficient construction: evaluation, use of SCMs and/or RAC. Construction and Building Materials, 36, 141–150. doi:https://doi.org/10.1016/j.conbuildmat.2012.04.066.
- Paris, J.M., et al., 2016. A review of waste products utilized as supplements to Portland cement in concrete. Journal of Cleaner Production, 121, 1–18. doi:https://doi.org/10.1016/j.jclepro.2016.02.013.
- Pavlík, Z., et al., 2016. DSC and TG analysis of a blended binder based on waste ceramic powder and Portland cement. International Journal of Thermophysics, 37, doi:https://doi.org/10.1007/s10765-016-2043-3.
- Polozhiy, K., Siddique, J.A., and Reiterman, P, 2015. Low cost cement floor screed. Materials Science Forum, 824, 77–80. doi:https://doi.org/10.4028/www.scientific.net/msf.824.77.
- Reiterman, P., et al., 2015. Physical and mechanical properties of composites made with aluminous cement and basalt fibers developed for high temperature application. Advances in Materials Science and Engineering, 2015, 1–10. doi:https://doi.org/10.1155/2015/703029.
- Reiterman, P., and Keppert, M, 2017. Effect of ceramic powder particle size distribution on its reactivity in lime-based binders. Materials Science Forum, 908, 40–44. doi:https://doi.org/10.4028/www.scientific.net/msf.908.40.
- Sadek, D.M., and El Nouhy, H.A, 2014. Properties of paving units incorporating crushed ceramic. HBRC Journal, 10, 198–205. doi:https://doi.org/10.1016/j.hbrcj.2013.11.006.
- Sahmaran, M., Yildirim, G., and Erdem, T.K, 2013. Self-healing capability of cementitious composites incorporating different supplementary cementitious materials. Cement and Concrete Composites, 35, 89–101. doi:https://doi.org/10.1016/j.cemconcomp.2012.08.013.
- Schackow, A., et al., 2015. Influence of fired clay brick waste additions on the durability of mortars. Cement and Concrete Composites, 62, 82–89. doi:https://doi.org/10.1016/j.cemconcomp.2015.04.019.
- Schneider, M, 2015. Process technology for efficient and sustainable cement production. Cement and Concrete Research, 78, 14–23. doi:https://doi.org/10.1016/j.cemconres.2015.05.014.
- Soriano, L., et al., 2013. Effect of pozzolans on the hydration process of Portland cement cured at low temperatures. Cement and Concrete Composites, 42, 41–48. doi:https://doi.org/10.1016/j.cemconcomp.2013.05.007.
- Subaşı, S., Öztürk, H., and Emiroğlu, M, 2017. Utilizing of waste ceramic powders as filler material in self-consolidating concrete. Construction and Building Materials, 149, 567–574. doi:https://doi.org/10.1016/j.conbuildmat.2017.05.180.
- Torkittikul, P., and Chaipanich, A, 2010. Utilization of ceramic waste as fine aggregate within Portland cement and fly ash concretes. Cement and Concrete Composites, 32, 440–449. doi:https://doi.org/10.1016/j.cemconcomp.2010.02.004.
- Turanli, L., Bektas, F., and Monteiro, P.J, 2003. Use of ground clay brick as a pozzolanic material to reduce the alkali–silica reaction. Cement and Concrete Research, 33, 1539–1542. doi:https://doi.org/10.1016/s0008-8846(03)00101-7.
- Uwasu, M., Hara, K., and Yabar, H, 2014. World cement production and environmental implications. Environmental Development, 10, 36–47. doi:https://doi.org/10.1016/j.envdev.2014.02.005.
- Wang, X., et al., 2014. Properties of self-consolidating concrete containing high-volume supplementary cementitious materials and nano-limestone. Journal of Sustainable Cement-Based Materials, 3 (3–4), 245–255. doi:https://doi.org/10.1080/21650373.2014.954155.
- Wilson, M.A., Taylor, S.C., and Hoff, W.D, 1998. The initial surface absorption test (ISAT): an analytical approach. Magazine of Concrete Research, 50, 179–185. doi:https://doi.org/10.1680/macr.1998.50.2.179.
- Zou, D., et al., 2018. Effects of pore structure and water absorption on internal curing efficiency of porous aggregates. Construction and Building Materials, 163, 949–959. doi:https://doi.org/10.1016/j.conbuildmat.2017.12.170.