References
- Ahmadinia, E., et al., 2012. Performance evaluation of utilization of waste Polyethylene Terephthalate (PET) in stone mastic asphalt. Construction and Building Materials, 36, 984–989. doi: https://doi.org/10.1016/j.conbuildmat.2012.06.015
- Al-Dubabe, I.A., et al., 1998. Polymer modification of Arab asphalt. Journal of Materials in Civil Engineering, 10 (3), 161–167. doi: https://doi.org/10.1061/(ASCE)0899-1561(1998)10:3(161)
- Behnood, A., et al., 2016. High-temperature properties of asphalt binders: comparison of multiple stress creep recovery and performance grading systems. Transportation Research Record, 2574 (1), 131–143. doi: https://doi.org/10.3141/2574-15
- Behnood, A., and Gharehveran, M.M, 2019. Morphology, rheology and physical properties of polymer-modified asphalt binders. European Polymer Journal, 112, 766–791. doi: https://doi.org/10.1016/j.eurpolymj.2018.10.049
- Behnood, A., and Olek, J, 2017a. Rheological properties of asphalt binders modified with styrene-butadiene-styrene (SBS), ground tire rubber (GTR), or polyphosphoric acid (PPA). Construction and Building Materials, 151, 464–478. doi: https://doi.org/10.1016/j.conbuildmat.2017.06.115
- Behnood, A., and Olek, J, 2017b. Stress-dependent behavior and rutting resistance of modified asphalt binders: an MSCR approach. Construction and Building Materials, 157, 635–646. doi: https://doi.org/10.1016/j.conbuildmat.2017.09.138
- Coran, A.Y. and Patel, R.P, 1997. Thermoplastic elastomers based on elastomer/thermoplastic blends dynamically vulcanized. In: AL-Malaika S, ed. Reactive modifiers for polymers. Dordrecht: Springer, 349–394.
- Cuciniello, G., et al., 2019. Microstructure and rheological response of laboratory-aged SBS-modified bitumens. Road Materials and Pavement Design, 20 (5), 1–25. doi: https://doi.org/10.1080/14680629.2019.1621771
- Cui, R., Ding, J., and Chen, Y, 2019. Magnesium acrylate induced interfacial compatibilization of EPDM/PP thermoplastic vulcanizate and shape memory behavior. Composites Part A: Applied Science and Manufacturing, 122, 27–35. doi: https://doi.org/10.1016/j.compositesa.2019.04.016
- Drobny, J.G, 2014. Thermoplastic elastomers prepared by dynamic vulcanization. In: J.G. Drobny, ed. Handbook of thermoplastic elastomers, Elsevier,Oxford, 195–207.
- Favakeh, M., Bazgir, S., and Karbasi, M, 2020. Dynamically vulcanized thermoplastic elastomer nanocomposites based on LLDPE/SBR/nanoclay/bitumen: morphology and rheological behavior. Iranian Polymer Journal, 29 (3), 219–224. doi: https://doi.org/10.1007/s13726-020-00786-9
- Fu, H., et al., 2007. Storage stability and compatibility of asphalt binder modified by SBS graft copolymer. Construction and Building Materials, 21 (7), 1528–1533. doi: https://doi.org/10.1016/j.conbuildmat.2006.03.008
- González, O., Munoz, M.E., and Santamaría, A, 2006. Bitumen/polyethylene blends: using m-LLDPEs to improve stability and viscoelastic properties. Rheologica Acta, 45 (5), 603–610. doi: https://doi.org/10.1007/s00397-005-0009-7
- Huang, Y. H, 2004. Pavement analysis and design. 2nd ed. Upper Saddle River, NJ: Prentice Hall.
- Jew, P., et al., 1986. Polyethlene-modified bitumen for paving applications. Journal of Applied Polymer Science, 31 (8), 2685–2704. doi: https://doi.org/10.1002/app.1986.070310824
- Laokijcharoen, P., and Coran, A.Y, 1998. The evolution of morphology in NR/HDPE blends. Part I. Microscopy for Unvulcanized Blends. Rubber Chemistry and Technology, 71 (5), 966–974. doi: https://doi.org/10.5254/1.3538522
- Ling, M., et al., 1997. Quantitative analysis of polymers and crumb rubber in hot-mix asphalts. Transportation Research Record, 1586 (1), 57–67. doi: https://doi.org/10.3141/1586-08
- Mandal, T., et al., 2015. Effect of cross-linking agents on the rheological properties of polymer-modified bitumen. Road Materials and Pavement Design, 16 (sup1), 349–361. doi: https://doi.org/10.1080/14680629.2015.1029683
- Moghaddam, T.B., Karim, M.R., and Syammaun, T, 2012. Dynamic properties of stone mastic asphalt mixtures containing waste plastic bottles. Construction and Building Materials, 34, 236–242. doi: https://doi.org/10.1016/j.conbuildmat.2012.02.054
- Newman, J.K., 1998. Dynamic shear rheological properties of polymer-modified asphalt binders. Journal of Elastomers & Plastics, 30 (3), 245–263. doi: https://doi.org/10.1177/009524439803000305
- Polacco, G., et al., 2005. Asphalt modification with different polyethylene-based polymers. European Polymer Journal, 41 (12), 2831–2844. doi: https://doi.org/10.1016/j.eurpolymj.2005.05.034
- Punith, V.S., and Veeraragavan, A., 2010. Evaluation of reclaimed polyethylene-modified asphalt pavements. Journal of Testing and Evaluation, 38 (5), 541–548.
- Roberts, F.L., Mohammad, L.N., and Wang, L.B, 2002. History of hot mix asphalt mixture design in the United States. Journal of Materials in Civil Engineering, 14 (4), 279–293. doi: https://doi.org/10.1061/(ASCE)0899-1561(2002)14:4(279)
- Salehfard, R., Abdi, A., and Amini, B, 2016. Effect of SBR/NC on the rheological properties of bitumen and fatigue resistance of hot mix asphalt. Journal of Materials in Civil Engineering, 29 (5), 04016282. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0001756
- Yaacob, H., et al., 2016. Rheological properties of styrene butadiene rubber modified bitumen binder. Jurnal Teknologi, 78, 7–2. doi: https://doi.org/10.11113/jt.v78.9503
- Yousefi, A.A, 2004. Rubber-polyethylene modified bitumens. Iranian Polymer Journal, 13 (2), 101–112.
- Zhang, B., et al., 2009. The effect of styrene–butadiene–rubber/montmorillonite modification on the characteristics and properties of asphalt. Construction and Building Materials, 23 (10), 3112–3117. doi: https://doi.org/10.1016/j.conbuildmat.2009.06.011
- Zhu, J., Birgisson, B., and Kringos, N, 2014. Polymer modification of bitumen: advances and challenges. European Polymer Journal, 54, 18–38. doi: https://doi.org/10.1016/j.eurpolymj.2014.02.005