Evaluation of mix design volumetrics and cracking potential of foamed Warm Mix Asphalt (WMA) containing Reclaimed Asphalt Pavement (RAP)

References

• AASHTO R 30, 2002. Standard practice for mixture conditioning of hot mix asphalt (HMA). Washington, DC: The American Association of State Highway.
   Google Scholar
• AASHTO R 35, 2013. Standard practice for superpave volumetric design for asphalt mixtures. Washington, DC: The American Association of State Highway.
   Google Scholar
• AASHTO T 166, 2010. Standard method of test for bulk specific gravity of compacted hot-mix asphalt using saturated surface-dry specimens. Washington, DC: The American Association of State Highway.
   Google Scholar
• AASHTO T 209, 2012. Theoretical maximum specific gravity (Gmm) and density of hot mix asphalt (HMA). Washington, DC: The American Association of State Highway.
   Google Scholar
• AASHTO T 315, 2018. Standard method of test for determining the rheological properties of asphalt binder using a dynamic shear rheometer (DSR). Washington, DC: The American Association of State Highway.
   Google Scholar
• AASHTO T 378, 2017. Standard method of test for determining the dynamic modulus and flow number for asphalt mixtures using the asphalt mixture performance tester (AMPT). Washington, DC: The American Association of State Highway.
   Google Scholar
• AASHTO TP 108, 2016a. Standard practice for abrasion loss of asphalt mixture specimens. Washington, DC: The American Association of State Highway.
   Google Scholar
• AASHTO TP 124, 2016b. Determining the fracture potential of asphalt mixtures using semicircular bend geometry (SCB) at intermediate temperature. Washington, DC: The American Association of State Highway.
   Google Scholar
• Abuawad, I.M., Al-Qadi, I.L., and Trepanier, J.S, 2015. Mitigation of moisture damage in asphalt concrete: testing techniques and additives/modifiers effectiveness. Construction and Building Materials, 84, 437–443.
   Web of Science ®Google Scholar
• Al-Qadi, I.L., et al., 2015. Testing protocols to ensure performance of high asphalt binder replacement mixes using rap and ras, 0197-9191.
   Google Scholar
• Alhasan, A.A., et al., 2014. Low-temperature characterization of foamed warm-mix asphalt produced by water injection. Transportation Research Record, 2445 (1), 1–11.
   Google Scholar
• Ali, A., et al., 2013. Effect of temperature reduction, foaming water content, and aggregate moisture content on performance of foamed warm mix asphalt. Construction and Building Materials, 48, 1058–1066.
   Web of Science ®Google Scholar
• Aliha, M., et al., 2018. The effect of loading rate on fracture energy of asphalt mixture at intermediate temperatures and under different loading modes. Frattura ed Integrità Strutturale, 12 (43), 113–132.
   Web of Science ®Google Scholar
• Baek, J, 2010. Modeling reflective cracking development in hot-mix asphalt overlays and quantification of control techniques. University of Illinois at Urbana-Champaign, IL, USA.
   Google Scholar
• Barman, M., et al., 2018. An alternative analysis of indirect tensile test results for evaluating fatigue characteristics of asphalt mixes. Construction and Building Materials, 166, 204–213.
   Web of Science ®Google Scholar
• Bonaquist, R.F, 2011. Mix design practices for warm mix asphalt. Transportation Research Board, Washington D.C., USA.
   Google Scholar
• Chehab, G.R., O’quinn, E., and Richard Kim, Y, 2000. Specimen geometry study for direct tension test based on mechanical tests and air void variation in asphalt concrete specimens compacted by superpave gyratory compactor. Transportation Research Record, 1723 (1), 125–132.
   Web of Science ®Google Scholar
• Colombier, G, 2004. Cracking in pavements: Nature and origin of cracks. Prevention of reflective cracking in pavements. CRC Press, 14–29.
   Google Scholar
• Copeland, A., et al., 2010. Field evaluation of high reclaimed asphalt pavement–warm-mix asphalt project in Florida: case study. Transportation Research Record, 2179 (1), 93–101.
   Google Scholar
• Dong, F., et al., 2017. Comparison of high temperature performance and microstructure for foamed wma and hma with rap binder. Construction and Building Materials, 134, 594–601.
   Web of Science ®Google Scholar
• Du, S., and Li, S, 2011. The raveling characteristic of porous asphalt mixture. Icte 2011, 1880–1885.
   Google Scholar
• Ghabchi, R, 2014. Laboratory characterization of recycled and warm mix asphalt for enhanced pavement applications.
   Google Scholar
• Ghabchi, R., et al., 2016. Comparison of laboratory performance of asphalt mixes containing different proportions of Ras and Rap. Construction and Building Materials, 124, 343–351.
   Web of Science ®Google Scholar
• Goh, S.W., and You, Z, 2011. Mechanical properties of porous asphalt pavement materials with warm mix asphalt and rap. Journal of Transportation Engineering, 138 (1), 90–97.
   Google Scholar
• Guo, N., et al., 2014. Laboratory performance of warm mix asphalt containing recycled asphalt mixtures. Construction and Building Materials, 64, 141–149.
   Web of Science ®Google Scholar
• Huang, B., et al., 2004. Fatigue crack characteristics of HMA mixtures containing raped. Proceeding 5th Int. Conf. on Cracking in Pavements, RILEM, 631–638.
   Google Scholar
• Hurley, G.C., and Prowell, B.D, 2006. Evaluation of potential processes for use in warm mix asphalt. Journal of the Association of Asphalt Paving Technologists, 75, 41–90.
   Google Scholar
• Jenkins, K.J, 2000. Mix design considerations for cold and half-warm bituminous mixes with emphasis of foamed bitumen. Stellenbosch: Stellenbosch University.
   Google Scholar
• Jones, W, 2004. Warm mix asphalt-a state-of-the-art review. Australian Asphalt Pavement Association Advisory Note, 17.
   Google Scholar
• Jones, C., 2008. Summit on increasing rap use in pavements sate’s perspectived. North Carolina Department of Transportation, presented at Morerap conference at Auburn, AL, USA.
   Google Scholar
• Jones, D., et al., 2010. Warm-mix asphalt study: laboratory test results for akzonobel redisettm wmx. University of California, Pavement Research Center, Davis, CA.
   Google Scholar
• Khan, A., 2016. Displacement rate and temperature effect on asphalt concrete cracking potential.
   Google Scholar
• Kheradmand, B., et al., 2014. An overview of the emerging warm mix asphalt technology. International Journal of Pavement Engineering, 15 (1), 79–94.
   Web of Science ®Google Scholar
• Kim, M., Mohammad, L.N., and Elseifi, M.A, 2012. Characterization of fracture properties of asphalt mixtures as measured by semicircular bend test and indirect tension test. Transportation Research Record, 2296 (1), 115–124.
   Google Scholar
• Li, X., and Marasteanu, M, 2010. The fracture process zone in asphalt mixture at low temperature. Engineering Fracture Mechanics, 77 (7), 1175–1190.
   Web of Science ®Google Scholar
• Lu, X.D., and Saleh, M, 2016. Evaluation of warm mix asphalt performance incorporating high rap content. Canadian Journal of Civil Engineering, 43 (4), 343–350.
   Web of Science ®Google Scholar
• Malladi, H., 2015. Investigation of warm mix asphalt concrete mixtures with recycled asphalt pavement material.
   Google Scholar
• Mcdaniel, R.S., et al., 2000. Recommended use of reclaimed asphalt pavement in the superpave mix design method. NCHRP Web document, 30.
   Google Scholar
• Napa, 2015. Simple durability tests on mixes from the FHWA ALF experiment. National Asphalt Pavement Association, Lanham, MD, USA.
   Google Scholar
• Ncat, 2017. Twins at birth differed as they aged, by Don Watson. National Center for Asphalt Technology, Auburn, AL, USA.
   Google Scholar
• Odot, 2013. Oklahoma department of transportation special provision for reclaimed asphalt pavement and shingles, 2013. Available from: http://www.oorg/c_manuals/specprov2009/oe_sp_2009-708-21.pdf [Accessed 30 August 2018].
   Google Scholar
• Ozer, H., et al., 2016. Development of the fracture-based flexibility index for asphalt concrete cracking potential using modified semi-circle bending test parameters. Construction and Building Materials, 115, 390–401.
   Web of Science ®Google Scholar
• Prowell, B.D., Hurley, G.C., and Crews, E, 2007. Field performance of warm-mix asphalt at national center for asphalt technology test track. Transportation Research Record, 1998 (1), 96–102.
   Google Scholar
• Roberts, F.L., et al., 1991. Hot mix asphalt materials, mixture design and construction.
   Google Scholar
• Rubio, M.C., et al., 2012. Warm mix asphalt: An overview. Journal of Cleaner Production, 24, 76–84.
   Web of Science ®Google Scholar
• Saeidi, H., and Aghayan, I, 2016. Investigating the effects of aging and loading rate on low-temperature cracking resistance of core-based asphalt samples using semi-circular bending test. Construction and Building Materials, 126, 682–690.
   Web of Science ®Google Scholar
• Shu, X., Huang, B., and Vukosavljevic, D, 2008. Laboratory evaluation of fatigue characteristics of recycled asphalt mixture. Construction and Building Materials, 22 (7), 1323–1330.
   Web of Science ®Google Scholar
• Singh, D., 2011. A laboratory investigation and modeling of dynamic modulus of asphalt mixes for pavement applications.
   Google Scholar
• Zhao, S., et al., 2012. Laboratory performance evaluation of warm-mix asphalt containing high percentages of reclaimed asphalt pavement. Transportation Research Record, 2294 (1), 98–105.
   Google Scholar
• Zhao, S., et al., 2013. Comparative evaluation of warm mix asphalt containing high percentages of reclaimed asphalt pavement. Construction and Building Materials, 44, 92–100.
   Web of Science ®Google Scholar