Investigating the performance of polymer and warm mix modified asphalt binders and mixtures

References

• AASHTO T321, 2017. Standard method of test for determining the fatigue life of compacted asphalt mixtures subjected to repeated flexural bending. Washington, DC: American Association of State Highway and Transportation Officials.
   Google Scholar
• AASHTO TP 101-14, 2014. Standard method of test for estimating damage tolerance of asphalt binders using the linear amplitude sweep. Washington, DC: American Association of State Highway and Transportation Officials.
   Google Scholar
• AASHTO TP 70, 2013. Standard method of test for multiple stress creep recovery (MSCR) test of asphalt binder using a dynamic shear rheometer (DSR). Washington, DC: American Association of State Highway and Transportation Officials.
   Google Scholar
• Adhikari, S., Shen, S., and You, Z, 2010. Evaluation of fatigue models of hot-mix asphalt through laboratory testing. Transportation Research Record: Journal of the Transportation Research Board, 2127, 36–42. doi:10.3141/2127-05.
   Google Scholar
• Airey, G. D., 1997. Rheological characteristics of polymer modified and aged bitumens. PhD Thesis, The University of Nottingham.
   Google Scholar
• Airey, G. D., Rahimzadeh, B., and Collop, A. C, 2004. Linear rheological behavior of bituminous paving materials. Journal of Materials in Civil Engineering, 16 (3), 212–220. doi:10.1061/(ASCE)0899-1561(2004)16:3(212).
   Web of Science ®Google Scholar
• Almeida-Costa, A., and Benta, A, 2016. Economic and environmental impact study of warm mix asphalt compared to hot mix asphalt. Journal of Cleaner Production, 112 (4), 2308–2317. doi:10.1016/j.jclepro.2015.10.077.
   Google Scholar
• Anderson, D., et al., 2001. Evaluation of fatigue criteria for asphalt binders. Transportation Research Record, 1766 (01), 48–56. doi:10.3141/1766-07.
   Google Scholar
• ASTM D2872–12, 2012. Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test). West Conshohocken, PA: ASTM International. https://doi.org/10.1520/D2872-12E01.
   Google Scholar
• ASTM D 6521-19, 2019. Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV). West Conshohocken, PA: ASTM International. https://doi.org/10.1520/D6521-13.
   Google Scholar
• ASTM D6927-15, 2015. Standard test method for Marshall stability and flow of asphalt mixtures. West Conshohocken, PA: ASTM International. https://doi.org/10.1520/D6927-15.
   Google Scholar
• ASTM D7405-08, 2008. Standard test method for multiple stress creep and recovery (MSCR) of asphalt binder using a dynamic shear rheometer. West Conshohocken, PA: ASTM International. https://doi.org/10.1520/D7405-08.
   Google Scholar
• Bahia, H. U., et al., 2001. Development of binder specification parameters based on characterization of damage behavior. Journal of the Association of Asphalt Paving Technologists, 70, 442–470.
   Google Scholar
• Biro, S., Gandhi, T., and Amirkhanian, S, 2009. Determination of zero shear viscosity of warm asphalt binders. Construction and Building Materials, 23 (5), 2080–2086. doi:10.1016/j.conbuildmat.2008.08.015.
   Web of Science ®Google Scholar
• Bodin, D., De La Roche, C., and Chabot, A, 2004. Prediction of bituminous mixes fatigue behavior during laboratory fatigue tests. In: Proc. 3rd eurasphalt & eurobitume congress, Vienna, pp. 1935–1945.
   Google Scholar
• Chen, X., Huang, B., and Xu, Z, 2007. Comaprison between flat Rubber wheeled loaded wheel tester and Asphalt Pavement analyzer. Road Materials and Pavement Design, 3, 595–604. doi:10.1080/14680629.2007.9690090.
   Google Scholar
• D'Angelo, J, 2009a. Current status of Superpave binder specification. Road Materials and Pavement Design, 10 (sup1), 13–24. doi:10.1080/14680629.2009.9690233.
   Web of Science ®Google Scholar
• D'Angelo, J. A, 2009b. The relationship of the MSCR test to rutting. Road Materials and Pavement Design, 10 (sup1), 61–80. doi:10.1080/14680629.2009.9690236.
   Web of Science ®Google Scholar
• D’Angelo, J., et al., 2010. Development in asphalt binder specifications. Transportation Research Circular, E-C147, 1–13. doi:10.17226/22903.
   Google Scholar
• EN 12697-22, 2008. Bituminous mixtures. test methods for Hot Mix asphalt—part 22: wheel tracking. Madrid, Spain: Asociación Española de Normalización y Certificación (AENOR).
   Google Scholar
• Evans, J. D., 1996. Straightforward statistics for the behavioral sciences. Pacific Grove, CA: Brooks/Cole Publishing.
   Google Scholar
• Fwa, T. F., Tan, S. A., and Zhu, L. Y, 2004. Rutting prediction of asphalt pavement layer using C-ɸ model. Journal of Transportation Engineering, 130 (5), 675–683. doi:10.1061/(ASCE)0733-947X(2004)130:5(675).
   Google Scholar
• Gul, W. A., and Guler, M, 2014. Rutting susceptibility of asphalt concrete with recycled concrete aggregate using revised Marshall procedure. Construction and Building Materials, 55, 341–349. doi:10.1016/j.conbuildmat.2014.01.043.
   Web of Science ®Google Scholar
• Harvey, J. T., et al., 1995. Fatigue performance of asphalt concrete mixes and its relationship to asphalt concrete pavement performance in California. Report: RTA-65W485-2, California Department of Transportation, Berkley.
   Google Scholar
• Hintz, C., et al., 2011. Modification and validation of linear amplitude sweep test for binder fatigue specification. Transportation Research Record: Journal of the Transportation Research Board, 2207, 99–106. doi:10.3141/2207-13.
   Web of Science ®Google Scholar
• Hintz, C., and Bahia, H, 2013. Simplification of linear amplitude sweep test and specification parameters. Transportation Research Record: Journal of Transportation Research Board, 2370, 10–16. doi:10.3141/2370-02.
   Web of Science ®Google Scholar
• IRC SP:53, 2010. Guidelines on Use of polymer and rubber modified bitumen in Road construction. New Delhi, India: Indian Roads Congress (IRC).
   Google Scholar
• IS: 2386, 1963. Methods of test for aggregates for concrete. Bureau of Indian Standards, Manak Bhavan, 9 Bahadur Shah Zafar Marg, New Delhi.
   Google Scholar
• IS 73, 2013. Indian Standard Paving Bitumen — Specification. Bureau of Indian Standards, Manak Bhavan, 9 Bahadur Shah Zafar Marg, New Delhi.
   Google Scholar
• Johnson, C. M., Bahia, H. U., and Coenen, A., 2009a. Comparison of bitumen fatigue testing procedures measured in shear and correlations with four-point bending mixture fatigue. 2nd Workshop on Four Point Bending, Guimaraes, Portugal.
   Google Scholar
• Johnson, C., Bahia, H., and Wen, H, 2009b. Practical application of viscoelastic continuum damage theory to asphalt binder fatigue characterization. Journal of the Association of Pavement Technologists, 78, 597–638.
   Google Scholar
• Kandhal, P. S., and Cooley, L., 2003. Accelerated laboratory rutting test: evaluation of the asphalt pavement analyzer. National Cooperative Highway Research Program, Report 508, Washington, DC.
   Google Scholar
• Kose, S., et al., 2000. Distribution of strains within binders in HMA using imaging and finite element techniques. Transp Res Rec J Transp Res Board, 1728, 21–27. doi:10.3141/1728-04.
   Google Scholar
• Kose, S, 2001. Development of a virtual test procedure for asphalt concrete. PhD Thesis, University of Wisconsin, Madison.
   Google Scholar
• Mastrofini, D., and Scarsella, M, 2000. The application of rheology to the evaluation of bitumen ageing. Fuel, 79 (9), 1005–1015. doi:10.1016/S0016-2361(99)00244-6.
   Web of Science ®Google Scholar
• Mirzababaei, P, 2016. Effect of zycotherm on moisture susceptibility of warm mix asphalt mixtures prepared with different aggregate types and gradations. Construction and Building Materials, 116, 403–412. doi:10.1016/j.conbuildmat.2016.04.143.
   Web of Science ®Google Scholar
• Molenaar, A, 2007. Prediction of fatigue cracking in asphalt pavements: Do we follow the right approach? Transportation Research Record: Journal of the Transportation Research Board, 155–162. doi:10.3141/2001-17.
   Web of Science ®Google Scholar
• Morea, F., Zerbino, R., and Agnusdei, J, 2013. Wheel tracking rutting performance estimation based on bitumen Low Shear viscosity (LSV), loading and temperature conditions. Materials and Structures, 47 (4), 683–692. doi:10.1617/s11527-013-0088-3.
   Web of Science ®Google Scholar
• MoRTH (Ministry of Road Transport and Highways), 2013. Specifications for road and bridge works. Indian Roads Congress on behalf of the Government of India, New Delhi, India.
   Google Scholar
• MS-2, 2014. Asphalt mix design methods, seventh ed. Lexington, KY, USA: Asphalt Institute.
   Google Scholar
• Nuñez, J. Y. M., Domingos, M. D. I., and Faxina, A. L, 2014. Susceptibility of low density polyethylene and polyphosphoric acid-modified asphalt binders to rutting and fatigue cracking. Construction and Building Materials, 73, 509–514. doi:10.1016/j.conbuildmat.2014.10.002.
   Web of Science ®Google Scholar
• Özen, H, 2011. Rutting evaluation of hydrated lime and SBS modified asphalt mixtures for laboratory and field compacted samples. Construction and Building Materials, 25 (2), 756–765. doi:10.1016/j.conbuildmat.2010.07.010.
   Web of Science ®Google Scholar
• Read, J., and Whiteoak, D, 2003. The shell bitumen handbook, 5th ed. London: Thomas Telford Services Ltd.
   Google Scholar
• Reddy, I. S., and Reddy, M. A, 2011. Low cost device for evaluating rutting characteristics of bituminous mixes. Indian Highways, 39 (3), 51–58.
   Google Scholar
• Reddy, I. S., Reddy, M. A., and Pandey, B. B, 2011. Development of rutting criteria for bituminous mixes using wheel tracking device. Highway Research Journal, 4 (2), 1–8.
   Google Scholar
• Rubio, M. C., et al., 2012. Warm mix asphalt: an overview. Journal of Cleaner Production, 24, 76–84. doi:10.1016/j.jclepro.2011.11.053.
   Web of Science ®Google Scholar
• Saboo, N, 2016. Strength characteristics of polymer modified asphalt binders and mixes. Ph.D. thesis, Indian Institute of Technology, Roorkee, India.
   Google Scholar
• Saboo, N., and Kumar, P, 2016. Analysis of different test methods for quantifying rutting susceptibility of asphalt binders. Journal of Materials in Civil Engineering, 04016024. doi:10.1061/(ASCE)MT.1943-5533.0001553.
   Web of Science ®Google Scholar
• Shafabakhsh, G. H., Sadeghnejad, M., and Sajed, Y, 2014. Case study of rutting performance of HMA modified with waste rubber powder. Case Studies in Construction Materials, 1, 69–76. doi:10.1016/j.cscm.2014.04.005.
   Google Scholar
• Singh, D., et al., 2020. Rheological interference of amine and silane–based antistripping agents on crumb rubber–modified binder. Journal of Materials in Civil Engineering, 32 (2), doi:10.1061/(ASCE)MT.1943-5533.0003004.
   Web of Science ®Google Scholar
• Singh, B., and Kumar, P, 2019. Effect of polymer modification on the ageing properties of asphalt binders: chemical and morphological investigation. Construction and Building Materials, 205, 633–641. doi:10.1016/j.conbuildmat.2019.02.050.
   Web of Science ®Google Scholar
• Singh, B., Saboo, N., and Kumar, P, 2016. Modelling the complex modulus strain relationship of asphalt binders. Petroleum Science and Technology, 34 (13), 1137–1144. doi:10.1080/10916466.2016.1190749.
   Web of Science ®Google Scholar
• Singh, B., Saboo, N., and Kumar, P, 2017. Effect of short-term ageing on creep and recovery response of asphalt binders. Journal of Transportation Engineering B – Pavements, 143 (4), doi:10.1061/JPEODX.0000018.
   Google Scholar
• Soenen, H., et al., 2013. The multiple stress creep-recovery test: A detailed analysis of repeatability and reproducibility. Road Materials and Pavement Design, 14 (Suppl. 1), 2–12. doi:10.1080/14680629.2013.774742.
   Web of Science ®Google Scholar
• Sousa, J., et al., 1998. Effect of aggregate gradation on fatigue life of asphalt concrete mixes. Transportation Research Record: Journal of the Transportation Research Board, 1630 (1), 62–68. doi:10.3141/1630-08.
   Google Scholar
• Suo, Z., and Wong, W. G, 2009. Analysis of fatigue crack growth behavior in asphalt concrete material in wearing course. Construction and Building Materials, 23 (1), 462–468. doi:10.1016/j.conbuildmat.2007.10.025.
   Web of Science ®Google Scholar
• Xu, T., et al., 2014. Evaluation of permanent deformation of asphalt mixtures using different laboratory performance tests. Construction and Building Materials, 53, 561–567. doi:10.1016/j.conbuildmat.2013.12.015.
   Web of Science ®Google Scholar
• Yoo, P. J., and Al-Qadi, I. L, 2010. A strain-controlled hot-mix asphalt fatigue model considering low and high cycles. International Journal of Pavement Engineering, 11 (6), 565–574. doi:10.1080/10298436.2010.488738.
   Web of Science ®Google Scholar
• Zhou, F., Mogawer, W., and Li, H, 2012. Evaluation of Fatigue tests for characterizing asphalt binders. Journal of Materials in Civil Engineering, 25 (5), 610–617. doi:10.1061/(ASCE)MT.1943-5533.0000625.
   Web of Science ®Google Scholar