Influence of initial defects on the fatigue behaviour of cement-stabilized macadam base through DEM

References

• AASHTO, 2013. Standard method of test for determining the fracture energy of asphalt mixtures using the semicircular bend geometry (SCB)(p. 14), TP105. Washington, DC: American Association of State Highway and Transportation Officials.
   Google Scholar
• Carmona, H.A., et al., 2007. Computer simulation of fatigue under diametrical compression. Phys. Rev. E, 75 (4), 7.
   Web of Science ®Google Scholar
• Chen, J., 2010. Virtual fatigue tests of asphalt mixture based on discrete element mothod. Nanjing: Southeast University.
   Google Scholar
• Chen, T., et al., 2020a. Microstructure of synthetic composite interfaces and verification of mixing order in cold-recycled asphalt emulsion mixture. Journal of Cleaner Production, 263, 1–10.
   Web of Science ®Google Scholar
• Chen, X., et al., 2020b. Meso-scale cracking behavior of cement treated base material. Construction and Building Materials, 239, 1–12.
   Web of Science ®Google Scholar
• Cundall, P.A, 1971. A computer model for simulating progressive large-scale movements in blocky rock systems. Proc.int.Symp.on Rock Fracture, 1 (ii-b), 11–18.
   Google Scholar
• Dobiszewska, M., Schindler, A.K., and Pichor, W, 2018. Mechanical properties and interfacial transition zone microstructure of concrete with waste basalt powder addition. Construction and Building Materials, 177, 222–229.
   Web of Science ®Google Scholar
• Dong, Q., et al., 2020. Mesoscale numerical simulation of fracture of cement treated base material during semi circular bending test with discrete element model. Construction and Building Materials, 261, 1–12.
   Web of Science ®Google Scholar
• Dong, Q., et al., 2021a. Recycling of steel slag aggregate in portland cement concrete: An overview. Journal of Cleaner Production, 282, 1–11.
   Web of Science ®Google Scholar
• Dong, Q., et al., 2021b. Long-term mechanical properties of in situ semi-rigid base materials. Road Materials and Pavement Design, 22 (7), 1692–1707.
   Web of Science ®Google Scholar
• Franus, W., Panek, R., and Wdowin, M., 2015. SEM investigation of microstructures in hydration products of portland cement. In: E.K. Polychroniadis, A.Y. Oral, and M. Ozer, eds. 2nd international multidisciplinary microscopy and microanalysis congress, Springer Proceedings in Physics, Oludeniz, TURKEY: Springer International Publishing Switzerland, 105–112.
   Google Scholar
• Gao, J.Q., et al., 2020. A case study on crack propagation law of cement stabilised macadam base. International Journal of Pavement Engineering, 21 (4), 516–523.
   Web of Science ®Google Scholar
• Gao, X.F., Koval, G., and Chazallon, C, 2019. A discrete element model for damage and fatigue crack growth of quasi-brittle materials. Advances in Materials Science and Engineering, 2019, 1–15.
   Web of Science ®Google Scholar
• Hu, J.Y., Ma, T., and Ma, K., 2021. DEM-CFD simulation on clogging and degradation of air voids in double-layer porous asphalt pavement under rainfall. Journal of Hydrology, 595, 1-15.
   Web of Science ®Google Scholar
• Itasca, 2018. PFC 2d/3D (particle flow code in 2/3 dimensions), version 5.0. Itasca Minneapolis, MN: ICG.
   Google Scholar
• Jia, Y., et al., 2018. Degradation reliability modeling of stabilized base course materials based on a modulus decrement process. Construction & Building Materials, 177, 303–313.
   Web of Science ®Google Scholar
• Jiang, J., et al., 2017. Effect of the contact structure characteristics on rutting performance in asphalt mixtures using 2D imaging analysis. Construction & Building Materials, 136 (Complete), 426–435.
   Google Scholar
• Jiang, J., et al., 2019. Evaluation of the healing potential of asphalt mixtures based on a modified semi-circular bending test. Construction and Building Materials, 196, 284–294.
   Web of Science ®Google Scholar
• Kim, H., and Buttlar, W.G., 2009a. Discrete fracture modeling of asphalt concrete. International Journal of Solids and Structures, 46 (13), 2593–2604.
   Web of Science ®Google Scholar
• Kim, H., and Buttlar, W.G., 2009b. Multi-scale fracture modeling of asphalt composite structures. Compos. Sci. Technol, 69 (15–16), 2716–2723.
   Web of Science ®Google Scholar
• Kim, H., Wagoner, M.P., and Buttlar, W.G, 2008. Simulation of fracture behavior in asphalt concrete using a heterogeneous cohesive zone discrete element model. Journal of Materials in Civil Engineering, 20 (8), 552–563.
   Web of Science ®Google Scholar
• Li, H., 2018. Study on fatigue performance of emulsified. asphalt cold recycled mixture based on discrete element method. Harbin: Northeast Forestry University.
   Google Scholar
• Liang, C.Y., et al., 2020. Analysis of internal structure of cement-stabilized macadam based on industrial CT scanning. Adv. Mater. Sci. Eng, 2020, 10.
   Web of Science ®Google Scholar
• Liu, G.Q., et al., 2020b. Effects of asphalt mixture structure types on force chains characteristics based on computational granular mechanics. International Journal of Pavement Engineering, 1–17. Available from: https://doi.org/10.1080/10298436.2020.1784894.
   Google Scholar
• Liu, J., Yu, B., and Wang, Q, 2020a. Application of steel slag in cement treated aggregate base course. Journal of Cleaner Production, 269, 1–13.
   Web of Science ®Google Scholar
• Lu, D.X., et al., 2019. Experimental and numerical investigations of non-standardised semi-circular bending test for asphalt concrete mixtures. International Journal of Pavement Engineering, 22(8), 960–972.
   Web of Science ®Google Scholar
• Lv, S.T., et al., 2021. Strength and fatigue performance for cement-treated aggregate base materials. International Journal of Pavement Engineering, 22 (6), 690–699.
   Web of Science ®Google Scholar
• Ma, T., et al., 2016a. Effect of air voids on the high-temperature creep behavior of asphalt mixture based on three-dimensional discrete element modeling. Materials & Design, 89, 304–313.
   Web of Science ®Google Scholar
• Ma, T., et al., 2016b. Influences by air voids on fatigue life of asphalt mixture based on discrete element method. Construction and Building Materials, 126, 785–799.
   Web of Science ®Google Scholar
• Ma, T., et al., 2017. Property characterization of asphalt binders and mixtures modified by different crumb rubbers. Journal of Materials in Civil Engineering, 29 (7), 1–10.
   Web of Science ®Google Scholar
• Nguyen, N.H., et al., 2019. A discrete element modelling approach for fatigue damage growth in cemented materials. International Journal of Plasticity, 112, 68–88.
   Web of Science ®Google Scholar
• Peng, Y., and Sun, L.J, 2017. Aggregate distribution influence on the indirect tensile test of asphalt mixtures using the discrete element method. International Journal of Pavement Engineering, 18 (8), 668–681.
   Web of Science ®Google Scholar
• Peng, Y., Wan, L., and Sun, L.J, 2019. Three-dimensional discrete element modelling of influence factors of indirect tensile strength of asphalt mixtures. International Journal of Pavement Engineering, 20 (6), 724–733.
   Web of Science ®Google Scholar
• Rodrigues, J.A., et al., 2019. Crack modeling of bituminous materials using extrinsic nonlinear viscoelastic cohesive zone (NVCZ) model. Construction and Building Materials, 204, 520–529.
   Web of Science ®Google Scholar
• Sebesta, S., 2005. Use of microcracking to reduce shrinkage cracking in cement-treated bases. Transportation Research Record,1936, 3–11.
   Google Scholar
• Shi, C.G., et al., 2021. Fatigue crack density of asphalt binders under controlled-stress rotational shear load testing. Construction and Building Materials, 272, 1–10.
   Web of Science ®Google Scholar
• Su, J., 2013. The research on the size effect of concrete behavior in compression and tension. Changsha: Hunan University.
   Google Scholar
• Uzan, J, 2005. Viscoelastic-viscoplastic model with damage for asphalt concrete. Journal of Materials in Civil Engineering, 17 (5), 528–534.
   Web of Science ®Google Scholar
• Wang, W., 2009. Study on the derect tensile strength of mortar with arc-I shaped test piece. Tianjin: Tianjin University.
   Google Scholar
• Wang, G.T., et al., 2020. Mechanical performance study of pervious concrete using steel slag aggregate through laboratory tests and numerical simulation. Journal of Cleaner Production, 262, 1–12.
   Web of Science ®Google Scholar
• Wen, H., et al., 2014. Characterization of cementitiously stabilized layers for use in pavement design and analysis.
   Google Scholar
• Wu, B., 2015. Trans-scale damage evolution modeling for brittle materials and structures containing micro-cracks. Nanjing: Southeast University.
   Google Scholar
• Xu, G.J., et al., 2021. Research on application feasibility of limestone in sublayer of double-layer permeable asphalt pavement. Construction and Building Materials, 287, 1–11.
   Web of Science ®Google Scholar
• Zhang, Z., et al., 2010. Two-dimensional simulation of concrete material fracturing by discrete element method. Journal of Hydroelectric Engineering, 29 (5), 22–27.
   Google Scholar
• Zhang, J., et al., 2017. Use of semi-circular bending (SCB) test and cohesive zone modeling to evaluate fracture resistance of stabilized soils. Transportation Research Record Journal of the Transportation Research Board, 2657, 67–77.
   Google Scholar
• Zhang, J., et al., 2018b. Characterization of crack growth rate of sulfur-extended asphalt mixtures using cyclic semicircular bending test. Journal of Materials in Civil Engineering, 30 (12), 04018311. 04018311-04018311.
   Web of Science ®Google Scholar
• Zhang, J., et al., 2020. Prediction of fatigue crack growth behavior of chemically stabilized materials using simple monotonic fracture test integrated with computational cohesive zone modeling. Composites Part B: Engineering, 200, 1–13.
   Web of Science ®Google Scholar
• Zhang, C., Curiel-Sosa, J., and Bui, T.Q, 2018a. Meso-scale progressive damage modeling and life prediction of 3D braided composites under fatigue tension loading. Composite Structures, 201, 62–71.
   Web of Science ®Google Scholar
• Zhang, J., Wei, Y., and Wang, T, 2001. Research on micro-cracking of cement stabilized macadam base. Highway, 62, 8–13.
   Google Scholar
• Zhao, X., et al., 2020. Micro-scale characterization of the heterogeneous properties of in-service cement-treated base material. Construction and Building Materials, 264, 1–10.
   Web of Science ®Google Scholar
• Zhu, X.Y., et al., 2020. Experimental study on flexural fatigue performance of rubberised concrete for pavement. International Journal of Pavement Engineering, 21 (9), 1135–1146.
   Web of Science ®Google Scholar