Mix design of asphalt plug joint based on response surface method and grey relational analysis

References

• Ding, Q.J., et al., 2015. Granulometric composition analysis of rap based on grey system theory. Journal of Building Materials, 18 (4), 619–625.
   Google Scholar
• Du, Y.F., et al., 2021. Using steel fibers to accelerate the heat conduction in asphalt mixture and its performance evaluation. Construction and Building Materials, 282, 122637.
   Web of Science ®Google Scholar
• Fardin, H.E. and dos Santos, A.G., 2021. Predicted responses of fatigue cracking and rutting on roller compacted concrete base composite pavements. Construction and Building Materials, 272, 121847.
   Web of Science ®Google Scholar
• Gallai, G., 2016. Flexible plug joint system with new material. New Trends in Bridge Engineering and Efficient Solution for Large and Medium Span Bridges, 156, 109–115.
   Google Scholar
• Guo, P., et al., 2021. Application of design-expert response surface methodology for the optimization of recycled asphalt mixture with waste engine oil. Journal of Materials in Civil Engineering, 33 (5), 04021075.
   Web of Science ®Google Scholar
• Hassani, A., Taghipoor, M., and Karimi, M.M., 2020. A state of the art of semi-flexible pavements: introduction, design, and performance. Construction and Building Materials, 253, 119196.
   Web of Science ®Google Scholar
• Kumar, J. and Soota, T., 2020. Multi-response optimization of machining parameter for Zircaloy by response surface methodology and grey relation analysis. Materials Today: Proceedings, 21, 1544–1550.
   Google Scholar
• Kumar, A., Soota, T., and Kumar, J., 2018. Optimisation of wire-cut EDM process parameter by grey-based response surface methodology. Journal of Industrial Engineering International, 14 (4), 821–829.
   Google Scholar
• Lapian, F.E.P., et al., 2021. Application of surface response methodology (RSM) for improving the marshall quotient of AC-WC mixtures containing PET plastic waste. Proceedings of the 6th International Conference on Civil, Offshore and Environmental Engineering, 132, 966–975.
   Google Scholar
• Li, H.B., et al., 2021. Influence of compound action of rubber powder and SBS on high-temperature performance of asphalt pavement surface. Journal of Materials in Civil Engineering, 33 (6), 04021126.
   Web of Science ®Google Scholar
• Liu, S., et al., 2016. Preparation, microstructure and rheological properties of asphalt sealants for bridge expansion joints. Construction and Building Materials, 105, 1–13.
   Web of Science ®Google Scholar
• Lu, P.Z., et al., 2021. Study on rheological properties of asphalt binders for seamless expansion joints of bridges. Australian Journal of Structural Engineering, 22 (1), 10–18.
   Web of Science ®Google Scholar
• Luo, Y.F., et al., 2021. Test evaluation on vibration reduction effect of compacted stone mastic asphalt mixture. Journal of Materials in Civil Engineering, 33 (5), 04021092.
   Web of Science ®Google Scholar
• Lv, S.T., et al., 2020. Performance and optimization of bio-oil/Buton rock asphalt composite modified asphalt. Construction and Building Materials, 264, 120235.
   Web of Science ®Google Scholar
• Lv, X.P., Liu, H.J., and Li, S.Q., 2021. Study on influencing factors of void fraction of asphalt mixture based on grey correlation. Asia Conference on Geological Research and Environmental Technology, 632, 052006.
   Google Scholar
• Malla, R.B., Swanson, B.J., and Shaw, M.T, 2011. Laboratory evaluation of a silicone foam sealant bonded to various header materials used in bridge expansion joints. Construction and Building Materials, 25 (11), 4132–4143.
   Web of Science ®Google Scholar
• Margaritis, A., et al., 2020. Identification of ageing state clusters of reclaimed asphalt binders using principal component analysis (PCA) and hierarchical cluster analysis (HCA) based on chemo-rheological parameters. Construction and Building Materials, 244, 118276.
   Web of Science ®Google Scholar
• Mo, L.T., et al., 2012. Experimental investigation of bituminous plug expansion joint materials containing high content of crumb rubber powder and granules. Materials & Design, 37, 137–143.
   Web of Science ®Google Scholar
• Moghaddam, T.B., Soltani, M., and Karim, M.R., 2014. Evaluation of permanent deformation characteristics of unmodified and polyethylene terephthalate modified asphalt mixtures using dynamic creep test. Materials & Design, 53, 317–324.
   Web of Science ®Google Scholar
• Mota, R.V., et al., 2021. Effect of binder rheology and aggregate gradation on the permanent deformation of asphalt mixtures. International Journal of Civil Engineering, 19 (7), 777–787.
   Web of Science ®Google Scholar
• Ng, A.K.Y., et al., 2018. Determination of the binder content of fine aggregate matrices prepared with modified binders. Journal of Materials in Civil Engineering, 30 (4), 04018045.
   Web of Science ®Google Scholar
• Omranian, S.R., et al., 2018. Determination of optimal mix from the standpoint of short term aging based on asphalt mixture fracture properties using response surface method. Construction and Building Materials, 179, 35–48.
   Web of Science ®Google Scholar
• Piuzzi, G.P., et al., 2021. The effects of porosity, asphalt content and fiberglass incorporation on the tensile strength and resilient modulus of asphalt concrete blends. Geotextiles and Geomembranes, 49 (3), 864–870.
   Web of Science ®Google Scholar
• Robinson, W.J. and Doyle, J.D, 2019. Tensile performance evaluation of joint adhesive for asphalt pavements. Construction and Building Materials, 218, 245–253.
   Web of Science ®Google Scholar
• Sedina, J., Valentin, J., and Benesova, L., 2017. Alternative modifications of bituminous binders for mastic asphalt mixtures. Building up Efficient and Sustainable Transport Infrastructure, 236, 012028.
   Google Scholar
• Singh, D. and Girimath, S, 2016. Influence of RAP sources and proportions on fracture and low temperature cracking performance of polymer modified binder. Construction and Building Materials, 120, 10–18.
   Web of Science ®Google Scholar
• Slebi-Acevedo, C.J., et al., 2019. Multi-response optimization of porous asphalt mixtures reinforced with aramid and polyolefin fibers employing the CRITIC-TOPSIS based on Taguchi methodology. Materials, 12 (22), 3789.
   PubMed Web of Science ®Google Scholar
• Standard test methods of bitumen and bituminous mixtures for highway engineering (JTG E20-2011). Research Institute of Highway Ministry of Transport, 373P, A374.
   Google Scholar
• Sun, J., et al., 2020a. The water stability research of the rubber powder-modified asphalt mixture. International Workshop on Green Energy, Environment and Sustainable Development, 601, 012040.
   Google Scholar
• Sun, J., et al., 2020b. Experimental study on high-temperature stability of rubber powder-modified Asphalt mixture. Journal of Physics: Conference Series, 1605, 012160–012166.
   Google Scholar
• Technical specifications for construction of highway asphalt pavements (JTG F40-2004). Research Institute of Highway Ministry of Transport, 196P, A194.
   Google Scholar
• Wang, X.P., et al., 2021. Grafting waste rubber powder and its application in asphalt. Construction and Building Materials, 271, 121881.
   Web of Science ®Google Scholar
• Xiao, M.M, 2016. Mixture composition design and interface properties of asphalt plug expansion joint. Journal of South China University of Technology (Natural Science Edition), 44 (8), 106–113.
   Google Scholar
• Xie, Y.J., et al., 2013. Investigation into fundamental properties of bituminous plug expansion joint filling mixtures containing rubber granules. Construction and Building Materials, 47, 984–989.
   Web of Science ®Google Scholar
• Xu, B., et al., 2016. Study on Marshall design parameters of porous asphalt mixture using limestone as coarse aggregate. Construction and Building Materials, 124, 846–854.
   Web of Science ®Google Scholar
• Xu, J., et al., 2020. High-temperature performance of asphalt mixtures: preliminary analysis for the standard technical index based on gray relational analysis method. Advances in Materials Science and Engineering, 2020, 5818036.
   Web of Science ®Google Scholar
• Zhao, P.H., et al., 2021. Short-term aging performance evaluation of asphalt based on principal component and cluster analysis. Journal of Testing and Evaluation, 49 (1), 590–602.
   Web of Science ®Google Scholar