Laboratory performance of recycled polyethylene modified epoxy asphalt binders

References

• Alghrafy, Y.M., Abd Alla, E.-S.M., and El-Badawy, S.M., 2021. Rheological properties and aging performance of sulfur extended asphalt modified with recycled polyethylene waste. Construction and Building Materials, 273, 121771.
   Web of Science ®Google Scholar
• Andjelkovic, D.D., et al., 2009. Novel rubbers from the cationic copolymerization of soybean oils and dicyclopentadiene, 2 – mechanical and damping properties. Macromolecular Materials and Engineering, 294 (8), 472–483.
   Web of Science ®Google Scholar
• Apostolidis, P., et al., 2018. Chemo-rheological study of hardening of epoxy modified bituminous binders with the finite element method. Transportation Research Record, 2672 (28), 190–199.
   Web of Science ®Google Scholar
• Attaelmanan, M., Feng, C.P., and Ai, A.-H., 2011. Laboratory evaluation of HMA with high density polyethylene as a modifier. Construction and Building Materials, 25 (5), 2764–2770.
   Web of Science ®Google Scholar
• Brown, R., 2002. Handbook of polymer testing: short-term mechanical tests. Shropshire: Rapra Technology.
   Google Scholar
• Chen, X., et al., 2012. State of the art of asphalt surfacings on long-spanned orthotropic steel decks in China. Journal of Testing and Evaluation, 40 (7), 1252–1259.
   Web of Science ®Google Scholar
• Chen, R., et al., 2018. Halogen-free flame retarded cold-mix epoxy asphalt binders: rheological, thermal and mechanical characterization. Construction and Building Materials, 186, 863–870.
   Web of Science ®Google Scholar
• Chen, L., et al., 2020. Feasibility evaluation of a long-life asphalt pavement for steel bridge deck. Advances in Civil Engineering, 2020, 5890945.
   Web of Science ®Google Scholar
• Chen, R., et al., 2021. Development of eco-friendly fire-retarded warm-mix epoxy asphalt binders using reactive polymeric flame retardants for road tunnel pavements. Construction and Building Materials, 284, 122752.
   Web of Science ®Google Scholar
• Costa, L.M.B., et al., 2019. Using waste polymers as a reliable alternative for asphalt binder modification – performance and morphological assessment. Construction and Building Materials, 198, 237–244.
   Web of Science ®Google Scholar
• Dalhat, M.A. and Al-Abdul Wahhab, H.I., 2017. Performance of recycled plastic waste modified asphalt binder in Saudi Arabia. International Journal of Pavement Engineering, 18 (4), 349–357.
   Web of Science ®Google Scholar
• Daly, W.H., Qui Chiu, Z., and Negulescu, I., 1993. Preparation and characterization of asphalt-modified polyethylene blends. Transportation Research Record, 1391, 56–64.
   Google Scholar
• Denning, J.H. and Carswell, J., 1983. Assessment of ‘Novophalt’ as a binder for rolled asphalt wearing course. Crowthorne: Transport and Road Research Laboratory, TRRL Laboratory, Report 1101.
   Google Scholar
• Ding, G., et al., 2021. Influence of epoxy soybean oil modified nano-silica on the compatibility of cold-mixed epoxy asphalt. Materials and Structures, 54 (1), 16.
   Web of Science ®Google Scholar
• Duncan, J., 2008. Principles and applications of mechanical thermal analysis. In: P. Gabbott, ed. Principles and applications of thermal analysis. Oxford: Blackwell, 119–163.
   Google Scholar
• Fang, C., et al., 2008. Modification of asphalt by packaging waste-polyethylene. Polymer Composites, 29 (5), 500–505.
   Web of Science ®Google Scholar
• Fang, C., et al., 2013. Preparation, characterization and hot storage stability of asphalt modified by waste polyethylene packaging. Journal of Materials Science & Technology, 29 (5), 434–438.
   Web of Science ®Google Scholar
• Fuentes-Audén, C., et al., 2008. Evaluation of thermal and mechanical properties of recycled polyethylene modified bitumen. Polymer Testing, 27 (8), 1005–1012.
   Web of Science ®Google Scholar
• Geethamma, V.G., et al., 2014. Vibration and sound damping in polymers. Resonance, 19 (9), 821–833.
   Google Scholar
• Geyer, R., Jambeck, J.R., and Law, K.L., 2017. Production, use, and fate of all plastics ever made. Science Advances, 3 (7), e1700782.
   PubMed Web of Science ®Google Scholar
• Gong, J., et al., 2019. Performance evaluation of warm mix asphalt additive modified epoxy asphalt rubbers. Construction and Building Materials, 204, 288–295.
   Web of Science ®Google Scholar
• Gong, J., et al., 2020. Laboratory evaluation of warm-mix epoxy SBS modified asphalt binders containing Sasobit. Journal of Building Engineering, 32, 101550.
   Web of Science ®Google Scholar
• Gong, J., et al., 2021. Performance of epoxy asphalt binder containing warm-mix asphalt additive. International Journal of Pavement Engineering, 22 (2), 223–232.
   Web of Science ®Google Scholar
• Haider, S., et al., 2020. Sustainable use of waste plastic modifiers to strengthen the adhesion properties of asphalt mixtures. Construction and Building Materials, 235, 117496.
   Web of Science ®Google Scholar
• Han, X., et al., 2022. Microstructure and dynamic mechanical properties epoxy/asphaltene composites. Journal of Thermal Analysis and Calorimetry, 147 (3), 2209–2219.
   Web of Science ®Google Scholar
• He, P., et al., 2019. Municipal solid waste (MSW) landfill: a source of microplastics? – evidence of microplastics in landfill leachate. Water Research, 159, 38–45.
   PubMed Web of Science ®Google Scholar
• Ho, S., et al., 2006. Study of recycled polyethylene materials as asphalt modifiers. Canadian Journal of Civil Engineering, 33 (8), 968–981.
   Web of Science ®Google Scholar
• Jiang, Y., et al., 2018. Microstructures, thermal and mechanical properties of epoxy asphalt binder modified by SBS containing various styrene-butadiene structures. Materials and Structures, 51 (4), 86.
   Web of Science ®Google Scholar
• Jiang, Y., et al., 2019. Laboratory investigation of epoxy asphalt binder modified by brominated SBS. Construction and Building Materials, 228, 116733.
   Web of Science ®Google Scholar
• Jiang, Y., et al., 2021. Improving toughness of epoxy asphalt binder with reactive epoxidized SBS. Materials and Structures, 54, 145.
   Web of Science ®Google Scholar
• Kakar, M.R., et al., 2021. Analysis of waste polyethylene (PE) and its by-products in asphalt binder. Construction and Building Materials, 280, 122492.
   Web of Science ®Google Scholar
• Khonakdar, H.A., et al., 2004. Dynamic mechanical properties and morphology of polyethylene/ethylene vinyl acetate copolymer blends. Advances in Polymer Technology, 23 (4), 307–315.
   Web of Science ®Google Scholar
• Li, C., et al., 2020. Impact of waste cooking oil on the viscosity, microstructure and mechanical performance of warm-mix epoxy asphalt binder. Construction and Building Materials, 251, 118994.
   Web of Science ®Google Scholar
• Liang, M., et al., 2021. Comparison of rheological properties and compatibility of asphalt modified with various polyethylene. International Journal of Pavement Engineering, 22 (1), 11–20.
   Web of Science ®Google Scholar
• Liu, Y., et al., 2017a. Laboratory investigation of the properties of epoxy asphalt rubber (EAR). Materials and Structures, 50 (5), 219.
   Web of Science ®Google Scholar
• Liu, Y., et al., 2017b. Ethylene vinyl acetate copolymer modified epoxy asphalt binders: phase separation evolution and mechanical properties. Construction and Building Materials, 137, 55–65.
   Web of Science ®Google Scholar
• Liu, Y., et al., 2018. Investigation of secondary phase separation and mechanical properties of epoxy SBS-modified asphalts. Construction and Building Materials, 165, 163–172.
   Web of Science ®Google Scholar
• Lu, X., Isacsson, U., and Ekblad, J., 1998. Low-temperature properties of styrene–butadiene–styrene polymer modified bitumens. Construction and Building Materials, 12 (8), 405–414.
   Web of Science ®Google Scholar
• Luo, S., et al., 2019. Construction technology of warm and hot mix epoxy asphalt paving for long-span steel bridge. Journal of Construction Engineering and Management, 145 (12), 04019074.
   Web of Science ®Google Scholar
• Ma, Y., et al., 2021. The utilization of waste plastics in asphalt pavements: a review. Cleaner Materials, 2, 100031.
   Google Scholar
• Mark, J.E., 1999. Polymer data handbook. New York: Oxford University Press.
   Google Scholar
• Masad, E., et al., 2020. A review of asphalt modification using plastics: a focus on polyethylene. Qatar: Texas A&M University.
   Google Scholar
• Menard, K.P. and Menard, N.R., 2020. Dynamic mechanical analysis. 3rd ed. Boca Raton, FL: CRC Press.
   Google Scholar
• Pipintakos, G., et al., 2021. Application of atomic force (AFM), environmental scanning electron (ESEM) and confocal laser scanning microscopy (CLSM) in bitumen: a review of the ageing effect. Micron, 147, 103083.
   PubMed Web of Science ®Google Scholar
• PlasticsEurope, 2021. Plastics ‒ the facts 2021: an analysis of European plastics production, demand and waste data. Brussels: PlasticsEurope.
   Google Scholar
• Polacco, G., et al., 2005. Asphalt modification with different polyethylene-based polymers. European Polymer Journal, 41 (12), 2831–2844.
   Web of Science ®Google Scholar
• Polacco, G., et al., 2015. A review of the fundamentals of polymer-modified asphalts: asphalt/polymer interactions and principles of compatibility. Advances in Colloid and Interface Science, 224, 72–112.
   PubMed Web of Science ®Google Scholar
• Prolongo, M.G., et al., 2010. Dynamic mechanical properties and morphology of poly(benzyl methacrylate)/epoxy thermoset blends. Polymer Engineering & Science, 50 (9), 1820–1830.
   Web of Science ®Google Scholar
• Saba, N, et al., 2016. A review on dynamic mechanical properties of natural fibre reinforced polymer composites. Construction and Building Materials, 106, 149–159.
   Web of Science ®Google Scholar
• Sengoz, B., Topal, A., and Isikyakar, G., 2009. Morphology and image analysis of polymer modified bitumens. Construction and Building Materials, 23 (5), 1986–1992.
   Web of Science ®Google Scholar
• Sophiea, D., et al., 1994. Interpenetrating polymer networks as energy-absorbing materials. In: D. Klempner, L.H. Sperling, and L.A. Utracki, eds. Interpenetrating polymer networks. Washington, DC: American Chemical Society, 39–75.
   Google Scholar
• Su, W., et al., 2020. Toughening epoxy asphalt binder using core-shell rubber nanoparticles. Construction and Building Materials, 258, 119716.
   Web of Science ®Google Scholar
• Su, W., et al., 2021. Microstructure and performance of epoxy asphalt binders modified by core-shell rubbers containing different core polymers. Construction and Building Materials, 304, 124689.
   Web of Science ®Google Scholar
• Sun, Y., et al., 2015. Thermal, mechanical properties, and low-temperature performance of fibrous nanoclay-reinforced epoxy asphalt composites and their concretes. Journal of Applied Polymer Science, 132 (12), 41694.
   Web of Science ®Google Scholar
• Sun, Y., et al., 2016. Organic montmorillonite reinforced epoxy mortar binders. Construction and Building Materials, 107, 378–384.
   Web of Science ®Google Scholar
• Sun, Y., et al., 2018. Thermal and mechanical properties of natural fibrous nanoclay reinforced epoxy asphalt adhesives. International Journal of Adhesion and Adhesives, 85, 308–314.
   Web of Science ®Google Scholar
• Sun, Y., et al., 2019. Viscous, damping, and mechanical properties of epoxy asphalt adhesives containing different penetration-grade asphalts. Journal of Applied Polymer Science, 136 (5), 47027.
   Web of Science ®Google Scholar
• Sun, Y., et al., 2020. Mechanical and bonding properties of pristine montmorillonite reinforced epoxy asphalt bond coats. Polymer Composites, 41 (8), 3034–3042.
   Web of Science ®Google Scholar
• Sun, Y., et al., 2022. Thermal and bonding properties of epoxy asphalt bond coats. Journal of Thermal Analysis and Calorimetry, 147 (3), 2013–2025.
   Web of Science ®Google Scholar
• Wang, L., et al., 2017. A combined static-and-dynamics mechanics analysis on the bridge deck pavement. Journal of Cleaner Production, 166, 209–220.
   Web of Science ®Google Scholar
• Wang, C., et al., 2021. Mechanical properties of tri-modal epoxy asphalt composites. International Journal of Pavement Engineering. Available from: https://doi.org/10.1080/10298436.10292021.12000985.
   Google Scholar
• Wu, S., and Montalvo, L., 2021. Repurposing waste plastics into cleaner asphalt pavement materials: a critical literature review. Journal of Cleaner Production, 280, 124355.
   Web of Science ®Google Scholar
• Xie, H., et al., 2021. Influence of thermal shock on the performance of B-staged epoxy bond coat for orthotropic steel bridge pavements. Construction and Building Materials, 294, 123598.
   Web of Science ®Google Scholar
• Xie, H., Li, C., and Wang, Q., 2022. A critical review on performance and phase separation of thermosetting epoxy asphalt binders and bond coats. Construction and Building Materials, 326, 126792.
   Web of Science ®Google Scholar
• Yin, H., et al., 2014. Thermal, damping, and mechanical properties of thermosetting epoxy-modified asphalts. Journal of Thermal Analysis and Calorimetry, 115 (2), 1073–1080.
   Web of Science ®Google Scholar
• Yin, H., et al., 2015. Performance of hot mix epoxy asphalt binder and its concrete. Materials and Structures, 48 (11), 3825–3835.
   Web of Science ®Google Scholar
• Yousefi, A.A., Ait-Kadi, A., and Roy, C., 2000. Composite asphalt binders: effect of modified RPE on asphalt. Journal of Materials in Civil Engineering, 12 (2), 113–123.
   Web of Science ®Google Scholar
• Zhang, Y., et al., 2014. Flame retardancy, thermal, and mechanical properties of mixed flame retardant modified epoxy asphalt binders. Construction and Building Materials, 68, 62–67.
   Web of Science ®Google Scholar
• Zhang, J., et al., 2021. Laboratory investigation on the microstructure and performance of SBS modified epoxy asphalt binder. Construction and Building Materials, 270, 121378.
   Web of Science ®Google Scholar
• Zhao, R., et al., 2022. Influence of oligomer content on viscosity and dynamic mechanical properties of epoxy asphalt binders. Construction and Building Materials, 338, 127524.
   Web of Science ®Google Scholar
• Zheng, T., et al., 2020. The curing kinetics and mechanical properties of epoxy resin composites reinforced by PEEK microparticles. Polymer Testing, 91, 106781.
   Web of Science ®Google Scholar