The effect of bedding thickness on interlocking block pavement performance

References

• Abate, M.K., 1993. Concrete paving blocks: an overview. Washington State Transportation Center (TRAC), Report No. WA-R 319.1.
   Google Scholar
• Abdelgalil, A., and Nor, H., 2014. The effect of joint width on structural performance of asphalt block pavements. Research Journal of Applied Sciences Engineering and Technology, 7, 1612–1617. https://doi.org/10.19026/rjaset.7.439.
   Google Scholar
• Ali, A.M., and Singhi, B., 2013. Overview on structural behaviour of concrete block pavement. International Journal of Scientific Engineering and Research, 4, 782–789.
   Google Scholar
• Azman, M., et al., 2014. Effective thickness of bedding sand layer for shell groove-underside shaped concrete blocks for pavement. Jurnal Teknologi, 70, 143–147.
   Google Scholar
• Barenberg, E.J., et al., 1979. Longitudinal joint systems in slip-formed rigid pavements. Interim report. Illinois: Illinois University, Urbana-Champaign Department of Civil Engineering. Report No.: ADA078836.
   Google Scholar
• Bowman, A.J., and Haigh, S.K., 2019. Subsurface deformation mechanisms beneath a flexible pavement using image correlation. Géotechnique, 69 (7), 627–637.
   Web of Science ®Google Scholar
• Clark, A.J., 1981. Further investigations into the load-spreading of concrete block paving. No.545.
   Google Scholar
• Croney, D., and Croney, P, 1991. The design and performance of road pavements. 2nd ed. New York: McGraw-Hill.
   Google Scholar
• Di Mascio, P., Moretti, L., and Capannolo, A., 2019. Concrete block pavements in urban and local roads: Analysis of stress-strain condition and proposal for a catalogue. Journal of Traffic and Transportation Engineering (English Edition), 6 (6), 557–566.
   Google Scholar
• Dong, Z., et al., 2022. Optimal design of prefabricated base joint for asphalt pavement based on finite element method and field deflection test. Construction and Building Materials, 345, 128301.
   Web of Science ®Google Scholar
• Eisenmann, J., and Leykauf, G., 1988. Design of concrete block pavements in FRG. Available from: http://www.sept.org/techpapers/113.pdf.
   Google Scholar
• Füssl, J., Kluger-Eigl, W., and Blab, R., 2016. Experimental identification and mechanical interpretation of the interaction behaviour between concrete paving blocks. International Journal of Pavement Engineering, 17, 478–488.
   Web of Science ®Google Scholar
• García, G., and Corte, N, 2022. Experimental study on an in situ concrete block pavement under heavy traffic loads. International Journal of Pavement Engineering, 23 (10), 3467–3480.
   Web of Science ®Google Scholar
• Huurman, M, 1997. Permanent deformation in concrete block pavements. Available from: https://repository.tudelft.nl/islandora/object/uuid:e0b5ce8c-c681-42ac-aab7-4eab166d30a3?collection = research.
   Google Scholar
• Ishai, I., Yaacobi, S., and Brown-Cohen, S., 2006. Design and construction of concrete block pavements for heavy-duty railway freight terminal. Proceedings of the 8th International Conference on Concrete Block Paving. San Francisco, CA USA.
   Google Scholar
• Jamshidi, A., et al., 2019. State-of-the-art of interlocking concrete block pavement technology in Japan as a post-modern pavement. Construction and Building Materials, 200, 713–755.
   Web of Science ®Google Scholar
• Kim, I., et al., 2023. The effect of joints on the performance of interlocking block pavement. Unpublished results (under review).
   Google Scholar
• Knapton, J., and O'Grady, M, 1983. Structural behaviour of concrete block paving. Concrete, 17, 17–18.
   Google Scholar
• Knapton, J., and Smith, D.R., 1997. Port and industrial pavement design with concrete pavers.
   Google Scholar
• Kuipers, G., 1992. The effect of concrete block lock-up on pavement performance. Proceedings of the 4th International Conference on Concrete Block Paving, Auckland, NZ.
   Google Scholar
• Lambe, T.W., and Whitman, R.V., 1991. Soil mechanics. Vol. 10. New Jersey: John Wiley and Sons.
   Google Scholar
• Lilley, A.A., and Dowson, A.J., 1988. Laying course sand for concrete block paving. 3rd International Conference on Concrete Block Paving, 457–462.
   Google Scholar
• Lin, W., et al., 2018. Evaluation of the load dissipation behavior of concrete block pavements with various block shapes and construction patterns. Journal of Materials in Civil Engineering, 30 (2), 04017291-1–04017291-9.
   Web of Science ®Google Scholar
• Lin, W., et al., 2021. Performance evaluation of bedding sand and load transfer characteristic of concrete block pavements. Applied Sciences, 11, 10111.
   Google Scholar
• Ling, T.C., et al., 2009. Laboratory performance of crumb rubber concrete block pavement. International Journal of Pavement Engineering, 10, 361–374.
   Web of Science ®Google Scholar
• Mahapatra, G., and Kalita, K., 2018. Effects of interlocking and supporting conditions on concrete block pavements. Journal of The Institution of Engineers (India): Series A, 99, 29–36.
   Google Scholar
• Mampearachchi, W., 2019. Structural behaviour of concrete block paving. In: Handbook on concrete block paving. Singapore: Springer, 9–26.
   Google Scholar
• Mavin, K.C., 1980. Interlocking block paving in Australian residential streets. Proceedings of the 1st International Conference on Concrete Block Paving, 2–5 September 1980. Newcastle-upon-Tyne, UK. Newcastle: Univ. Newcastle, Dept. of Civil Enginrg.
   Google Scholar
• Mavin, K.C., 1984. Site and laboratory testing of interlocking concrete block pavements. Proceedings of the 2nd International Conference on Concrete Block Paving, Delft, Netherlands.
   Google Scholar
• Miura, Y., Takaura, M., and Tsuda, T., 1984. Structural design of concrete block pavements by cbr method and its evaluation. Proceedings of the 2nd International Conference on Concrete Block Paving, Delft, Netherlands.
   Google Scholar
• Muller, R.M., Motta, L.M.G., and Medina, J., 2006. Evaluation of the Thickness of Joints in Transmission of Stress and Displacements in an Experimental Panel of Icbp. Proceedings of the 8th International Conference on Concrete Block Paving, San Francisco, CA, USA, 2006, 411–420.
   Google Scholar
• Murugan, R.B., Natarajan, C., and Chen, S.E, 2016. Material development for a sustainable precast concrete block pavement. Journal of Traffic and Transportation Engineering (English Edition), 3 (5), 483–491.
   Google Scholar
• Pal, A.C., and Das, S.S, 2019. Interlocking aperture concrete block: an answer to permeable pavement. Journal of The Institution of Engineers (India): Series A, 100 (3), 427–438.
   Google Scholar
• Panda, B.C., 2006. Load dispersion ability of concrete block layers. Proceedings of the 8th International Conference on Concrete Block Paving, San Francisco, USA.
   Google Scholar
• Panda, B.C., and Ghosh, A.K, 2001. Source of jointing sand for concrete block pavement. Journal of Materials in Civil Engineering, 13, 235–237.
   Web of Science ®Google Scholar
• Panda, B.C., and Ghosh, A.K, 2002a. Structural behavior of concrete block paving. I: sand in bed and joints. Journal of Transportation Engineering, 128, 123–129.
   Google Scholar
• Panda, B.C., and Ghosh, A.K, 2002b. Structural behavior of concrete block paving. II: concrete blocks. Journal of Transportation Engineering, 128, 130–135.
   Google Scholar
• Panda, B.C., and Pani, A.K, 2020. Load deflection profile of concrete block pavement. Journal of The Institution of Engineers (India): Series A, 101, 743–751.
   Google Scholar
• Qiao, Y., et al., 2015. Calculating rutting of some thin flexible pavements from repeated load triaxial test data. International Journal of Pavement Engineering, 16, 467–476.
   Web of Science ®Google Scholar
• Rada, G.R., et al., 1990. Structural design of concrete block pavements. Journal of Transportation Engineering, 116, 615–635.
   Google Scholar
• Ramos, A., et al., 2020. Mechanistic-empirical permanent deformation models: laboratory testing, modelling and ranking. Transportation Geotechnics, 23, 100326.
   Web of Science ®Google Scholar
• Rath, U, 2007. Structural behaviour of interlocking concrete block pavement. Rourkela: National Institute of Technology. B.Tech project report.
   Google Scholar
• Rollings, R.S., Rollings, M.P., and Sharp, K.G., 1992. Evaluation of thickness design concepts for block pavements. Proceedings of the 4th International Conference on Concrete Block Paving, Auckland, NZ.
   Google Scholar
• Seddon, P.A., 1980. The behaviour of interlocking conrete block paving at the Canterbury test track. Proceedings of the 10th Australian Road Research Board (ARRB) Conference, Sydney, Australia.
   Google Scholar
• Shackel, B., 1980. The design of interlocking concrete block pavements for road traffic. Proceedings of the 10th Australian Road Research Board (ARRB) Conference, Sydney, Australia.
   Google Scholar
• Shackel, B., and Lim, D.O.O., 2003. Mechanisms of paver interlock. Proceedings of the 7th International Conference on Concrete Block Paving, Sun City, Africa.
   Google Scholar
• Shackel B., O’Keeffe W., O’Keeffe L., 1993. Concrete block paving tested as articulated slabs. Proceedings of the 5th International Conference on Concrete Pavement Design and Rehabilitation, West Lafayette, USA.
   Google Scholar
• Sharp, K.G., 1981. An initial study into concrete block paving. Precast Concrete, 12 (11), 128–134.
   Google Scholar
• Silva, W., et al., 2023. Assessment of interlocking concrete block pavement with by-products and comparison with an asphalt pavement: a review. Applied Sciences, 13 (10), 5846.
   Google Scholar
• Simmons, M.J., 1979. Construction of interlocking concrete block pavements. In Australian Road Research Rep. ARR No. 90.
   Google Scholar
• Soutsos, M.N., et al., 2011. The effect of construction pattern and unit interlock on the structural behaviour of block pavements. Construction and Building Materials, 25, 3832–3840.
   Web of Science ®Google Scholar
• Sutherland, E.C., and Cashell, H.D., 1945. Structural efficiency of transverse weakened-plane joints. Available from: https://onlinepubs.trb.org/Onlinepubs/hrbresearchrpts/1945/3B-007.pdf.
   Google Scholar
• Talesnick, M., and Geller, R, 2020. Case study of premature failure of a concrete block pavement system at a shipping container logistics site. Journal of Performance of Constructed Facilities, 34, 04019093.
   Web of Science ®Google Scholar
• Tanahashi, H., 2000. Development of a new porous concrete block pavement for motorway-whisper block pavement.pdf. In JIPEA World Congree, 543–551.
   Google Scholar
• White, D., Randolph, M., and Thompson, B, 2005. An image-based deformation measurement system for the geotechnical centrifuge. International Journal of Physical Modelling in Geotechnics, 5 (3), 01–12.
   Google Scholar
• Yaginuma, H., and Kasahara, A., 2006. Load transfer efficiency in interlocking block. 8th International Conference on Concrete Block Paving, San Francisco, USA.
   Google Scholar