The effect of joint properties on interlocking block pavement performance

References

• AASHTO, 1993. Guide for design of pavement structures. Washington, DC: American Association of State Highway and Transportation Officials.
   Google Scholar
• Abate, M.K., 1993. Concrete paving blocks: an overview. Final technical paper, Washington State Transportation Center, 92.
   Google Scholar
• Abdelgalil, A. and Nor, H., 2014. The effect of joint width on structural performance of asphalt block pavements. Research Journal of Applied Sciences, Engineering and Technology, 7 (8), 1612–1617.
   Google Scholar
• Ah, N.H., Nor, H.M., and Azman, M., 2014. Effect of jointing sand sizes and width on horizontal displacement of concrete block pavement. Jurnal Teknologi, 71 (3), 83–86.
   Google Scholar
• Antony, S.J. and Jahanger, Z.K., 2019. Displacement fields in footing-sand interactions under cyclic loading. International Journal of Geotechnical and Geological Engineering, 12 (11), 692–696.
   Google Scholar
• Barenberg, E.J. and Smith, R.E., 1979. Longitudinal joint systems in slip-formed rigid pavements. Vol. 1. Literature Survey and Field Inspection. Report FAA-RD-79-4-1. FAA, U.S. Department of Transportation.
   Google Scholar
• Beaty, A.N.S., 1994. Bedding sands for concrete block pavements subject to heavy channelised loading. In Proceedings of 2nd International Workshop on Block Paving, 234–241.
   Google Scholar
• Bowman, A.J. and Haigh, S.K., 2019. Subsurface deformation mechanisms beneath a flexible pavement using image correlation. Géotechnique, 69 (7), 627–637.
   Web of Science ®Google Scholar
• Cai, H., et al., 2020. Direct shear test on coarse gap-graded fill: plate opening size and its effect on measured shear strength. Advances in Civil Engineering, 2020 (1), 5750438.
   Google Scholar
• Clark, A.J., 1981. Further investigations into the load-spreading of concrete block paving. No. 545.
   Google Scholar
• Clifford, J.M., 1984. Some aspect of the structural design of segmental block pavement in Southern Africa. Ph.D.Thesis, Univ. of Pretoria.
   Google Scholar
• Cook, I.D. and Knapton, J., 1992. Bedding course sands. British ceramic. Transactions and journal, 91 (4), 133–135.
   Google Scholar
• Di Mascio, P., Moretti, L., and Capannolo, A., 2019. Concrete block pavements in urban and local roads: Analysis of stress-strain condition and proposal for a catalogue. Journal of Traffic and Transportation Engineering (English Edition), 6 (6), 557–566.
   Google Scholar
• Füssl, J., Kluger-Eigl, W., and Blab, R., 2016. Experimental identification and mechanical interpretation of the interaction behaviour between concrete paving blocks. International Journal of Pavement Engineering, 17 (6), 478–488.
   Web of Science ®Google Scholar
• Hegde, A. and Roy, R., 2018. A comparative numerical study on soil–geosynthetic interactions using large scale direct shear test and pullout test. International Journal of Geosynthetics and Ground Engineering, 4 (1), 1–11.
   Google Scholar
• Huurman, M., 1997. Permanent deformation in concrete block pavements.
   Google Scholar
• Ioannides, A.M. and Korovesis, G.T., 1992. Analysis and design of doweled slab-on-grade pavement systems. Journal of Transportation Engineering, 118 (6), 745–768.
   Web of Science ®Google Scholar
• Ishai, I., Fix, B., and Masuri, N., 2006. Pullout tests in concrete block pavements for evaluating the resistance to aircraft jet engine thrust. In Proceedings, 8th International Conference on Concrete Block Paving, San Francisco, USA.
   Google Scholar
• Jamshidi, A., et al., 2019. State-of-the-art of interlocking concrete block pavement technology in Japan as a post-modern pavement. Construction and Building Materials, 200, 713–755.
   Web of Science ®Google Scholar
• Jayalath, C. and Gallage, C., 2021. Evaluating the tensile properties of geogrids using the particle image velocimetry technique. Journal of Materials in Civil Engineering, 33 (11), 04021328.
   Web of Science ®Google Scholar
• Khazanovich, L. and Gotlif, A., 2003. Evaluation of joint and crack load transfer final report (No. FHWA-RD-02-088).
   Google Scholar
• Kim, B.S., et al., 2012. Effect of opening on the shear behavior of granular materials in direct shear test. KSCE Journal of Civil Engineering, 16, 1132–1142.
   Web of Science ®Google Scholar
• Kim, I., Hong, S.W., and Chung, C.K., 2022. Experimental approach on evaluation of interlocking block pavement performance. In Proceedings, Conference on Physical Modelling in Geotechnics, Daejeon, South Korea, No. P00219.
   Google Scholar
• Knapton, J. and O’grady, M., 1983. Structural behavior of concrete block paving. Journal of the Concrete Society, 17, 17–18.
   Google Scholar
• Knapton, J. and Smith, D.R., 1997. Port and industrial pavement design with concrete pavers: A comprehensive guide. United Kingdom: British Ports Association.
   Google Scholar
• Korea Block Association, 2017. Guidelines for design, construction, and maintenance of pavement blocks for roads (In Korean).
   Google Scholar
• Lambe, T.W. and Whitman, R.V., 1991. Soil mechanics (Vol.10). New York: John Wiley & Sons.
   Google Scholar
• Lilley, A.A., and Dowson, A.J., 1988. Laying course sand for concrete block paving.In 3rd International Conference on Concrete Block Paving, 457–462.
   Google Scholar
• Lin, W., et al., 2016. Development of a horizontal shifting mechanistic-empirical prediction model for concrete block pavement. Construction and Building Materials, 118, 245–255.
   Web of Science ®Google Scholar
• Lin, W., et al., 2018. Evaluation of the load dissipation behavior of concrete block pavements with various block shapes and construction patterns. Journal of Materials in Civil Engineering, 30 (2), 04017291.
   Web of Science ®Google Scholar
• Ling, T.C., et al., 2009. Laboratory performance of crumb rubber concrete block pavement. International Journal of Pavement Engineering, 10 (5), 361–374.
   Web of Science ®Google Scholar
• Mahapatra, G. and Kalita, K., 2018. Effects of interlocking and supporting conditions on concrete block pavements. Journal of The Institution of Engineers (India): Series A, 99 (1), 29–36.
   Google Scholar
• Mampearachchi, W., 2019. Handbook on concrete block paving. Berlin/Heidelberg, Germany: Springer.
   Google Scholar
• McGhee, K.H., 1995. Design, construction, and maintenance of PCC pavement joints (No.211). Transportation Research Board.
   Google Scholar
• Mokaddes, A. and Binod, S., 2013. Overview on structural behaviour of concrete block pavement. International Journal of Scientific and Engineering Research, 4 (7), 782–789.
   Google Scholar
• Mudiyono, R., 2015. The effect of paver joint width on the construction of concrete block pavement on sloping road section. Internation Conference on Coastal and Delta Areas, 1 (2), 77–82.
   Google Scholar
• Muller, R.M., Motta, L.M.G., and Medina, J., 2006. Evaluation of the thickness of joints in transmission of stress and displacements in an experimental panel of ICBP. In Proceedings of the 8th International Conference on Concrete Block Paving, San Francisco, CA, USA, 411–420.
   Google Scholar
• Nguyen, T., Tan, J. Y., and Ho, N. Y., 2023. Deflection bowl parameters for falling weight deflectometer testing: data collection and threshold benchmarking. International Journal of Pavement Engineering, 24 (2). doi:10.1080/10298436.2022.2034815.
   Web of Science ®Google Scholar
• Panda, B.C., 2006. Load dispersion ability of concrete block layers. In Proceedings of the 8th International Conference on Concrete Block Paving, San Francisco, CA, USA, 433–445.
   Google Scholar
• Panda, B.C. and Ghosh, A.K., 2001. Source of jointing sand for concrete block pavement. Journal of Materials in Civil Engineering, 13, 235–237.
   Web of Science ®Google Scholar
• Panda, B.C. and Ghosh, A.K., 2002. Structural behavior of concrete block paving. I: Sand in bed and joints. Journal of Transportation Engineering, 128 (2), 123–129.
   Google Scholar
• Prashanth, V., Murali Krishna, A., and Dash, S.K., 2016. Pullout tests using modified direct shear test setup for measuring soil–geosynthetic interaction parameters. International Journal of Geosynthetics and Ground Engineering, 2 (2), 1–10.
   Google Scholar
• Qiao, Y., et al., 2015. Calculating rutting of some thin flexible pavements from repeated load triaxial test data. International Journal of Pavement Engineering, 16 (6), 467–476.
   Web of Science ®Google Scholar
• Rath, U, 2007. Structural behaviour of interlocking concrete block pavement. Rourkela: National Institute of Technology. B.Tech project report.
   Google Scholar
• Rathan, R.A.S. and Sunitha, V., 2021. Mechanical and structural performance evaluation of pervious interlocking paver blocks. Construction and Building Materials, 292, 123438.
   Web of Science ®Google Scholar
• Rathan, R.A.S. and Sunitha, V., 2022. Development of effective wearing layer elastic modulus for interlocking concrete block pavements. Construction and Building Materials, 341, 127796.
   Web of Science ®Google Scholar
• Ryntathiang, T., Mazumdar, M., and Pandey, B., 2006. Concrete block pavement for low volume roads. In 8th International Conference on Concrete Block Paving, San Francisco, CA, USA, 359-374.
   Google Scholar
• Shackel, B. and Lim, D.O.O., 2003. Mechanisms of paver interlock. In 7th international conference on concrete block paving.
   Google Scholar
• Soutsos, M.N., et al., 2011. The effect of construction pattern and unit interlock on the structural behaviour of block pavements. Construction and Building Materials, 25 (10), 3832–3840.
   Web of Science ®Google Scholar
• Sutherland, E.C. and Cashell, H.D., 1945. Structural efficiency of transverse weakened-plane joints. Highway Research Board Research Reports, 3B.
   Google Scholar
• Teller, L.W. and Cashell, H.D., 1995. Highway research board 217: Performance of dowelled joints under repetitive loading. Washington, DC: Highway Research Board, National Research Council.
   Google Scholar
• Tong, J., et al., 2022. A criterion of asphalt pavement rutting based on the thermal-visco-elastic-plastic model. International Journal of Pavement Engineering, 23 (4), 1134–1144. doi:10.1080/10298436.2020.1792470.
   Web of Science ®Google Scholar
• White, D., Randolph, M., and Thompson, B., 2005. An image-based deformation measurement system for the geotechnical centrifuge. International Journal of Physical Modelling in Geotechnics 5 (5), 01–12.
   Google Scholar
• Yaginuma, H. and Kasahara, A., 2006. Load transfer efficiency in interlocking block. In Proceedings of the 7th International Conference on Concrete Block Paving, 421–432.
   Google Scholar
• Yasuhisa, K., et al., 2006. Study on block shifting of interlocking block pavement. In Proceedings of the 7th International Conference on Concrete Block Paving, San Francisco, CA, USA, 447–456.
   Google Scholar