192
Views
26
CrossRef citations to date
0
Altmetric
Original Articles

A Model for the Static Sealing Performance of Compliant Metallic Gas Seals Including Surface Roughness and Rarefaction Effects

&
Pages 237-244 | Published online: 25 Mar 2008

REFERENCES

  • Seals and Scaling Handbook , 2nd Ed. , The Trade and Technical Press Ltd. , England , ( 1986 ).
  • Butzek , D. A. , “ Leak-Tightness of Silvercoated Metal Seals in the Temperature Range Between 20°C and 450°C ,” Kernforschungsanlage Juelich G.m.b.H., Zentralabteilung Allgemeine Technologie , NTIS Accession No. Juel-1500 , ( 1978 ) (in German).
  • Yanagisawa , T. , Sanada , M. , Koga , T. and Hirabayashi , H. , “ The Influence of Designing Factors on the Sealing Performance of C-seal ,” SAE Trans. , 100 , Section 6, pp 651 – 657 SAE Technical Paper Series, No. 910535 , ( 1991 ).
  • Yanagisawa , T. , Sanada , M. , Komiya , M. , Tanoue , H. and Hirabayashi , H. , “ A Study of Sealing Mechanism on C-shaped Seals ,” SAE Technical Paper Series, No. 910535 , pp 45 – 51 ( 1992 ).
  • Bayer , R. G. , “ Wear of a C-Ring Seal ,” Wear , 74 , pp 339 – 351 ( 1981 ).
  • Etsion , I. and Front , I. , “ A Model for Static Sealing Performance of End Face Seals ,” Trib. Trans. , 37 , 1 , pp 111 – 119 ( 1994 ).
  • Polycarpou , A. A. and Etsion , I. , “ Static Sealing Performance of Gas Mechanical Seals Including Surface Roughness and Rarefaction Effects ,” Trib. Trans. , 41 , pp 217 – 224 ( 1992 ).
  • Chang , W. R. , Etsion , I. and Bogy , D. B. , “ An Elastic-Plastic Model for the Contact of Rough Surfaces ,” ASME Jour, of Trib. , 109 , pp 257 – 263 ( 1987 ).
  • Greenwood , J. A. and Williamson , J. B. P. , “ Contact of Nominally Flat Surfaces,” in Proc. of the Roy. Soc. of London , A295 , pp 300 – 319 ( 1966 ).
  • Lo , C. C. , “ Elastic Contact of Rough Cylinders ,” Intl. Jour. of Mech. Sciences , 11 , pp 105 – 115 ( 1969 ).
  • Patir , N. and Cheng , H. S. , “ An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication ,” ASME Jour. of Lubr. Tech. , 100 , 2 , pp 12 – 17 ( 1978 ).
  • Burgdorfer , A. , “ The Influence of the Molecular Mean Free Path on the Performance of Hydrodynamic Gas Lubricated Bearings ,” Trans. ASME Jour. of Basic Eng., Series D, 81 , 1 , pp 94 – 100 ( 1959 ).
  • Hsia , Y. -T and Domoto , G. A. , “ An Experimental Investigation of Molecular Rarefaction Effects in Gas Lubricated Bearings at Ultra-Low Clearances ,” ASME Jour. of Lubr. Tech. , 105 , pp 120 – 130 ( 1983 ).
  • Mitsuya , Y. , “ Modified Reynolds Equation for Ultra-Thin Gas Lubrication Using 1.5- Order Slip-Flow Model and Considering Surface Accommodation Coefficient ,” ASME Jour, of Trib. , 115 , pp 289 – 294 ( 1993 ).
  • Mitsuya , Y. and Ota , H. , “ Stiffness and Damping of Compressible Lubricating Films Between Computer Flying Heads and Textured Media: Perturbation Analysis Using The Finite Element Method ,” ASME Jour, of Trib. , 113 , 4 , pp 819 – 827 ( 1991 ).
  • Ohkubo , T. and Mitsuya , Y. , “ An Experimental Investigation of the Moving Roughness Effect on Thin-Film Gas Lubrication for Flying Head Sliders ,” Advances in Information Storage Systems, ASME Press , 2 , pp 127 – 136 ( 1991 ).
  • Gans , R. F. , “ Lubrication Theory for Arbitrary Knudsen Number ,” ASME Jour. of Trib. , 107 , pp 431 – 433 ( 1985 ).
  • Hwang , C.-C. , Fung , R.-F. , Yang , R.-F. , Weng , C.-I. and Li , W.-L. , “ A New Modified Reynolds Equation for Ultrathin Film Gas Lubrication ,” IEEE Trans. on Magnetics , 32 , 2 , pp 344 – 347 ( 1996 ).
  • Makino , T. , Morohoshi , S. and Taniguchi , S. , “ Application of Average Flow Model to Thin Film Gas Lubrication ,” ASME Jour. of Trib. , 115 , pp 185 – 190 ( 1993 ).
  • Etsion , I. and Amit , M. , “ The Effect of Small Normal Loads on the Static Friction Coefficient for Very Smooth Surfaces ,” ASME Jour. of Trib. , 115 , pp 406 – 410 ( 1993 ).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.