REFERENCES
- Agarwal , G. L. , “ Foil Gas Bearings for Turbomachinery ,” SAE, Paper Number 901236 , ( 1990 ).
- Saville , M. , Gu , A. and Capaldi , R. , “ Liquid Hydrogen Turbopump Foil Bearing ,” AIAA-91-2108 , Washington, DC, ( 1991 ).
- Heshmat , H. and Hermel , P. , “ Compliant Foil Bearing Technology and Their Application to High Speed Turbomachinery,” in Proc. 19th Leeds-Lyon Symp. on Thin Film in Tribology -from Micro Meters to Nano Meters, Leeds, U.K. , Dowson , D. , et al., Eds., Elsevier Science Publishers B.V. , pp 559 – 575 ( 1993 ).
- Heshmat , H. , “ Role of Compliant Foil Bearings in Advancement and Development of High-Speed Turbomachinery ,” in Proc. at the Second ASME Pumping Machinery Symp., Fluid Engineering Conf., ASME Pumping Machinery , Cooper , P. , Ed., 154 , pp 359 – 377 ( 1993 ).
- Surianu , F. J. , Dayton , R. and Woessner , F. , “ Test Experience with Turbine End Foil Bearing Equipped Gas Turbine Engines ,” ASM A Paper 93-GT-73 , ( 1993 ).
- Chen , S. H. and Arora , G. K. , “ Development of a 1000F, 10,000 Start/Stop Cycles Foil Journal Bearing for a Gas Turbine Engine ,” AIAA Paper A87-23253 , ( 1987 )
- Heshmat , H. , “ Advancements in the Performance of Aerodynamic Foil Journal Bearings: High Speed and Load Capability ,” ASME Trib. Conf. , Paper No. 93-Trib-32 , ( 1993 ).
- Agarwal , G. L. , “ Foil Air Bearings Cleared to Land ,” Mechanical Engineering , pp 78 – 80 ( 1998 ).
- Heshmat , H. and Walton , J. , “ High Temperature Damper Development ,” Final Report for 09/30/90-09/30/94, Aero Propulsion and Power Directorate, WLAFB, Ohio, Report No. WL-TR-94-21 18 , ( 1994 ).
- Bhushan , B. and Rusietto , D. , “ Hydrodynamic Air Lubricated Compliant Surface Bearing for an Automotive Gas Turbine Engine-II: Materials and Coatings ,” NASA CR-135402 , ( 1978 ).
- DellaCorte , C. , “ Composition Optimization of Chromium Carbide Based Solid Lubricant Coatings for Foil Gas bearings at Temperatures to 650°C ,” NASA CR-I 79649 , ( 1987 ).
- DellaCorte , C. and Sliney , H. E. , “ Composition Optimization of Self-Lubricating Chromium Carbide Based Comparative Coatings for Use to 760C ,” ASLE Trans. , 30 , 1 , pp 77 – 83 ( 1987 ).
- Sliney , H. E. , “ Some Composite Bearing and Seal Materials for Gas Turbine Applications-A Review ,” Jour. of Eng. For Gas Turbines and Power, Trans, of ASME , 112 , pp 486 – 491 ( 1990 ).
- DellaCorte , C. , Fellenstein , J. A. and Benoy , P. A. , “ Evaluation of Advanced Solid Lubricant Coatings for Foil Air Bearings Operating at 25° and 500°C ,” NASA TM-1998-206619 , ( 1998 ).
- DellaCorte , C. , “ The Evaluation of a Modified Chrome Oxide Based High Temperature Solid Lubricant Coating for Foil Gas Bearings ,” NASA TM-1998-208660 , ( 1998 ).
- Heshmat , H. , “ Analysis of Compliant Foil Bearings with Spatially Variable Stiffness ,” AIAA-91-2102-CP , Washington, DC, ( 1991 ).
- DellaCorte , C. and Edmonds , B. J. , “ Preliminary Evaluation of PS300: A New Self-Lubricating High Temperature Composite Coating for Use to 800C ,” NASA TM-1 07056 , ( 1995 ).
- DellaCorte , D. , “ A New Foil Air Bearing Test Rig for Use to 700C and 70,000 rpm ,” NASA TM-107405 , ( 1997 ).