About the Load-Carrying Capacity of Elastohydrodynamic Lubrication Film

REFERENCES

• Czichos , H. , “ Failure Modes of Sliding Lubricated Concentrated Contacts ,” Wear , 28 , pp 95 – 101 ( 1974 ).
   Web of Science ®Google Scholar
• Lee , D. , Sanborn , D. M. and Winer , W. O. , “ Some Observations of the Relationship Between Film Thickness and Load in High Hertz Pressure Sliding Elastohydrodynamic Contacts. ” ASME Jour. of Lubr. Tech. , 95 , pp 386 – 390 ( 1973 ).
   Web of Science ®Google Scholar
• Parker , R. J. and Kannel , J. W. , NASA TND-6411 , ( 1971 ).
   Google Scholar
• Smeeth , M. and Spikes , H. A. , “ Central and Minimum Elastohydrodynamic Film Thickness at High Contact Pressure ,” ASME Jour. of Trib. , 119 , pp 291 – 296 ( 1997 ).
   Web of Science ®Google Scholar
• Coy , J. J. and Zaretsky , E. V. , “ Some Limitations in Applying Classical EHD Film Thickness Formulas to a High—Speed Bearing ,” ASME Jour. of Lubr. Tech. , 103 , p 295 , ( 1981 ).
   Google Scholar
• Dyson , A. and Wilson , A. R. , “ Film Thickness in Elastohydrodynamic Lubrication by Silicone Fluids ,” in Proc. Instn. Mech. Engrs. , 180 , Part 3K, p 119 , ( 1965–1966 ).
   Google Scholar
• Chang , L. , Jackson , A and Webster , M. N. , “ Effects of 3-D Surface Topography on the EHL Film Thickness and Film Breakdown ,” Trib. Trans. , 37 , pp 435 – 444 ( 1994 ).
   Web of Science ®Google Scholar
• Patching , M. J. , Kweh , C. C. , Evans , H. P. and Snidle , R. W. , “ Conditions for Scuffing Failure of Ground and Superfinished Steel Disks at High Sliding Speeds Using a Gas Turbine Engine Oil ,” ASME Jour. of Trib. , 117 , pp 482 – 489 ( 1995 ).
   Web of Science ®Google Scholar
• Cheng , H. S. and Sternlicht , B. , “ A Numerical Solution for the Pressure, Temperature, and Film Thickness Between Two Infinitely Long, Lubricated Rolling and Sliding Cylinders. Under Heavy Loads ,” ASME Jour. of Basic Eng. , pp 695 – 707 ( 1965 ).
   Google Scholar
• Kim , K. H. and Sadeghi , F. , “ Non-Newtonian Elastohydrodynamic Lubrication of Point Contact. ” ASME Jour. of Trib. , 113 , pp 703 – 711 ( 1991 ).
   Web of Science ®Google Scholar
• Paul , G. R. and Cameron , A. , “ The Ultimate Shear Stress of Fluids at High Pressures Measured By a Modified Impact Microviscometer ,” in Proc. Roy. Soc. Lond. , A. 365 , pp 31 – 41 ( 1979 ).
   Google Scholar
• Bair , S. and Winer , W. O. , “ The High Pressure High Shear Stress Rheology of Liquid Lubricants ,” ASME Jour. of Trib. , 114 , p 1 , ( 1992 ).
   Web of Science ®Google Scholar
• Evans , C. R. and Johnson , K. L. , “ The Rheological Properties of Elastohydrodynamic Lubricants ,” in Proc., Inst. Mech. Engrs. , 200 , pp 303 – 312 ( 1986 ).
   Web of Science ®Google Scholar
• Hoglund , E. and Jacobson , B. , “ Experimental Investigation of the Shear Strength of Lubricants Subjected to High Pressure and Temperature ,” ASME Jour. of Trib. , 108 , pp 571 – 578 ( 1986 ).
   Web of Science ®Google Scholar
• Jacobson , B. O. and Hamrock B. J. , “ Non-Newtonian Fluid Model Incorporated Into Elastohydrodynamic Lubrication of Rectangular Contacts ,” ASME Jour. of Trib. , 106 , pp 275 – 284 ( 1984 ).
   Web of Science ®Google Scholar
• Lee , R. T. and Hamrock , B. J. , “ A Circular Non-Newtonian Fluid Model: Part I — Used in Elastohydrodynamic Lubrication ,” ASME Jour. of Trib. , 112 , pp 486 – 495 ( 1990 ).
   Web of Science ®Google Scholar
• Smith , F. W. , “ Lubricant Behavior in Concentrated Contacts — Some Rheological Problems ,” ASLE Trans. , 3 , pp 18 – 25 ( 1960 ).
   Google Scholar
• Feng , R. and Ramesh , K. T. , “ The Rheology of Lubricants at High Shear Rates ,” ASME Jour. of Trib. , 115 , pp 640 – 649 ( 1993 ).
   Web of Science ®Google Scholar
• Bair , S. and Winer , W. O. , “ Shear Strength Measurements of Lubricants at High Pressure ,” ASME Jour. of Lubr. Tech. , 101 , pp 251 – 257 ( 1979 ).
   Web of Science ®Google Scholar
• Bair , S. and Winer , W. O. , “ The High Shear Stress Rheology of Liquid Lubricants at Pressures of 2 to 200 MPa ,” ASME Jour. of Trib. , 112 , pp 246 – 253 ( 1990 ).
   Web of Science ®Google Scholar
• Jacobson , B. O. , “ On the Lubrication of Heavily Loaded Spherical Surfaces Considering Surface Deformations and Solidification of the Lubricant ,” Acta Polytechinica Scandinavica , Mech. Eng. Ser. No. 54 , ( 1970 ).
   Google Scholar
• Roclands , C. J. A. , Vlutger , J. C. and Watermann H. I. , “ The Viscosity Temperature Pressure Relationship of Lubricating Oils and Its Correlation with Chemical Constitution ,” ASME Jour. of Basic Eng. , p 601 , ( 1963 ).
   Google Scholar
• Dowson , D. and Higginson , G. R. , Elastohydrodynamic Lubrication. The Fundamentals of Roller and Gear Lubrication , Pergamon Press , Oxford , ( 1966 ).
   Google Scholar
• Shizhu , W. and Yongbin , Z. , “ Elastohydrodynamics of the Lubricant with Limiting Shear Stress: Part I—Algorithm and Solutions ,” ASME Jour. of Trib. , (accepted), ( 1999 ).
   Google Scholar
• Shizhu , W. and Peiran. Y. , Elastohydrodynamic Lubrication (in Chinese) . Tsinghua University Press , Beijing , ( 1990 ).
   Google Scholar
• Johnson , K. L. and Roberts , A. D. , “ Film Thickness Variation with Load in EHL Contacts ,” Wear , 27 , pp 391 – 393 ( 1974 ).
   Web of Science ®Google Scholar
• Gentle , C. R. and Cameron , A. , Letter to Nature , 246 , pp 478 – 479 ( 1973 ).
   Web of Science ®Google Scholar
• Venner , C. H. , “ Multilevel Solution of the EHL Line and Point Contact Problems ,” PhD Thesis, Twente University, Netherland, ( 1991 ).
   Google Scholar
• Yongbin , Z. and Shizhu , W. , “ Film Thickness Limitation in Pure Rolling Line Contact EHL Due to the Lubricant Rheology. ” ASME Jour. of Trib. (accepted), ( 2000 ).
   Google Scholar
• Greenwood , J. A. and Kauzlarich , J. J. , “ Inlet Shear Heating in Elastohydrodynamic Lubrication ,” ASME Jour. of Trib. , pp 417 – 425 ( 1973 ).
   Google Scholar
• Murch , L. E. and Wilson , W. R. D. , “ A Thermal Elastohydrodynamic Inlet Zone Analysis ,” ASME Jour. of Lubr. Tech. , pp 212 – 216 ( 1975 ).
   Google Scholar
• Kannel , J. W. and Bell , J. C. , “ Interpretations of the Thickness of Lubricant Films in Rolling Contact: Part I — Examination of Measurements Obtained by X-Rays ,” ASME Jour. of Lubr. Tech. , pp 478 – 484 ( 1971 ).
   Google Scholar
• Cheng , H. S. , “ Isothermal Elastohydrodynamic Theory for the Full Range of Pressure-Viscosity Coefficient ,” ASME Jour. of Lubr. Tech. , pp 35 – 43 ( 1972 ).
   Google Scholar
• Cheng , H. S. , “ Calculations of Elastohydrodynamic Film Thickness in High Speed Rolling and Sliding Contacts ,” Mechanical Technology, Inc. Technical Report, MTI-67TR24 , ( 1967 ).
   Google Scholar
• Dowson , D. and Higginson , G. R. , Elastohydrodynamic Lubrication , Pergamon Press , Oxford , ( 1977 ).
   Google Scholar
• Johnson , K. L. and Tevvarwerk , J. L. , “ Shear Behavior of Elastohydrodynamic Oil Films ,” in Proc., Roy. Soc. Lond. , Series A356 , pp 215 – 236 ( 1977 ).
   Web of Science ®Google Scholar
• Shizhu , W. and Yongbin , Z. , “ Prevention of Film Slippage in Isothermal Pure Rolling Line Contact Elastohydrodynamic Lubrication Under Heavy Load ,” Jour. of Mech. Eng. (in Chinese) , 35 , pp 81 – 89 ( 1999 ).
   Google Scholar