Computed Effect of Rub-Groove Size on Stepped Labyrinth Seal Performance

REFERENCES

• Backshall , R G. and Landis , F. ( 1969 ), “ The Boundary-Layer Velocity Distribution in Turbulnet Swirling Pipe Flow ,” ASME Jour. Of Basic Engineering , 91 , pp 728 – 733
   Google Scholar
• Egli , A. ( 1935 ), “ The Leakage of Steam Through Labyrinth Seals ,” ASME Trans. Jour. of Fuels and Steam Power , 57 , pp 115 – 122
   Google Scholar
• Launder , B E. and Spalding , D B. ( 1974 ), “ The Numerical Computation of Turbulent Flows ,” Computer Methods in Applied Mechanics and Engineering , 3 , pp 269 – 289
   Google Scholar
• Leonard , B P. ( 1979 ), “ A Stable and Accurate Convective Modeling Procedure Based on Quadratic Upstream Interpolation ,” Computer Methods in Applied Mechanics and Engineering , 19 , pp 59 – 98
   Web of Science ®Google Scholar
• Rhode , D L. and Allen , B F. ( 1999 ), “ Measurement and Visualization of Leakage Effects of Rounded Teeth Tips and Rub-Grooves on Stepped Labyrinths ,” ASME No. 99-GT-377 , presented at the ASME International Gas Turbine and Aeroengine Congress and Exhibition, Indianapolis; also accepted for the ASME Jour. of Turbomachinery.
   Google Scholar
• Rhode , D L. and Allen , B F. ( 1998 ), “ Visualization and Measurements of Rub-Groove Leakage Effects on Straight-Through Labyrinth Seals ,” ASME No. 98-GT-506 , presented at the ASME International Gas Turbine and Aeroengine Congress and Exhibition, Stockholm.
   Google Scholar
• Rhode , D L. , Johnson , J W. and Broussard , D H. ( 1997a ), “ Flow Visualization and Leakage Measurements of Stepped Labyrinth Seals; Part 1: Annular Groove ,” ASME Jour. of Turbomachinery , 119 , pp 839 – 843
   Web of Science ®Google Scholar
• Rhode , D L. , Younger , J S. and Wernig , M D. ( 1997b ), “ Flow Visualization and Leakage Measurements of Stepped Labyrinth Seals; Part 2: Sloping Surfaces ,” ASME Jour. of Turbomachinery , 119 , pp 844 – 848
   Web of Science ®Google Scholar
• Rhode , D L. , Demko , J A. , Traegner , U K. , Morrison , G L. and Sobolik , S R. ( 1986 ), “ Predictions of Incompressible Flow in Labyrinth Seals ,” ASME Jour. of Fluids Engineering , 108 , pp 19 – 25
   Web of Science ®Google Scholar
• Rhode , D L. and Sobolik , S R. ( 1986 ), “ Simulation of Subsonic Flow Through a Generic Labyrinth Seal ,” ASME Jour. of Engineering for Gas Turbines and Power , 108 , pp 674 – 680
   Web of Science ®Google Scholar
• Stocker , H L. ( 1975 ), “ Advanced Labyrinth Seal Design Performance for High Pressure Ratio Gas Turbines ,” ASME No. 75-WA/GT-22.
   Google Scholar
• Stocker , H L. , Cox , D M. and Holle , G F. ( 1997 ), “ Aerodynamic Performance of Conventional and Advanced Design Labyrinth Seals with Solid—Smooth, Abradable, and Honeycomb Lands ,” Detroit Diesel Allison, Division of GMC, Indianapolis, Indiana, prepared for NASA, Contract NAS 3-20056.
   Google Scholar
• Yu , Z. and Childs , D W. ( 1995 ), “ Experimental Rotordynamic Coefficient and Static Characteristic Results for a Labyrinth Rotor Running Against a Grooved Stator with L/D = 0.466, C/r = 0.0036 ,” Mechanical Engineering Department, Turbomachinery Laboratories, Texas A&M University.
   Google Scholar
• Waschka , W. , Wittig , S. and Kim , S. ( 1992 ), “ Influence of High Rotational Speeds on the Heal Transfer and Discharge Coefficients in Labyrinth Seals ,” ASME Jour. of Turbomachinery , 114 , pp 462 – 468
   Web of Science ®Google Scholar
• Zimmerman , H. , Kammerer , A. and Wolff , K H. ( 1994 ), “ Performance of Worn Labyrinth Seals ,” ASME 94_GT_131 , presented at the International Gas Turbine and Aeroengine Congress and Exposition, The Hague, Netherlands.
   Google Scholar