Scuffing Characteristics of SAE 50B38 Steel Under Lubricated Conditions

REFERENCES

• American Society for Testing and Materials Standards D-2714-94 , ( 1994 ), “ Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine ,” ASTM, Philadelphia, PA.
   Google Scholar
• Andersson , S. and Salas-Russo , E. , ( 1994 ), “ The Influence of Surface Roughness and Oil Viscosity on the Transition in Mixed Lubricated Sliding Steel Contacts. ” Wear , 174 , pp 71 – 79
   Web of Science ®Google Scholar
• Askwith , T. C. , Cameron , A. and Crouch , R. F. , ( 1966 ), “ Chain Length of Additives in Relation to Lubricants in Thin Film and Boundary Lubrication ,” Pro. Roy. Soc., London , A 291 , pp 500 – 519
   Google Scholar
• Cameron , A. , ( 1985 ), “ On a Generalized Theory of Scuffing,” in Proc. 12th Leeds-Lyon Symp. on Trib. , The Institut National des Sciences Appliquées , Lyon , France , pp 3 – 9
   Google Scholar
• Cuotiongeo , E. C. and Chung , Y. W. , ( 1994 ), “ Prediction of Scuffing Failure Based on Competitive Kinetics of Oxide Formation and Removal: Application to Lubricated Sliding of AISI 52100 Steel on Steel ,” Trib. Trans. , 37 , 3 , pp 622 – 628
   Google Scholar
• Dyson , A. , ( 1976 ), “ The Failure of Elastohydrodynamic Lubrication of Circumferentially Ground Disks,” in Proc. Inst. Mech. Eng. , 190 , 1 , pp 52 – 76
   Google Scholar
• Evans , H. P. and Snidle , R. W. , ( 1996 ), “ A Model for Elastohydrodynamic Film Failure in Contacts Between Rough Surfaces Having Transverse Finish ,” Trans. of the ASME, Jour. of Trib. , 118 , 7 , pp 847 – 857
   Google Scholar
• Greenwood , J. A. and Williamson , B. P. , ( 1966 ), “ Contact of Nominally Flat Surfaces,” in Proc. Roy. Soc. London, Ser A , 295 , pp 300 – 319
   Web of Science ®Google Scholar
• Hirst , W. , and Hollander , A. E. , ( 1974 ), “ Surface Finish and Damage in Sliding,” in Proc. Roy. Soc. London, Ser A , 337 , pp 379 – 394
   Web of Science ®Google Scholar
• Houpert , L. G. and Hamrock , B. J. , ( 1985 ), “ Elastohydrodynamic Lubrication Calculations Used as a Tool to Study Scuffing,” in Proc. 12th Leeds-Lyon Symp. on Trib. , The Institut National des Sciences Appliquées. Lyon , France , pp 146 – 155
   Google Scholar
• Johnson , K. L. , Greenwood , J. A. and Poon , S. Y. , ( 1972 ), “ A Simple Theory of Asperity Contact in Elastohydrodynamic Lubrication ,” Wear , 19 , pp 91 – 108
   Web of Science ®Google Scholar
• Kim , K. and Ludema , K. C. , ( 1995 ), “ A Correlation Between Low Cycle Fatigue Properties and Scuffing Properties of 4340 Steel ,” Trans. of the ASME. Jour. of Trib. , 117 , 10 , pp 617 – 621
   Google Scholar
• Lee , S. C. and Cheng , H. S. , ( 1991 ). “ Scuffing Theory Modeling and Experimental Correlations ,” Trans, of the ASME. Jour, of Trib. , 113 , 4 , pp 237 – 334
   Google Scholar
• Lee , S. C. and Cheng , H. S. , ( 1995 ), “ Experimental Validation of the Critical Temperature-Pressure Theory of Scuffing ,” Trib. Trans. , 38 , 3 , pp 738 – 742
   Web of Science ®Google Scholar
• Martin , M. J. , Alanou , M. P. , Evans , H. P. and Snidle , R. W. , ( 2001 ), “ Scuffing Performance of M50 Bearing Steel Lubricated with a Gas Turbine Engine Oil at High Sliding Speeds ,” Trib. Trans. , 44 , 3 , pp 465 – 471
   Web of Science ®Google Scholar
• McCool , J. I. and Popgoshev , D. , ( 1985 ), “ Effect of Asperity Interaction on Scuffing,” in Proc. 12th Leeds-Lyon Symp. on Trib. , The Institut National des Sciences Appliquées , Lyon , France , pp 135 – 145
   Google Scholar
• O.E.C.D. , ( 1969 ), Glossary of Terms and Definitions in the Field of Friction, Wear and Lubrication , pp 52 – 53
   Google Scholar
• Patching , M. J. , Kweh , C. C. , Evans , H. P. and Snidle , R. W. , ( 1995 ), “ Conditions for Scuffing Failure of Ground and Superfinished Steel Disks at High Sliding Speeds Using a Gas Turbine Engine Oil ,” Trans, of the ASME, Jour, of Trib. , 117 , pp 482 – 489
   Web of Science ®Google Scholar
• Park , K. B. and Ludema , K. C. , ( 1994 ), “ Evaluation of the Plasticity Index as a Scuffing Criterion ,” Wear , 175 , pp 123 – 131
   Web of Science ®Google Scholar
• Somi Reddy , A. , Pramila Bai , B. N. , Murthy , K. S. S. and Biswas , S. K. , ( 1995 ), “ Mechanism of Seizure of Aluminum-Silicon Alloys Dry Sliding Against Steel ,” Wear , 181–183 , pp 658 – 667
   Web of Science ®Google Scholar
• Sheiretov , T. , Yoon , H. and Cusano , C. , ( 1998 ). “ Scuffing Under Dry Sliding Conditions Part I - Experimental Studies ,” Trib. Trans. , 41 , 4 , pp 435 – 446
   Web of Science ®Google Scholar
• Somi Reddy , A. , Pramila Bai , B. N. , Murthy , K. S. S. and Biswas , S. K. , ( 1994 ), “ Wear and Seizure of Binary Al-Si Alloys ,” Wear , 171 , pp 115 – 127
   Web of Science ®Google Scholar
• Spikes , H. A. and Cameron , A. , ( 1974 ), “ Scuffing as a Desorption Process - an Explanation of the Borsoff Effect ,” ASLE Trans. , 17 , pp 92 – 96
   Google Scholar
• Tallian , T. E. , ( 1967 ). “ On Competing Failure Modes in Rolling Contact ,” ASLE Trans. , 10 , pp 418 – 439
   Google Scholar
• Xue , O. J. and Ludema , K. C. , ( 1983 ), “ Plastic Failure Effects in Scuffing of Soft Metals ,” Wear of Materials , pp 499 – 506
   Google Scholar
• Yoon , H. , Sheiretov , T. and Cusano , C. , ( 2000 ), “ Scuffing of Area Contacts Under Starved Lubrication Conditions ,” Trib. Trans., 43 , 4 , pp 722 – 730
   Web of Science ®Google Scholar