REFERENCES
- Kiovsky , T. E. , Yates , N. C. and Bales , J. R. 1994 . “Fuel Efficient Lubricants and the Effect of Special Base Oils” . Lub. Engg. , 50 ( 4 ) : 307
- Comfort , A. 2003 . “An Introduction to Heavy-duty Diesel Engine Frictional Losses and Lubricant Properties Affecting Fuel Economy—Part I” . SAE 2003-01-3225
- Fukuoka , S. , Hara , N. , Mori , A. and Ohtsubo , K. 1997 . “Friction Loss Reduction by New Lighter Valvetrain System” . JASE Review , 18 : 107
- Masuda , M. , Ujino , M. , Shimoda , K. , Nishida , K. , Marumoto , I. and Moriyama , Y. 1997 . “Development of Titanium Nitride Coated Shim for a Direct Acting OHC Engine” . SAE paper No. 970002.
- Katoh , A. and Yasuda , Y. 1994 . “An Analysis of Friction Reduction Techniques for the Direct Acting Valvetrain System of a new Generation Lightweight 3-Liter V6 Nissan Engine” . SAE paper No. 940992.
- Izumida , H. , Nishioka , T. , Yamakawa , A. and Yamagiwa , M. 1997 . “A Study of the Effects of Ceramic Valvetrain Parts on Reduction of Engine Friction” . SAE paper No. 970003.
- Gangopadhyay , A. K. , McWatt , D. , Willermet , P. A. , Crosbie , G. M. and Allor , R. L. 1999 . “Effects of Composition and Surface Finish of Silicon Nitride Tappet Inserts on Valvetrain Friction” . In Proc. of the 25th Leeds-Lyon Symposium on Tribology, Tribology Series 36, Lyon, Sept. 8-11 635 – 644 .
- Gangopadhyay , A. K. , Soltis , E. and Johnson , M. D. 2004 . “Valvetrain Friction and Wear: Influence of Surface Engineering and Lubricants,” . Proc. Instn. Mech Engrs. , 218 ( Part J ) : 147 – 156 . (J. Engineering Tribology).
- Schamel , A. R. , Grischke , M. and Bethke , R. 1997 . “Amorphous Carbon Coatings for Low Friction and Wear in Bucket Tappet Valvetrains” . SAE paper No. 970004.
- Rao , V. D. N. and Cikanek , H. A. 1994 . “1.8L Sierra-Mondeo Turbo Diesel Valvetrain Friction Reduction Using Solid Film Lubricant” . SAE paper No. 941986.
- Ahn , S. G. , Ban , H. O. , Jo , B. L. , Kim , S. C. and Jung , S. C. 2000 . “Development of Supercarburized Tappet Shim to Improve Fuel Economy” . SAE paper No. 2000-01-0613.
- Ryk , G. , Kligerman , Y. and Etsion , I. 2002 . “Experimental Investigation of Laser Surface Texturing for Reciprocating Automotive Components” . Trib. Trans. , 45 : 444
- Ronen , A. , Etsion , I. and Kligerman , Y. 2001 . “Friction Reducing Surface Texturing in Reciprocating Automotive Components” . Trib. Trans. , 44 ( 3 ) : 359
- Wakuda , M. , Yamauchi , Y. , Kanzaki , S. and Yasuda , Y. 2003 . “Effect of Surface Texturing on Friction Reduction Between Ceramic and Steel Materials Under Lubricated Sliding Contact” . Wear , 254 : 356
- Golloch , R. , Merker , G. P. , Kessen , U. and Brinkmann , S. 2004 . “Benefits of Laser Structured Cylinder Liners for Internal Combustion Engines,” 14th International Colloquium Tribology, Jan 13-15, 2004, “Tribology and Lubrication Engineering,” . Edited by: Wilfred , Bartz . Vol 1.
- Etsion , I. 2005 . “State of the Art in Laser Texturing” . J. Tribology , 127 : 248 – 253 .
- Etsion , I. 2004 . “Laser Surface Texturing—Measure to Reduce Friction”, 14th International Colloquium Tribology, Jan 13-15, “Tribology and Lubrication Engineering,” . Edited by: Wilfred , Bartz . Vol 1, p 329.
- Dumitru , G. , Romano , V. , Weber , H. P. , Haefke , H. , Gerbig , Y. and Pfluger , E. 2000 . “Laser Microstructuring of Steel Surfaces for Tribological Applications” . Appl. Phys. , A70 : 485
- Blatter , A. , Maillat , M. , Pimenov , S. M. , Shafeev , G. A. and Simakin , A. V. 1998 . “Lubricated Friction of Laser Micro-Patterned Sapphire Flats” . Trib. Lett. , 4 : 237
- Wang , X. , Kato , K. , Adachi , K. and Aizawa , K. 2003 . “Loads Carrying Capacity Map for the Surface Texture Design of SiC Thrust Bearing Sliding in Water,” . Trib. Inter. , 36 : 189
- Gao , H. , Gangopadhyay , A. K. , McQueen , J. S. , Black , E. D. , Jensen , R. K. , Bjornen , K. K. and Soltis , E. A. 2003 . “Antiwear Performance of Low Phosphorous Engine Oils on Tappet Insert in Motored Sliding Valvetrain Test” . SAE paper No. 2003-01-3119.
- Willermet , P. A. and Pieprzak , J. M. 1989 . “Some Effects of Lubricant Composition and Tappet Rotation on Cam/Tappet Friction” . J. of Tribology. , 111 : 683
- Willermet , P. A. , Pieprzak , J. M. and Dailey , D. P. 1990 . “Tappet Rotation and Friction Reduction in a Center Pivot Rocker Arm Contact” . J. of Tribology , 112 : 655
- Gangopadhyay , A. K. , Carter III , R. O. , Simko , S. , Gao , H. , Bjornen , K. K. and Black , E. D. 2007 . “Valvetrain Friction and Wear Performance with Fresh and Used Low Phosphorous Engine Oils” . Trib. Trans. , 50 ( 3 ) : 350 – 360 .
- Varenberg , M. , Halperin , G. and Etsion , I. 2002 . “Different Aspects of the Role of Wear Debris in Fretting Wear” . Wear , 252 : 902 – 910 .