Prediction of Contact Temperature Distribution during Fretting Fatigue in Titanium Alloys

REFERENCES

• Hoeppner , D. W. and Goss , G. L. 1974 . A Fretting-Fatigue Damage Threshold Concept . Wear , 27 : 61 – 70 .
   Web of Science ®Google Scholar
• Wharton , M. H. and Waterhouse , R. B. 1980 . Environmental Effects in the Fretting Fatigue of Ti-6Al 4V . Wear , 62 : 287 – 297 .
   Web of Science ®Google Scholar
• Lutynski , C. , Simansky , G. and McEvily , A. J. 1982 . Fretting Fatigue of Ti-6Al 4V Alloy,” Materials Evaluation under Fretting Conditions: ASTM STP 780 . : 150 – 164 . American Society for Testing and Materials
   Google Scholar
• Nicolaou , P. D. , Shell , E. B. and Matikas , T. E. 1999 . Microstructural and Surface Characterization of Ti-6Al 4V Alloys after Fretting Fatigue . Materials Science and Engineering A , 269 ( 1-2 ) : 98 – 103 .
   Google Scholar
• Nakazawa , K. , Sumita , M. and Maruyama , N. 1992 . “ Effect of Contact Pressure on Fretting Fatigue of High Strength Steel and Titanium Alloy ” . In Standardization of Fretting Fatigue Test Methods and Equipment , Edited by: Helmi Attia , M. and Waterhouse , R. B. 115 – 125 . American Society for Testing and Materials . ASTM STP 1159
   Google Scholar
• Antoniou , R. A. and Radtke , T. C. 1997 . Mechanisms of Fretting-Fatigue of Titanium Alloys . Materials Science and Engineering , A237 : 229 – 240 .
   Google Scholar
• Asai , K. 2006 . Fretting Fatigue Strength under High Local Contact Pressure and its Fracture Mechanics Analysis . Zairyo/Journal of the Society of Materials Science, Japan , 55 ( 12 ) : 1102 – 1109 .
   Google Scholar
• Lee , H. , Mall , S. , Sanders , J. H. , Sharma , S. K. and Magaziner , R. S. 2007 . Characterization of Fretting Wear Behavior of Cu-Al Coating on Ti-6Al 4V Substrate . Tribology International , 40 ( 8 ) : 1301 – 1310 .
   Google Scholar
• Golden , P. J. , Hutson , A. , Sundaram , V. and Arps , J. H. 2007 . Effect of Surface Treatments on Fretting Fatigue of Ti-6Al 4V . International Journal of Fatigue , 29 ( 7 ) : 1302 – 1310 .
   Google Scholar
• Matikas , T. E. and Nicolaou , P. D. 2001 . Development of a Model for the Prediction of the Fretting Fatigue Regimes . Journal of Materials Research , 16 ( 9 ) : 2716 – 2723 .
   Google Scholar
• Wright , K. H. R. 1952 . Investigation of Fretting Corrosion . Proc. Instn. Mech. Engrs. , 1B : 556
   Google Scholar
• Waterhouse , R. B. 1961 . Influence of Local Temperature Increases on the Fretting Corrosion of Mild Steel . J. Iron and Steel Inst. , 197 : 301
   Google Scholar
• Alyabev , A. Y. , Kazimirchik , Yu. A. and Onoprienko , V. P. 1973 . Determination of Temperature in the Zone of Fretting Corrosion . Soviet Materials Science. , 6 ( 3 ) : 284 – 286 .
   Google Scholar
• Archard , J. F. and Rowntree , R. A. 1988 . Metallurgical Phase Transformations in the Rubbing of Steels . Proc. R. Soc. Lond. A , 418 : 405 – 424 .
   Google Scholar
• Vodopivec , F. , Vizintin , J. and Sutari , B. 1996 . Effect of Fretting Amplitude on Microstructure of 1C-1.5Cr Steel . Mater. Sci. Technol. , 12 : 355 – 360 .
   Web of Science ®Google Scholar
• Podgornik , B. , Kalin , M. , Vizintin , J. and Vodopivec , F. 2001 . Microstructural Changes and Contact Temperatures during Fretting in Steel-Steel Contact . J. Tribol. , 123 : 670 – 675 .
   Google Scholar
• Kalin , M. and Vizintin , J. 2001 . High Temperature Phase Transformations under Fretting Conditions . Wear , 249 (3-4) : 172 – 181 .
   Google Scholar
• Kalin , M. and Vizintin , J. 2001 . A Tentative Explanation for the Tribochemical Effects in Fretting Wear . Wear , 250 : 681 – 689 .
   Google Scholar
• Pape , J. A. and Neu , R. W. 2001 . Fretting Fatigue Damage Accumulation in PH 13-8 Mo Stainless Steel . Int. J. Fatigue , 23 ( Suppl. 1 ) : 437 – 444 .
   Google Scholar
• Pape , J. A. and Neu , R. W. 2007 . Subsurface Damage Development during Fretting Fatigue of High Strength Steel . Tribology International , 40 : 1111 – 1119 .
   Google Scholar
• Sarkar , A. D. 1976 . Wear of Metals , New York : Pergamon Press .
   Google Scholar
• Barber , J. R. 1969 . The Conduction of Heat from Sliding Solids . Int. J. Heat Mass Transfer , 13 : 857 – 869 .
   Web of Science ®Google Scholar
• Dow , T. A. 1980 . Thermoelastic Effects in a Thin Sliding Seal-A Review . Wear , 59 : 31 – 52 .
   Google Scholar
• Beck , J. V. 1979 . Effects of Multiple Sources in the Contact Conductance Theory . ASME J. Heat Transfer , 101 : 132 – 136 .
   Google Scholar
• Mimic , B. B. 1974 . Thermal Contact Conductance; Theoretical Considerations . Int. J. Heat Mass Transfer , 17 : 205 – 215 .
   Google Scholar
• Bill , R. C. 1982 . “ Review of Factors that Influence Fretting Wear ” . In Materials Evaluation under Fretting Conditions , Vol. 780 , 165 – 182 . Philadelphia, PA : ASTM Special Technical Publication .
   Google Scholar
• Wang , S. and Komvopoulos , K. 1995 . A Fractal Theory of the Temperature Distribution at Elastic Contacts of Fast Sliding Surfaces . ASME J. Tribology , 117 : 203 – 215 .
   Web of Science ®Google Scholar
• Yeo , T. and Barber , J. R. 1996 . Finite Element Analysis of the Stability of Static Thermoelastic Contact . J. Thermal Stresses , 19 : 169 – 184 .
   Web of Science ®Google Scholar
• Attia , M. H. and D'Silva , N. S. 1985 . Effect of Mode of Motion and Process Parameters on the Prediction of Temperature Rise in Fretting . Wear , 106 : 203 – 224 .
   Google Scholar
• Carslaw , H. S. and Jaeger , J. C. 1959 . Conduction of Heat in Solids , 2nd Ed. , NY : Oxford University Press .
   Google Scholar
• Johnson , K. L. 1985 . Contact Mechanics , UK : Cambridge University Press .
   Google Scholar
• Szolwinski , M. P. , Harish , G. , Farris , T. N. and Sakagami , T. 1999 . In-Situ Measurement of Near-Surface Fretting Contact Temperatures in an Aluminum Alloy . ASME Journal of Tribology , 121 ( 1 ) : 11 – 19 .
   Google Scholar
• Harish , G. , Szolwinski , M. P. , Farris , T. N. and Sakagami , T. 2000 . “ Evaluation of Fretting Stresses through Full-Field Temperature Measurements ” . In Fretting Fatigue: Current Technologies and Practices , Edited by: Hoeppner , D. W. , Chandrasekaran , V. and Elliot , C. B. Vol. 1367 , 423 – 435 . West Conshohocken, PA : ASTM . ASTM STP
   Google Scholar
• Waterhouse , R. B. 1992 . Fretting Fatigue . Int. Mater. Rev. , 37 ( 2 ) : 77 – 97 .
   Google Scholar
• Blanchard , P. , Colombie , C. , Pellerin , V. , Fayeulle , S. and Vincent , L. 1991 . Material Effects in Fretting Wear: Application to Iron, Titanium, and Aluminum Alloys . Metall. Trans. A , 22 ( 7 ) : 1535 – 1544 .
   Google Scholar
• Fayeulle , S. , Blanchard , P. and Vincent , L. 1993 . Fretting Behavior of Titanium Alloys . STLE Tribol. Trans. , 36 ( 2 ) : 267 – 275 .
   Web of Science ®Google Scholar