A Review on Grease Lubrication in Rolling Bearings

REFERENCES

• Ito , H. , Koizumi , H. and Naka , M. 1995 . “ Grease Life Equations for Sealed Ball Bearings ” . In Proceedings of the International Tribology Conference , 931 – 936 . Japan : Yokohama .
   Google Scholar
• Huiskamp , B. 2004 . Grease Life in Lubricated-for-Life Deep Groove Ball Bearings . Evolution , 2 : 26 – 28 .
   Google Scholar
• Bartz , W. J. 2000 . Schmierfette, Zusammensetzung, Eigenschaften, Prüfung und Anwendung Renningen-Malmsheim: ExpertVerlagv(Kontakt&Studium); Band 500
   Google Scholar
• Harris , T. A. 2001 . Rolling Bearing Analysis , 4th , New York : John Wiley & Sons .
   Google Scholar
• National Lubricating Grease Institute (NLGI) . 1987 . Lubricating Grease Guide , 2nd Kansas City
   Google Scholar
• Bauer , W. H. , Finkelstein , A. P. and Wiberley , S. E. 1960 . Flow Properties of Lithium Stearate-Oil Model Greases as a Function of Soap Concentration and Temperature . ASLE Transactions , 3 : 215 – 224 .
   Google Scholar
• Hurley , S. 2000 . “ Fundamental Studies of Grease Lubrication in Elastohydrodynamic Contacts ” . UK : University of London, Imperial College of Science, Technology and Medicine . PhD Thesis
   Google Scholar
• Forster , E. O. , Kolfenbach , J. J. and Leland , H. L. 1956 . Fibers, Forces and Flow . NLGI Spokesman , 20 ( 3 ) : 16 – 22 .
   Google Scholar
• Scarlett , N. A. 1967 . Use of Grease in Rolling Bearings . Proc. IMechE. Part 3A , 182 : 167 – 171 .
   Google Scholar
• Magnin , A. and Piau , J. M. 1989 . Application of Freeze-Fracture Technique for Analysing the Structure of Lubricating Greases . Journal of Materials Research , 4 ( 4 ) : 990 – 995 .
   Web of Science ®Google Scholar
• Shuff , P. J. and Clarke , L. J. 1991 . The Structure of Grease via Electron Microscopy and Image Analysis . Lubrication Science , 4 ( 1 ) : 35 – 50 .
   Google Scholar
• Hurley , S. and Cann , P. M. 2001 . Examination of Grease Structure by SEM and AFM Techniques . NLGI Spokesman , 65 ( 5 ) : 17 – 26 .
   Google Scholar
• Shin , M. , Shiraishi , T. and Sakai , H. 2006 . “ Visualization of Grease Flow in Shear Field ” . In Proceedings of ASIATRIB 2006 , 263 – 264 . Japan : Kanazawa .
   Google Scholar
• Salomonsson , L. , Stang , G. and Zhmud , B. 2007 . Oil/Thickener Interactions and Rheology of Lubricants . Tribology Transactions , 50 : 302 – 309 .
   Web of Science ®Google Scholar
• van den Kommer , A. and Ameye , J. 2001 . “ Prediction of Remaining Grease Life-A New Approach and Method by Linear Sweep Voltammetry ” . In Proceedings Esslingen Conference 891 – 896 .
   Google Scholar
• Gow , G. 2007 . “ Ecclesiastes 3:1, Time for a New Approach? ” . In NLGI pre-print, presented at the NLGI 74th Annual Meeting , Arizona : Scottsdale .
   Google Scholar
• Gow , G. 1995 . Alassca, A Complex Complex . NLGI Spokesman , 59 ( 1 ) : 10 – 18 .
   Google Scholar
• McClintock , R. 1980 . A Laboratory Study of Wheel Bearing Grease High Temperature Life . NLGI Spokesman , 43 : 414
   Google Scholar
• Rohr , O. 2007 . Preformed Soap as Thickener and ep-Additive for Grease Production . NLGI Spokesman , 71 ( 1 ) : 15 – 20 .
   Google Scholar
• Kaperick , J. 2007 . Timken OK Load-Media Bias?, A Comparison of Timken Response to Similar Additive Systems in Both Grease and Oil Formulations . NLGI Spokesman , 71 ( 5 ) : 13 – 17 .
   Google Scholar
• Pavlov , V. P. and Vinogradov , G. V. 1965 . Generalized Characteristics of Rheological Properties of Greases . ASLE Lubrication Engineering , Nov. : 479 – 484 .
   Google Scholar
• Gow , G. M. 1991 . The CEY to Grease Rheology . Transactions of Mechanical Engineering, The Institution of Engineers, Australia, Special Issue Tribology , ME16 ( 3 ) : 202 – 205 .
   Google Scholar
• Couronné , I. , Blettner , G. and Vergne , P. 2000 . Rheological Behavior of Greases: Part I—Effects of Composition and Structure . Tribology Transactions , 43 ( 4 ) : 619 – 626 .
   Web of Science ®Google Scholar
• Couronné , I. and Vergne , P. 2000 . Rheological Behavior of Greases: Part II—Effect of Thermal Aging, Correlation with Physico-Chemical Changes . Tribology Transactions , 43 ( 4 ) : 788 – 794 .
   Web of Science ®Google Scholar
• Couronné , I. , Vergne , P. , Ponsonnet , L. , Truong-Dinh , N. Girodin , D. 2000 . “ Influence of Grease Composition on its Structure and its Rheological Behavior ” . In Poceedings of the Leeds-Lyon Conference, Thinning Films and Tribological Interfaces Edited by: Dowson , D. 425 – 432 .
   Google Scholar
• ASTM Standard No.D2 17-88 . 1991 . “ Standard Test Methods for Cone Penetration of Lubricating Grease ” . In Annual Book of ASTM Standards , Philadelphia, PA : American Society for Testing and Materials .
   Google Scholar
• ASTM Standard No.D2 1831-88 . 1991 . “ Standard Test Methods for Roll Stability of Lubricating Grease ” . In Annual book of ASTM standards , Philadelphia, PA : American Society for Testing and Materials .
   Google Scholar
• Karis , T. E. , Kono , R.-N. and Jhon , M. 2003 . Harmonic Analysis in Grease Rheology . Journal of Applied Polymer Science , 90 : 334 – 343 .
   Web of Science ®Google Scholar
• Czarny , R. 1990 . Temperaturabhängigkeit einiger rheologischer parameter von schmierfetten . Schmierungstechnik, Berlin , 21 ( 1 ) : 10
   Google Scholar
• Forster , E. O. and Kolfenbach , J. J. 1958 . Viscoelastic Behavior of Greases . ASLE Transactions , : 13 – 24 .
   Google Scholar
• Yoesif , A. E. 1982 . Rheological Properties of Lubricating Greases . Wear , 82 : 13 – 25 .
   Google Scholar
• Paszkowski , M. 2008 . “ Identification of the Thixotropy of Lithium Greases ” . In Proceeding of the 18th International Colloquim Tribology TA, Esslingen
   Google Scholar
• Hurley , S. and Cann , P. M. 2000 . Starved Lubrication of EHL Contacts-Relationship to Bulk Grease Properties . NLGI Spokesman , 64 ( 2 ) : 15 – 23 .
   Google Scholar
• Mérieux , J-S , Hurley , S. , Lubrecht , A. A. and Cann , P. M. 2000 . “ Shear-Degradation of Grease and Base Oil Availability in Starved EHL Lubrication ” . In Proc. 26th Leeds-Lyon Symposium on Tribology , 581 – 588 . Netherlands : Elsevier .
   Google Scholar
• Poon , S. Y. 1972 . Experimental Study of Grease in Elastohydrodynamic Lubrication . Journal of Lubrication Technology Transations ASME , 94 ( 1 ) : 27 – 34 .
   Web of Science ®Google Scholar
• Wilson , A. R. 1979 . The Relative Film Thickness of Grease and Oil Films in Rolling Bearings . Proc. Inst. Mech. Eng. , 193 : 185 – 192 .
   Google Scholar
• Barz , M. 1996 . “ Die schmierfilmbuildung in fettgeschmierten schnellaufenden spindellager ” . Germany : University of Hannover . PhD Thesis
   Google Scholar
• Wikström , V. and Jacobson , B. 1997 . Loss of Lubricant from Oil Lubricated Near-Starved Spherical Roller Bearings . IMechE Journal of Engineering Tribology, Part J. , 21 ( 1 ) : 51 – 55 .
   Web of Science ®Google Scholar
• Heemskerk , R. S. , Vermeiren , K. N. and Dolfsma , H. 1982 . Measurement of Lubrication Condition in Rolling Element Bearings . ASLE Transactions , 24 ( 4 ) : 519 – 527 .
   Web of Science ®Google Scholar
• Åström , H. , Isaksson , O. and Höglund , E. 1991 . Video Recordings of an EHL Point Contact Lubricated with Grease . Tribology International , 24 ( 3 ) : 179 – 184 .
   Web of Science ®Google Scholar
• Williamson , B. P. , Kendall , D. L.R. and Cann , P. M. 1993 . The Influence of Grease Composition on Film Thickness in EHD Contacts . NLGI Spokesman , 57 ( 8 ) : 13 – 18 .
   Google Scholar
• Kaneta , M. , Ogata , T. , Takubo , Y. and Naka , M. 2000 . Effects of Thickener Structure on Grease Elastohydrodynamic Lubricant Films . Proc. Instn. Mech. Engrs., Part J., Journal of Engineering Tribology , 214 : 327 – 336 .
   Google Scholar
• Booser , E. R. and Wilcock , D. F. 1953 . Minimum Oil Requirements of Ball Bearings . Lubrication Engineering , 9 : 156 – 158 .
   Google Scholar
• Baker , A. E. 1958 . Grease Bleeding—A Factor in Ball Bearing Performance . NLGI Spokesman , 22 : 271 – 279 .
   Google Scholar
• Cann , P. M. and Spikes , H. 1992 . Film Thickness Measurements of Lubricating Greases under Normally Starved Conditions . NLGI Spokesman , 56 ( 2 ) : 21 – 27 .
   Google Scholar
• Cann , P. M. , Williamson , B. P. , Coy , R. C. and Spikes , H. 1992 . The Behavior of Greases in Elastohydrodynamic Contacts . J. Phys. D: Appl. Phys. , 25 : A124 – A132 .
   Web of Science ®Google Scholar
• Cann , P. M. and Hurley , S. 1998 . “ IR Spectroscopic Analysis of Grease Lubricant Films in Rolling Contacts ” . In Proceedings 25th Leeds-Lyon Symposium on Tribology , 589 – 600 . Netherlands : Elsevier .
   Google Scholar
• Farcas , F. and Gafitanu , M. D. 1999 . Some Influence Parameters on Greases Lubricated Rolling Contacts Service Life . Wear , : 1004 – 1010 .
   Google Scholar
• Cann , P. M. , Doner , J. P. , Webster , M. N. and Wikström , V. 2001 . Grease Degradation in Rolling Element Bearings . Tribology Transactions , 44 ( 3 ) : 399 – 404 .
   Web of Science ®Google Scholar
• Cann , P. M. , Doner , J. P. , Webster , M. N. , Wikström , V. and Lugt , P. M. 2007 . Grease Degradation in ROF Bearing Tests . Tribology Transactions , 50 ( 2 ) : 187 – 197 .
   Web of Science ®Google Scholar
• Milne , A. A. , Scott , D. and Scott , H. M. 1957 . “ Observations on the Movement and Structure of Grease in Roller Bearings ” . In Proc. Instn. Mech. Engrs, Conference on Lubrication and Wear 450 – 453 .
   Google Scholar
• Lansdown , A. R. and Gupta , R. 1985 . The Influence of Evaporation on Grease Life . NLGI Spokesman , July : 148 – 153 .
   Google Scholar
• Wikström , V. and Höglund , E. 1996 . Starting and Steady-State Friction Torque of Grease-Lubricated Rolling Element Bearings at Low Temperatures—Part II: Correlation with Less-Complex Test Methods . Tribology Transactions , 39 ( 3 ) : 684 – 690 .
   Web of Science ®Google Scholar
• Dalmaz , G. and Nantua , R. 1987 . An Evaluation of Grease Behavior in Rolling Bearing Contacts . Lubrication Engineering , 43 ( 12 ) : 905 – 915 .
   Google Scholar
• Mas , R. and Magnin , A. 1996 . Rheological and Physical Studies of Lubricating Greases Before and After Use in Bearings . ASME Journal of Tribology , 118 : 681 – 686 .
   Web of Science ®Google Scholar
• Jonkisz , W. and Krzemiñski-Fredihave , H. 1979 . Pressure Distribution and Shape of an Elastohydrodynamic Grease Film . Wear , 55 : 81 – 89 .
   Web of Science ®Google Scholar
• Kauzlarich , J. J. and Greenwood , J. A. 1972 . Elastohydrodynamic Lubrication with Herschel-Bulkley Model Greases . Trans. ASLE , 4 : 269 – 277 .
   Google Scholar
• Bordenet , L. , Dalmaz , G. , Chaomleffel , J.-P. and Vergne , F. 1990 . A Study of Grease Film Thickness in Elastorheodynamic Rolling Point Contacts . Lubrication Science , 2 : 273 – 284 .
   Google Scholar
• Yang , Z. and Qian , X. 1987 . A Study of Grease Film Thickness in Elastorheodynamic Rolling Point Contacts . ImechE Conference Publication , 1 ( 5 ) : 97 – 104 .
   Google Scholar
• Aihara , S. and Downson , D. 1978 . “ A Study of Film Thickness in Grease Lubricated Elastohydrodynamic Contacts ” . In Proc. 5th. Leeds-Lyon Symp. on Tribol. , 105 – 115 . London, , UK : Mech. Eng. Publishers .
   Google Scholar
• Saman , W. Y. 1974 . “ A Study on Starved Elasto-Hydrodynamic Lubrication with Particular Reference to Gyroscopic Bearings ” . UK : University of Leeds . PhD Thesis
   Google Scholar
• Chevalier , F. , Lubrecht , A. A. , Cann , P. M.E. , Colin , F. and Dalmaz , G. 1998 . Film Thickness in Starved EHL Point Contacts . Transactions of the ASME, Journal of Tribology , 120 : 126 – 133 .
   Web of Science ®Google Scholar
• Damiens , B. , Venner , C. H. , Cann , P. M. and Lubrecht , A. A. 2004 . Starved Lubrication of Elliptical EHD Contacts . ASME Journal of Tribology , 126 ( 1 ) : 105 – 111 .
   Web of Science ®Google Scholar
• Damiens , B. 2003 . “ Modelisation de la Lubrification Sous-Alimentee dans les Contactes Elastohydrodynamiques Elliptiques ” . France : Institut National des Sciences Appliquees de Lyon . PhD Thesis
   Google Scholar
• van Zoelen , M. T. , Venner , C. H. and Lugt , P. M. 2009 . Prediction of Film Thickness Decay in Starved Elasto-Hydrodynamically Lubricated using a Thin Film Layer . Proc. I. Mech. E., Journal of Engineering Tribology, Part J , 2 in press
   Google Scholar
• Chiu , Y. P. 1973 . An Analysis and Prediction of Lubricant Film Starvation in Rolling Contact Systems . ASLE Transactions , 17 : 22 – 35 .
   Web of Science ®Google Scholar
• Jacod , B. , Publier , F. , Cann , P. M.E. and Lubrecht , A. A. 1998 . An Analysis of Track Replenishment Mechanisms in the Starved Regime . 25th Leeds-Lyon Symposium on Tribology, Elsevier Tribology Series , 36 : 483 – 492 .
   Google Scholar
• Gershuni , L. , Larson , M. G. and Lugt , P. M. 2008 . Replenishment in Rolling Bearings . Tribology Transactions , 51 : 643 – 651 .
   Web of Science ®Google Scholar
• van Zoelen , M. T. , Venner , C. H. and Lugt , P. M. 2008 . Free Surface Thin Layer Flow on Bearing Raceways . ASME Journal of Tribology , 130 ( 2 ) : 021802 – 1-021802-10 .
   Web of Science ®Google Scholar
• Damiens , B. , Lubrecht , A. A. and Cann , P. M. 2004 . Influence of Cage Clearance on Bearing Lubrication . Tribology Transactions , 47 : 2 – 6 .
   Web of Science ®Google Scholar
• Joshi , A. , Marble , S. and Sadeghi , F. 2001 . Bearing Cage Temperature Measurement using Radio Telemetry . Proc. Instn. Mech. Engrs, Part J., Journal of Engineering Tribology , 215 : 471 – 481 .
   Google Scholar
• Komatsuzaki , S. , Uematsu , Y. and Kobayashi , T. 2000 . Change of Grease Characteristics to the End of Lubricating Life . NLGI Spokesman , 63 : 22
   Google Scholar
• Cann , P. M. and Lubrecht , A. A. 1999 . An Analysis of the Mechanisms of Grease Lubrication in Rolling Element Bearings . Lubrication Science , 11 : 227 – 245 .
   Google Scholar
• Lugt , P. M. , Velickov , S. and Tripp , J. H. 2009 . “ On the Chaotic Behavior of Grease Lubrication in Rolling Bearings ” . In Tribology Transactions in press
   Google Scholar
• Cobb , L. D. 1952 . Grease Lubrication of Ball Bearings . Lubrication Engineering , 8 : 120 – 124 .
   Google Scholar
• Larsson , P.-O. , Jacobson , B. and Höglund , E. 1994 . Oil Drops Leaving an EHD Contact . Wear , 179 : 23 – 28 .
   Web of Science ®Google Scholar
• Bramhall , A. D. and Hutton , J. F. 1960 . Wall Effect in the Flow of Lubricating Grease in Plunger Viscosimeters . Br. J. Appl. Phys. , 11 : 363 – 369 .
   Web of Science ®Google Scholar
• Czarny , R. 2004 . The Influence of Surface Material and Topography on the Wall Effect of Grease . Lubrication Science , 14-2 : 255 – 274 .
   Google Scholar
• Czarny , R. and Moes , H. 1981 . Some Aspects of Lubricating Grease Flow . Proc. of the 3rd Int. Cong. Trib. Eurotrib 8 , 3 : 68 – 85 .
   Google Scholar
• Vinogradov , G. W. , Froishteter , G. B. and Trillski , K. K. 1978 . The Generalized Theory of Flow of Plastic Disperse Systems with Account of the Wall Effect . Rheol. Acta , 17 : 156 – 165 .
   Web of Science ®Google Scholar
• Delgado , M. A. , Franco , J. M. , Partal , P. and Gallegos , C. 2005 . Experimental Study of Grease Flow in Pipes: Wall Slip and Air Entrainment Effects . Chemical Engineering and Processing , 44 : 805 – 817 .
   Web of Science ®Google Scholar
• van Zoelen , M. T. , Venner , C. H. and Lugt , P. M. 2008 . “ Centrifugal Effects and Free Surface Thin Layer Flow in Roller Bearings ” . In Presented at the STLE annual meeting , OH : Cleveland .
   Google Scholar
• Andersson , T. 1983 . Endurance Testing in Theory . Ball Bearing Journal , 217 : 14 – 23 .
   Google Scholar
• Lundberg , G. and Palmgren , A. 1947 . Dynamic Capacity of Rolling Bearings . Acta Polytechnica Scandinavia, Mechanical Engineering Series, Royal Swedish Academy of Engineering Sciences , 1 ( 3 )
   Google Scholar
• Ioannides , E. , Bergling , G. and Gabelli , A. 1999 . “ An Analytical Formulation for the Life of Rolling Bearings ” . In Acta Polytechnica Scandinavia, Mechanical Engineering Series, Finnish Academy of Technology
   Google Scholar