Effect of ZrB₂ on the Microstructure and Wear Resistance of Ni-Based Composite Coating Produced on Pure Ti by Laser Cladding

REFERENCES

• Gordin , D. M. , Gloriant , T. , Bohn , M. , Guillou , A. , Thibon , I. and Ansel , D. 2005 . “Characterization of a Laser-Nitrided Titanium Alloy by Electron Backscattered Diffraction and Electron Probe Microanalysis,” . Surface and Interface Analysis , 37 : 1161 – 1167 .
   Google Scholar
• Jin , O. , Mall , S. and Hager , C. H. 2007 . “Fretting Fatigue Behavior of Cu-Al-Coated Ti-6AI-4V,” . Tribology Transactions , 50 ( 4 ) : 497 – 506 .
   Web of Science ®Google Scholar
• Tsuji , N. , Tanaka , S. and Takasugi , T. 2008 . “Evaluation of Surface-Modified Ti–6Al–4V Alloy by Combination of Plasma-Carburizing and Deep-Rolling,” . Materials Science and Engineering A , 488 : 139 – 145 .
   Web of Science ®Google Scholar
• Baker , T. N. and Selamat , M. S. 2008 . “Surface Engineering of Ti–6Al–4V by Nitriding and Powder Alloying Using CW CO2 Laser,” . Materials Science and Technology , 24 ( 4 ) : 189 – 200 .
   Google Scholar
• Yildiz , F. , Yetim , A. F. , Alsaran , A. and Çelik , A. 2008 . “Plasma Nitriding Behavior of Ti6Al4V Orthopedic Alloy,” . Surface and Coatings Technology , 202 : 2471 – 2476 .
   Web of Science ®Google Scholar
• Liu , H. X. , Tang , B. Y. , Wang , L. P. and Wang , X. F. 2005 . “Improvement on Surface Properties of Titanium Alloy by Plasma Immersion Ion Implantation Technique,” . Rare Metal Materials and Engineering , 34 ( 8 ) : 1318 – 1321 .
   Google Scholar
• Abboud , J. H. , Fidel , A. F. and Benyounis , K. Y. 2008 . “Surface Nitriding of Ti-6Al-4V Alloy with a High Power CO2 Laser,” . Optics & Laser Technology , 40 ( 2 ) : 405 – 414 .
   Google Scholar
• Duraiselvam , M. , Galun , R. , Wesling , V. , Mordike , B. L. , Reiter , R. , Oligmuller , J. and Buvanashekaran , G. 2007 . “Cavitation Erosion Resistance of Ti6Al4V Laser Alloyed with TiC-Reinforced Dual Phase Intermetallic Matrix Composites,” . Materials Science and Engineering A , 454 : 63 – 68 .
   Google Scholar
• Conde , A. , Zubiri , F. and de Damborenea , Y. J. 2002 . “Cladding of Ni-Cr-B-Si Coatings with a High Power Diode Laser,” . Materials Science and Engineering A , 334 ( 1-2 ) : 233 – 238 .
   Web of Science ®Google Scholar
• Wu , X. L. and Hong , Y. S. 2001 . “Microstructure and Mechanical Properties at TiCp/Ni-Alloy Interfaces in Laser-Synthesized Coatings,” . Materials Science and Engineering A , 318 ( 1-2 ) : 15 – 21 .
   Google Scholar
• Gruzdys , E. , Meskinis , S. and Juraitis , A. 2009 . “Influence of WC/Co Concentration on Structure and Mechanical Properties of the Thermally Sprayed WC/Co-NiCrBSi Coatings,” . Materials Science , 15 ( 1 ) : 35 – 39 .
   Google Scholar
• Si , S.-H. , Yuan , X.-M. , Liu , Y.-L. , He , Y.-Z. and Keesam , S. 2006 . “Effect of Laser Power on Microstructure and Wear Resistance of WCP/Ni Cermet Coating,” . Journal of Iron and Steel Research International , 13 ( 3 ) : 74 – 78 .
   Web of Science ®Google Scholar
• Sun , R. L. , Niu , W. and Wang , C. Y. 2007 . “Microstructure and Wear Resistance of TiN-NiCrBSi Laser Clad Layer on Titanium Alloy Surface,” . Rare Metal Materials and Engineering , 36 ( 1 ) : 7 – 10 .
   Google Scholar
• Galan , C. A. , Ortiz , A. L. , Guiberteau , F. and Shaw , L. L. 2009 . “Crystallite Size Refinement of ZrB2 by High-Energy Ball Milling,” . Journal of the American Ceramic Society , 92 ( 12 ) : 3114 – 3117 .
   Google Scholar
• Hu , P. , Zhang , X. H. , Han , J. C. , Luo , X. G. and Du , S. Y. 2010 . “Effect of Various Additives on the Oxidation Behavior of ZrB2-Based Ultra-High-Temperature Ceramics at 1800 Degrees C,” . Journal of the American Ceramic Society , 93 ( 2 ) : 345 – 349 .
   Google Scholar
• Selvan , J. S. , Subramanian , K. , Nath , A. K. , Kumar , H. , Ramachandra , C. and Ravindranathan , S. P. 1999 . “Laser Boronising of Ti–6Al–4V as a Result of Laser Alloying with Pre-Placed BN,” . Materials Science and Engineering A , 260 : 178 – 187 .
   Web of Science ®Google Scholar
• Eskin , S. , Zahavi , J. and Berner , A. 1995 . “CO2-Laser Nitriding as a Result of Ti Coating Modification in a Nitrogen Atmosphere. 1. Features of Nitriding Process,” . Laser Engineering , 4 ( 2 ) : 85 – 96 .
   Web of Science ®Google Scholar
• Yan , M. , Liu , B. and Li , J. 2001 . China Aeronautical Materials Handbook , 2nd ed. , Beijing : Standards Press of China .
   Google Scholar
• Amado , J. M. , Tobar , M. J. , Alvarez , J. C. , Lamas , J. and Yanez , A. 2009 . “Laser Cladding of Tungsten Carbides (Spherotene (R)) Hardfacing Alloys for the Mining and Mineral Industry,” . Applied Surface Science , 255 ( 10 ) : 5553 – 5556 .
   Google Scholar
• Chao , M.-J. , Wang , W.-L. , Liang , E.-J. and Ouyang , D. 2008 . “Microstructure and Wear Resistance of TaC Reinforced Ni-Based Coating by Laser Cladding,” . Surface and Coatings Technology , 202 ( 10 ) : 1918 – 1922 .
   Google Scholar
• Zhu , Y.-C. , Yukimura , K. , Ding , C.-X. and Zhang , P.-Y. 2001 . “Tribological Properties of Nanostructured and Conventional WC-Co Coatings Deposited by Plasma Spraying,” . Thin Solid Films , 383 : 277 – 282 .
   Google Scholar
• Archard , J. F. 1953 . “Contact and Rubbing of Flat Surfaces,” . Journal of Applied Physics , 24 ( 8 ) : 981 – 988 .
   Web of Science ®Google Scholar