Effect of Dust Particle Inflow on the Wear of Rubber Seal Material in Automobile Chassis System

REFERENCES

• Duyun , S. W. and Lauwerys , X. A. 2001 . “Methodology for Accelerating Life Tests on Shock Absorbers,” . SAE Technical Paper 01-1103.
   Google Scholar
• Degrange , J. M. , Thominea , M. , Kapsa , Ph. , Pelletier , J. M. , Chazeau , L. , Vigier , G. , Dudragne , G. and Guerbé , L. 2005 . “Influence of Viscoelasticity on the Tribological Behaviour of Carbon Black Filled Nitrile Rubber (NBR) for Lip Seal Application,” . Wear , 259 : 684 – 692 .
   Web of Science ®Google Scholar
• Thominea , M. , Degrangea , J. M. , Vigiera , G. , Chazeaua , L. , Pelletiera , J. M. , Kapsab , P. , Guerbé , L. and Dudragne , G. 2007 . “Study of Relations between Viscoelasticity and Tribological Behaviour of Filled Elastomer for Lip Seal Application,” . Tribology International , 40 : 405 – 411 .
   Google Scholar
• Lee , C.-Y. , Lin , C.-S. , Jian , R.-Q. and Wen , C.-Y. 2006 . “Simulation and Experimentation on the Contact Width and Pressure Distribution of Lip Seals,” . Tribology International , 39 : 915 – 920 .
   Web of Science ®Google Scholar
• Shen , D. and Salant , R. F. 2007 . “An Unsteady Mixed Soft EHL Model, with Application to a Rotary Lip Seal,” . Tribology International , 40 : 646 – 651 .
   Web of Science ®Google Scholar
• Tuszynski , W. , Michalczewski , R. , Piekoszewski , W. and Szczerek , M. 2008 . “Effect of Aging Automotive Gear Oils on Scuffing and Pitting,” . Tribology International , 41 : 875 – 888 .
   Google Scholar
• Schutz , D. , Klatschke , H. and Heuler , P. 1990 . “Standardized Load Sequences for Car Wheel Suspension Components,” . LBF-Reports FB-191.
   Google Scholar
• Thomas , A. D. H. , Gravies , T. and Luxmoore , A. R. 1991 . “Computer Image Analysis for Identification of Wear Particles,” . Wear , 142 : 213 – 226 .
   Web of Science ®Google Scholar
• Sefert , W. W. and Westcott , V. C. 1972 . “A Method of the Study of Wear Particles in Lubricating Oil,” . Wear , 21 : 27 – 42 .
   Google Scholar
• Uedelhoven , W. , Franzl , M. and Guttenberger , J. 1991 . “The Use of Automated Image Analysis for the Study of Wear Particles in Oil Lubricated Tribological Systems,” . Wear , 142 : 107 – 113 .
   Google Scholar
• Ayala , H. M. , Hart , D. P. , Yeh , O. C. and Boyce , M. C. 1998 . “Wear of Elastomeric Seals in Abrasive Slurries,” . Wear , 220 : 9 – 21 .
   Web of Science ®Google Scholar
• Pei , Y. T. , Bui , X. L. , Zhou , X. B. and De Hosson , J. Th. M. 2008 . “Tribological Behavior of W-DLC Coated Rubber Seals,” . Surface and Coatings Technology , 202 : 1869 – 1875 .
   Web of Science ®Google Scholar
• Cho , C. W. and Lee , Y. Z. 2003 . “Effects of Oxide Layer on the Friction Characteristics between TiN Coated Ball and Steel Disk in Dry Sliding,” . Wear , 254 : 383 – 390 .
   Web of Science ®Google Scholar
• Fukahori , Y. and Yamazaki , H. 1994 . “Abrasion Pattern Formation in Natural Rubber Vulcanizate,” . Wear , 171 : 195 – 202 .
   Web of Science ®Google Scholar
• Fukahori , Y. and Yamazaki , H. 1995 . “General Rule in Abrasion Pattern Formation in Rubber Like Materials,” . Wear , 178 : 109 – 116 .
   Web of Science ®Google Scholar
• Lim , M. K. , Oh , S. D. and Lee , Y. Z. 2003 . “Friction and Wear of Inconel 690 and Inconel 600 for Steam Generator Tube in Room Temperature Water,” . Nuclear Engineering and Design , 226 : 97 – 105 .
   Web of Science ®Google Scholar
• Jeong , S. H. , Park , C. Y. and Lee , Y. Z. 2005 . “Fretting Wear Characteristics of Inconel 690 and Inconel 600 in Water Environment,” . Key Engineering Materials , 297–300 : 1412 – 1417 .
   Google Scholar
• Sin , H. , Saka , N. and Suh , N. P. 1978 . “Abrasive Wear Mechanisms and the Grit Size Effect,” . Wear , 55 : 163 – 190 .
   Google Scholar
• Wirojanupatump , S. and Shipway , P. H. 2000 . “Abrasion of Mild Steel in Wet and Dry Conditions with the Rubber and Steel Wheel Abrasion Apparatus,” . Wear , 239 : 91 – 101 .
   Google Scholar
• Kim , I. Y. , Lee , J. H. , Lee , G. S. , Baik , S. H. , Kim , Y. J. and Lee , Y. Z. 2009 . “Friction and Wear Characteristics of the Carbon Nanotube–Aluminum Composites with Different Manufacturing Conditions,” . Wear , 267 : 593 – 598 .
   Web of Science ®Google Scholar