On the Effect of Isotropic Hardening on the Coefficient of Restitution for Single or Repeated Impacts Using a Semi-Analytical Method

REFERENCES

• Baskaran , B. , Srinivasan , S. M. and Maffeo , B. 2010 . “Optimization of the Fatigue Strength of Materials due to Shot Peening: A Survey” . International Journal of Structural Changes in Solids , 2 : 33 – 63 .
   Google Scholar
• Pile , C. , Francois , M. , Restraint , D. , Rouhaud , E. and Lu , J. 2005 . “Modelling of the Ultrasonic Shot Peening Process” . Materials Science Forum , 490–491 : 67 – 72 .
   Google Scholar
• Cochennec , F. , Rouhaud , E. , Restraint , D. , Rouquette , S. and Roos , A. 2006 . “Analysis of the Impact of a Shot at Low Velocity Using the Finite Element Method. Application to the Ultrasonic Shot-Peening Process” . Materials Science Forum , 524–525 : 337 – 342 .
   Google Scholar
• Chao , K. K. and Saba , C. S. 2009 . “Pretreatment of Steel Racetracks by Using Sand-Blasting Technique with a Special Emphasis on Si3N4 Powder—Part Two” . Tribology Transactions , 52 ( 5 ) : 632 – 642 .
   Web of Science ®Google Scholar
• Assadi , H. , Gartner , F. , Stoltenhoff , T. and Kreye , H. 2003 . “Bonding Mechanism in Cold Gas Spraying” . Acta Materiala , 51 : 4379 – 4394 .
   Web of Science ®Google Scholar
• Katta , R. R. , Polycarpou , A. A. , Hanchi , J. V. and Roy , M. 2009 . “Analytical and Experimental Elastic–Plastic Impact Analysis of a Magnetic Storage Head–Disk Interface” . Journal of Tribology , 131 : 011902–1 – 011902–10 .
   Web of Science ®Google Scholar
• Katta , R. R. and Polycarpou , A. A. 2010 . “Impact of a Fixed-Length Rigid Cylinder on an Elastic-Plastic Homogeneous Body” . Journal of Tribology , 132 : 041402–1 – 041402–11 .
   Web of Science ®Google Scholar
• Sochting , S. , Sherrington , I. , Lewis , S. and Roberts , E. W. 2006 . “An Evaluation of the Effect of Simulated Launch Vibrations on the Friction Performance and Lubrication of Ball Bearings for Space Applications” . Wear , 260 : 1190 – 1202 .
   Web of Science ®Google Scholar
• Johnson , K. L. 1985 . Contact Mechanics , Cambridge, UK : Press Syndicate of the University of Cambridge .
   Google Scholar
• Yang , J. and Komvopoulos , K. 2005 . “Impact of a Rigid Spehre on an Elastic Homogeneous Half-Space” . Journal of Tribology , 127 : 325 – 330 .
   Web of Science ®Google Scholar
• Thornton , C. 1997 . “Coefficient of Restitution for Collinear Collisions of Elastic–Perfectly Plastic Spheres” . Journal of Applied Mechanics , 64 : 383 – 386 .
   Web of Science ®Google Scholar
• Vu-Quoc , L. and Zhang , X. 1999 . “An Elastoplastic Contact Force-Displacement Model in the Normal Direction: Displacement-Driven Version” . Proceding of the Royal Society of London A , 455 : 4013 – 4044 .
   Web of Science ®Google Scholar
• Zhang , X. and Vu-Quoc , L. 2002 . “Modeling the Dependence of the Coefficient of Restitution on the Impact Velocity in Elasto-Plastic Collisions” . International Journal of Impact Engineering , 27 : 317 – 341 .
   Web of Science ®Google Scholar
• Jackson , R. L. and Green , I.B. M. D. 2010 . “Predicting the Coefficient of Restitution of Impacting Elastic-Perfectly Plastic Spheres” . Nonlinear Dynamics , 60 : 217 – 229 .
   Web of Science ®Google Scholar
• Kogut , I. and Etsion , I. 2002 . “Elastic-Plastic Contact Analysis of a Sphere and a Rigid Flat” . Journal of Applied Mechanics , 69 : 657 – 662 .
   Web of Science ®Google Scholar
• Weir , G. and Tallon , S. 2005 . “The Coefficient of Restitution for Normal Incident, Low Velocity Particle Impacts” . Chemical Engineering Science , 60 : 3637 – 3647 .
   Web of Science ®Google Scholar
• Seifried , R. , Schiehlen , W. and Eberhard , P. 2005 . “Numerical and Experimental Evaluation of the Coefficient of Restitution for Repeated Impacts” . International Journal of Impact Engineering , 32 : 508 – 524 .
   Web of Science ®Google Scholar
• Seifried , R. , Minamoto , H. and Eberhard , P. 2010 . “Viscoplastic Effects Occuring in Impact of Aluminium and Steel Bodies and Their Influence on the Coefficient of Restitution” . Journal of Applied Mechanics , 77 : 041008–1 – 041008–7 .
   Web of Science ®Google Scholar
• Minamoto , H. , Seifried , R. , Eberhard , P. and Kawamura , S. 2010 . “Analysis of Repeated Impacts on a Steel Rod with Visco-Plastic Material Behavior” . European Journal of Mechanics/A Solids , 30 ( 3 ) : 336 – 344 .
   Web of Science ®Google Scholar
• Minamoto , H. and Kawamura , S. 2011 . “Moderately High Speed Impact of Two Identical Spheres” . International Journal of Impact Engineering , 38 : 123 – 129 .
   Web of Science ®Google Scholar
• Li , L.-Y. , Wu , C.-Y. and Thornton , C. 2002 . “A Theoretical Model for the Contact of Elastoplastic Bodies” . Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science , 216 : 421 – 431 .
   Web of Science ®Google Scholar
• Wu , C. , Li , L. and Thornton , C. 2005 . “Energy Dissipation During Normal Impact of Elastic and Elastic–Plastic Spheres” . International Journal of Impact Engineering , 32 : 593 – 604 .
   Web of Science ®Google Scholar
• Li , F. , Pan , J. and Sinka , C. 2009 . “Contact Laws Between Solid Particles” . Journal of the Mechanics and Physics of Solids , 57 : 1194 – 1208 .
   Web of Science ®Google Scholar
• Jacq , C. , Nélias , D. , Lormand , G. and Girodin , D. 2002 . “Development of a Three-Dimensional Semi-Analytical Elastic–Plastic Contact Code” . Journal of Tribology , 124 : 653 – 667 .
   Web of Science ®Google Scholar
• Boucly , V. , Nélias , D. , Liu , S. , Wang , Q. J. and Keer , L. M. 2005 . “Contact Analyses for Bodies with Frictional Heating and Plastic Behavior” . Journal of Tribology , 127 : 355 – 364 .
   Web of Science ®Google Scholar
• Liu , S. , Wang , Q. and Liu , G. 2000 . “A Versatile Method of Discrete Convolution and FFT, (DC-FFT) for Contact Analyses” . Wear , 243 : 101 – 111 .
   Web of Science ®Google Scholar
• Liu , S. , Chen , W. , Hua , D. and Wang , Q. 2007 . “Tribological Modeling: Application of Fast Fourier Transform” . Tribology International , 40 : 1284 – 1293 .
   Web of Science ®Google Scholar
• Chen , W. , Liu , S. and Wang , Q. 2008 . “FFT-Based Numerical Methods for Elasto-Plastic Contacts of Nominally Flat Surfaces” . ASME Journal of Applied Mechanics , 75 : 011022–1 – 011022–11 .
   Web of Science ®Google Scholar
• Nélias , D. , Boucly , V. and Brunet , M. 2006 . “Elastic-Plastic Contact Between Rough Surfaces: Proposal for a Wear or Running-In Model” . ASME Journal of Tribology , 128 ( 2 ) : 476 – 485 .
   Web of Science ®Google Scholar
• Nélias , D. , Antaluca , E. , Boucly , V. and Cretu , V. 2007 . “A 3D Semi-Analytical Model for Elastic–Plastic Sliding Contacts” . ASME Journal of Tribology , 129 ( 4 ) : 761 – 771 .
   Web of Science ®Google Scholar
• Nélias , D. , Antaluca , E. and Boucly , V. 2007 . “Rolling of an Elastic Ellipsoid upon an Elastic–Plastic Flat” . ASME Journal of Tribology , 129 ( 4 ) : 791 – 800 .
   Web of Science ®Google Scholar
• Chen , W. , Wang , Q. , Wang , F. , Keer , L. and Cao , J. 2008 . “Three-Dimensional Repeated Elasto-Plastic Point Contact, Rolling and Sliding” . ASME Journal of Applied Mechanics , 75 : 021021–1 – 021021–12 .
   Web of Science ®Google Scholar
• Chen , W. and Wang , Q. J. 2008 . “Thermomechanical Analysis of Elasto-Plastic Bodies in a Sliding Spherical Contact and the Effects of Sliding Speed, Heat Partition, and Thermal Softening” . ASME Journal of Tribology , 130 : 041402–1 – 041402–10 .
   Web of Science ®Google Scholar
• Chen , W. , Wang , Q. , Liu , Y. , Chen , W. , Cao , J. , Xia , C. , Talwar , R. and Lederich , R. 2007 . “Analysis and Convenient Formulas for Elasto-Plastic Contacts of Nominally Flat Surfaces: Average Gap, Contact Area Ratio, and Plastically Deformed Volume” . Tribology Letters , 28 : 27 – 38 .
   Web of Science ®Google Scholar
• Chen , W. and Wang , Q. 2009 . “A Numerical Static Friction Model for Spherical Contacts of Rough Surfaces, Influence of Load, Material, and Roughness” . ASME Journal of Tribology , 131 : 021402–1 – 021402–8 .
   Web of Science ®Google Scholar
• Wang , Z. , Wang , W. , Hu , Y. and Wang , H. 2010 . “A Numerical Elastic-Plastic Contact Model for Rough Surfaces” . Tribology Transactions , 53 ( 2 ) : 224 – 238 .
   Web of Science ®Google Scholar
• Gallego , L. , Nélias , D. and Deyber , S. 2010 . “A Fast and Efficient Contact Algorithm for Fretting Problems Applied to Fretting Modes I, II and III” . Wear , 268 : 202 – 222 .
   Web of Science ®Google Scholar
• Gallego , L. and Nélias , D. 2007 . “Modeling of Fretting Wear Under Gross Slip and Partial Slip Conditions” . ASME Journal of Tribology , 129 ( 3 ) : 528 – 535 .
   Web of Science ®Google Scholar
• Zhou , K. , Wayne Chen , W. , Keer , L. M. and Wang , Q. J. 2009 . “A Fast Method for Solving Three-Dimensional Arbitrarily-Shaped Inclusions in a Half Space” . Computer Methods in Applied Mechanics and Engineering , 198 : 885 – 892 .
   Web of Science ®Google Scholar
• Ray , S. and Chowdhury , S. 2010 . “An Analysis of Surface Temperature Rise at the Contact between Sliding Bodies with Small-Scale Surface Roughness” . Tribology Transactions , 53 ( 4 ) : 491 – 501 .
   Web of Science ®Google Scholar
• Jackson , R. L. 2010 . “An Analytical Solution to an Archard-Type Fractal Rough Surface Contact Model” . Tribology Transactions , 53 ( 4 ) : 543 – 553 .
   Web of Science ®Google Scholar
• Boussinesq , J. 1885 . Application des potentiels à l'étude de l'équilibre et du mouvement des solides élastiques , Paris : Gauthiers-Villars .
   Google Scholar
• Love , A. E. H. 1952 . A Treatise on the Mathematical Theory of Elasticity, 4th ed. , London : Cambridge University Press .
   Google Scholar
• Polonsky , I. and Keer , L. 1999 . “A Numerical Method for Solving Rough Contact Problems Based on the Multi-Level Multi-Summation and Conjugate Gradient Techniques” . Wear , 231 : 206 – 219 .
   Web of Science ®Google Scholar
• Fulleringer , B. and Nelias , D. 2010 . “On the Tangential Displacement of a Surface Point Due to a Cuboid of Uniform Plastic Strain in a Half-Space” . Journal of Applied Mechanics - Transactions of the ASME , 77 ( 2 ) : 021014
   Web of Science ®Google Scholar
• Simo , J. and Taylor , R. L. 1985 . “Consistent Tangent Operator for Rate-Independant Elastoplasticity” . Computer Methods in Applied Mechanics and Engineering , 48 : 101 – 118 .
   Web of Science ®Google Scholar
• Fotiu , P. and Nemat-Nasser , S. 1996 . “A Universal Integration Algorithm for Rate-Dependant Elastoplasticity” . Computers and Structure , 59 : 1173 – 1184 .
   Web of Science ®Google Scholar
• Chiu , Y. 1977 . “On the Stress Field due to Initial Strains in a Cuboid Surrounded by an Infinite Elastic Space” . ASME Journal of Applied Mechanics , 44 : 587 – 590 .
   Web of Science ®Google Scholar
• Chiu , Y. 1978 . “On the Stress Field and Surface Deformation in a Half Space with a Cuboidal Zone in Which Initial Strains are Uniform” . ASME Journal of Applied Mechanics , 45 : 302 – 306 .
   Web of Science ®Google Scholar
• Davies , R. 1948 . “The Determination of Static and Dynamic Yield Stresses Using a Steel Ball” . Proceedings of the Royal Society of London , 197 : 416 – 432 .
   Google Scholar
• Thornton , C. and Ning , Z. 1998 . “A Theoretical Model for the Stick/Bounce Behaviour of Adhesive, Elastic-Plastic Spheres” . Powder Technology , 99 : 154 – 162 .
   Web of Science ®Google Scholar
• Etsion , I. , Kligerman , Y. and Kadin , Y. 2005 . “Unloading of an Elastic–Plastic Loaded Spherical Contact” . International Journal of Solids and Structures , 42 ( 13 ) : 3716 – 3729 .
   Web of Science ®Google Scholar
• Wu , C.-Y. , Li , L.-Y. and Thornton , C. 2003 . “Rebound Behaviour of Spheres for Plastic Impacts” . International Journal of Impact Engineering , 28 : 929 – 946 .
   Web of Science ®Google Scholar