REFERENCES
- Fernandez, J.E., Rodriguez, R., Wang, Y., Vijande, R., and Rincon, A. (1995), “Sliding Wear of a Plasma Sprayed Al2O3 Coating,” Wear, 181–183, pp 417–425.
- Matejka, D. and Benko, B. (1989), Plasma Spraying of Metallic and Ceramic Materials, John Wiley: New York.
- Mishra, S.C., Rout, K.C., Padmanabhan, P.V. A., and Mills, B. (2000), “Plasma Spray Coating of Fly Ash Pre-Mixed with Aluminium Powder Deposited on Metal Substrates,” Journal of Materials Processing Technology, 102, pp 9–13.
- Mantry, S., Behera, D., Mishra, S.K., Debasish, D., Jha, B.B., and Mishra, B.K. (2013), “Erosive Wear Analysis of Plasma Sprayed Cu Slag-Al Composite Coatings,” Tribology Transactions, 56, pp 196–202.
- Sahu, S.P., Satapathy, A., Mishra, D., Patnaik, A., and Sreekumar, K.P. (2010), “Tribo-Performance Analysis of Fly Ash–Aluminum Coatings Using Experimental Design and ANN,” Tribology Transactions, 53, pp 533–542.
- Wang, L., Wang, Y., Sun, X.G., He, J.Q., Pan, Z.Y., and Wang, C.H. (2012), “Microstructure and Indentation Mechanical Properties of Plasma Sprayed Nano-Bimodal and Conventional ZrO2e8wt%Y2O3 Thermal Barrier Coatings,” Vacuum, 86, pp 1174–1185.
- Huang, W., Fan, X., Zhao, Y., Zhou, X., Meng, X., Wang, Y., Zou, B., Cao, X., and Wang, Z. (2012), “Fabrication of Thermal Barrier Coatings onto Polyimide Matrix Composites Via Air Plasma Spray Process,” Surface and Coatings Technology, 207, pp 421–429.
- Jamalin, H., Mozafarinia, R., Razavi, R.S., and Pidani, R.. (2012), “Comparison of Thermal Shock Resistances of Plasma-Sprayed Nanostructured and Conventional Yttria Stabilized Zirconia Thermal Barrier Coatings,” Ceramics International, 38, pp 6705–6712.
- Baia, Y., Tang, J.J., Qu, Y.M., Ma, S.Q., Ding, C.H., Yang, J.F., Yu, L., and Han, Z.H. (2013), “Influence of Original Powders on the Microstructure and Properties of Thermal Barrier Coatings Deposited by Supersonic Atmospheric Plasma Spraying, Part I: Microstructure,” Ceramics International, 39, pp 5113–5124.
- Yugeswaran, S., Kobayashi, A., and Ananthapadmanabhan, P.V. (2012), “Hot Corrosion Behaviors of Gas Tunnel Type Plasma Sprayed La2Zr2O7 Thermal Barrier Coatings,” Journal of the European Ceramic Society, 32, pp 823–834.
- Heimann, R.B. and Lehmann, H.D. (2008), “Recently Patented Work on Thermally Sprayed Coatings for Protection against Wear and Corrosion of Engineered Structures,” Recent Patents on Materials Science, 1, pp 41–55.
- Tilly, G.P. (1979), “Erosion Caused by Impact of Solid Particles,” Treatise on Materials Science and Technology, Vol. 13, Wear, Scott, D. (Ed.), pp 287–320. Academic Press: New York.
- Ercenk, E., Sen, U., and Yilmaz, S. (2012), “The Erosive Wear Behavior of Basalt Based Glass and Glass–Ceramic Coatings,” Tribology International, 52, pp 94–100.
- Arnold, J.C. and Hutchings, I.M. (1990), “The Mechanisms of Erosion of Unfilled Elastomers by Solid Particle Impact,” Wear, 13, pp 33–36.
- Arnold, J.C. and Hutchings, I.M. (1989), “Flux Rate Effects in the Erosive Wear of Elastomers,” Journal of Materials Science, 24, pp 833–839.
- Friedrich, K. (1986), “Erosive Wear of Polymer Surfaces by Steel Ball Blasting,” Journal of Materials Science, 21, pp 3317–3332.
- Zahavi, J. (1981), “Solid Particle Erosion of Polymeric Coatings,” Wear, 71, pp 191–210.
- Williams, J.H. , Jr. and Lau, K.E. (1974), “Solid Particle Erosion of Graphite Epoxy Composites,” Wear, 29, pp 219–230.
- Roberto, J., Branco, T., Gansert, R., Sampath, S., Berndt, C.C., and Herman, H. (2004), “Solid Particle Erosion of Plasma Sprayed Ceramic Coatings,” Materials Research, 7(1), pp 147–153.
- Mishra, S.C., Das, S., Satapathy, A., Ananthapadmanabhan, P.V., and Sreekumar, K.P. (2009), “Erosion Wear Analysis of Plasma Sprayed Ceramic Coating Using the Taguchi Technique,” Tribology Transactions, 52, pp 401–404.
- Sahu, S.P., Satapathy, A., and Mishra, D. (2010), “Development of Protective Coatings Using Fly Ash Premixed with Metal Powder on Aluminium Substrates,” Journal of Solid Waste Technology and Management, 28(7), pp 660–666.
- Sahu, S.P. (2010), A Study on Solid Particle Erosion Wear Response of Plasma Sprayed Fly Ash Coatings, Ph.D. Thesis, Sambalpur University: Burla, India.
- Sahin, Y. (2005), “The Prediction of Wear Resistance Model for the Metal Matrix Composites,” Wear, 258 (11–12), pp 1717–1722.
- Taguchi, G. (1990), Introduction to Quality Engineering, Asian Productivity Organization: Tokyo.
- Yang, W.H. and Tarn, Y.S. (1998), “Design Optimization of Cutting Parameters for Turning Operations Based on the Taguchi Method,” Journal of Materials Processing Technology, 84, pp 121–129.
- Phadke, M.S. (1989), Quality Engineering Using Robust Design, Prentice-Hall International Editions: Englewood Cliffs, NJ.
- Padhi, P.K. and Satapathy, A. (2013), “Analysis of Sliding Wear Characteristics of BFS Filled Composites Using an Experimental Design Approach Integrated with ANN,” Tribology Transactions, 56, pp 786–796.
- Biswas, B. and Satapathy, A. (2010), “A Study on Tribological Behavior of Alumina Filled Glass–Epoxy Composites Using Taguchi Experimental Design,” Tribology Transactions, 53, pp 520–532.
- Zeng, P. (1998), “Neural Computing in Mechanics,” Applied Mechanics, 51(2), pp 173–197.
- Zhang, Z. and Friedrich, K. (2003), “Artificial Neural Networks Applied to Polymer Composites—A Review,” Composites Science and Technology, 63(14), pp 2029–2044.
- Kadi, H.E. (2006), “Modeling the Mechanical Behavior of Fiber-Reinforced Polymeric Composite Materials Using Artificial Neural Networks—A Review,” Composite Structures, 73(1), pp 1–23.
- Aglan, H.A. and Chenock, T.A. , Jr. (1993), “Erosion Damage Features of Polyimide Thermoset Composites,” SAMPEQ, 24(2), pp 41–47.
- Haykin, S. (1999), Neural Networks: A Comprehensive Foundation, Prentice Hall: Upper Saddle River, NJ.
- Rajasekaran, S. and Vijayalakshmi Pai, G.A. (2003), Neural Networks, Fuzzy Logic and Genetic Algorithms—Synthesis and Applications, Prentice Hall of India: New Delhi.
- Lima, C.R. C. and Trevisan, R.E. (1997), “Graded Plasma Spraying of Premixed Metal–Ceramic Powders on Metallic Substrates,” Journal of Thermal Spray Technology, 6(2), pp 199–204.
- Satapathy A. (2006), Thermal Spray Coating of Red Mud on Metals, Ph.D. Thesis, NIT: Rourkela, India.
- Satapathy, A., Mishra, S.C., Ananthapadmanabhan, P.V., and Sreekumar, K.P. (2007), “Development of Ceramic Coatings Using Red Mud: A Solid Waste of Alumina Plants,” Journal of Solid Waste Technology and Management, 33, pp 48–53.
- Sahu, S.P., Satapathy, A., Patnaik, A., Sreekumar, K.P., and Ananthapadmanabhan, P.V. (2010), “Development, Characterization and Erosion Wear Response of Plasma Sprayed Fly Ash–Aluminum Coatings,” Materials & Design, 31, pp 1165–1173.
- Lindsley, B.A. and Marder, A.R. (1999), “The Effect of Velocity on the Solid Particle Erosion Rate of Alloys,” Wear, 225–229, pp 510–516.
- Chen, Q. and Li, D.Y. (2003), “Computer Simulation of Solid Particle Erosion,” Wear, 254(3–4), pp 203–210.
- Rajesh, J., John, J., Bijwe, B., Venkataraman, B., and Tewari, U.S. (2004), “Effect of Impingement Velocity on the Erosion Wear Behavior of Polyamides,” Tribology International, 37(3), pp 219–226.
- Lopez, D., Congote, J.P., Cano, J.R., Toro, A., and Tschiptschin, A.P. (2005), “Effect of Particle Velocity and Impact Angle on the Corrosion–Erosion of AISI 304 and AISI 420 Stainless Steel,” Wear, 259(1–6), pp 118–124.