Different Approaches to the Investigation and Testing of the Ni-Based Self-Fluxing Alloy Coatings—A Review. Part 1: General Facts, Wear and Corrosion Investigations

REFERENCES

• Bhushan, B. and Gupta, B.K. (1991), Handbook of Tribology: Materials, Coatings and Surface Treatments, McGraw-Hill: New York.
   Google Scholar
• Davis, J.R. (2004), Handbook of Thermal Spray Technology, ASM International: Materials Park, OH.
   Google Scholar
• Davis, J.R. (2001), Surface Engineering for Corrosion and Wear Resistance, ASM International: Materials Park, OH.
   Google Scholar
• Knotek, O. (2001), “Thermal Spraying and Detonation Gun Processes,” Handbook of Hard Coatings, pp 77–107, Bunshah, R.F. (Ed.), Noyes Publications/William Andrew Publishing, LLC: New York.
   Google Scholar
• Bunshah, R.F. (1994), “Deposition Technologies: An Overview,” Handbook of Deposition Technologies for Films and Coatings, pp 27–54, Bunshah, R.F. (Ed.), Noyes Publications: Park Ridge, NJ.
   Google Scholar
• Simunovic, K. (2010), “Thermal Spraying,” Encyclopedia of Life Support Systems, Welding Engineering and Technology, Kralj, S. (Ed.), developed under the Auspices of the UNESCO, EOLSS Publishers: Oxford. Available at http://www.eolss.net/ebooklib/ViewEbookList.aspx?catid=5 (accessed January 2014).
   Google Scholar
• Hermanek, F.J. (2002), “Thermal Spraying: What It Was and What It Has Become,” International Journal of Powder Metallurgy, 38(7), pp 35–44.
   Web of Science ®Google Scholar
• Tucker, R.C. (2002), “Thermal Spray Coatings: Broad and Growing Applications,” International Journal of Powder Metallurgy, 38(7), pp 45–53.
   Web of Science ®Google Scholar
• Pawlowski, L. (1999), “Thick Laser Coatings: A Review,” Journal of Thermal Spray Technology, 8(2), pp 279–295.
   Web of Science ®Google Scholar
• Fauchais, P., Vardelle, A., and Dussoubs, B. (2001), “Quo Vadis Thermal Spraying?” Journal of Thermal Spray Technology, 10(1), pp 44–66.
   Web of Science ®Google Scholar
• Fauchais, P., Montavon, G., and Bertrand, G. (2010), “From Powders to Thermally Sprayed Coatings,” Journal of Thermal Spray Technology, 19(1–2), pp 56–80.
   Web of Science ®Google Scholar
• Sidhu, T.S., Prakash, S., and Agrawal, R.D. (2005), “Studies on the Properties of High-Velocity Oxy-Fuel Thermal Spray Coatings for Higher Temperature Applications,” Materials Science, 41(6), pp 805–823 (Published in Fizyko-Khimichna Mekhanika Materialiv, 2005, 41(6), pp 80–95).
   Web of Science ®Google Scholar
• Li, J. and Wang, X. (2013), “Numerical Simulation of the Influence of the Bulges around Laser Surface Textures on the Tribological Performance,” Tribology Transactions, 56(6), pp 1011–1018.
   Web of Science ®Google Scholar
• EN 657. (1994), Thermal Spraying—Terminology, Classification, European Committee for Standardization: Brussels, Belgium.
   Google Scholar
• Ivusic, V. (2002), Tribologija [Tribology], Hrvatsko Drustvo za Materijale i Tribologiju [Croatian Society for Materials and Tribology]: Zagreb, Croatia.
   Google Scholar
• Marusic, V. (2008), Tribologija u Teoriji i Praksi [Tribology in Theory and Practice], Strojarski Fakultet u Slavonskom Brodu [Mechanical Engineering Faculty in Slavonski Brod]: Slavonski Brod, Croatia.
   Google Scholar
• Axen, N., Hogmark, S., and Jacobson, S. (2001), “Friction and Wear Measurement Techniques,” Modern Tribology Handbook, Vol. 1, Bhushan, B. (Ed.), CRC Press: Boca Raton, FL.
   Google Scholar
• Holmberg, K. and Matthews, A. (2001), “Tribological Properties of Metallic and Ceramic Coatings,” Modern Tribology Handbook, Vol. 2, Bhushan, B. (Ed.), CRC Press, Boca Raton, FL.
   Google Scholar
• Hogmark, S., Jacobson, S., Larsson, M., and Wiklund, U. (2001), “Mechanical and Tribological Requirements and Evaluation of Coating Composites,” Modern Tribology Handbook, Vol. 2, Bhushan, B. (Ed.), CRC Press, Boca Raton, FL.
   Google Scholar
• Serres, N., Hlawka, F., Costil, S., Langlade, C., and Machi, F. (2011), “Microstructures and Mechanical Properties of Metallic NiCrBSi and Composite NiCrBSi-WC Layers Manufactured via Hybrid Plasma/Laser Process,” Applied Surface Science, 257(12), pp 5132–5137.
   Web of Science ®Google Scholar
• Guilemany, J.M., Nin, J., Lorenzana, C., Miguel, J.M., and Miguel, J.R. (2004), “Tribologia de Recubrimientos Cermet/NiCrBSi Depositados Mediante HVOF” [Tribology of Cermet/NiCrBSi Coatings Sprayed by HVOF], Boletin de la Sociedad Espanola de Ceramica y Vidrio, 43(2), pp 483–487.
   Web of Science ®Google Scholar
• Tu, S.Y., Jean, M.D., Wang, J.T., and Wu, C.S. (2006), “A Robust Design in Hardfacing Using a Plasma Transfer Arc,” International Journal of Advanced Manufacturing Technology, 27(9–10), pp 889–896.
   Web of Science ®Google Scholar
• Parthasarathi, N.L. and Duraiselvam, M. (2010), “High Temperature Tribological Properties of NiCrBSiCFe Plasma-Sprayed Coating on Austenitic Stainless Steel Substrate,” Journal of Alloys and Compounds, 505(2), pp 824–831.
   Web of Science ®Google Scholar
• Wong, T.T., Liang, G.Y., He, B.L., and Woo, C.H. (2000), “Wear Resistance of Laser-Clad Ni-Cr-B-Si Alloy on Aluminium Alloy,” Journal of Materials Processing Technology, 100(1–3), pp 142–146.
   Web of Science ®Google Scholar
• Gomez-del Rio, T., Garrido, M.A., Fernandez, J.E., Cadenas, M., and Rodriguez, J. (2008), “Influence of the Deposition Techniques on the Mechanical Properties and Microstructure of NiCrBSi Coatings,” Journal of Materials Processing Technology, 204(1–3), pp 304–312.
   Web of Science ®Google Scholar
• Serres, N., Hlawka, F., Costil, S., Langlade, C., Machi, F., and Cornet, A. (2010), “Combined Plasma Spray and In Situ Laser Melting Treatment of NiCrBSi Powder,” Journal of Optoelectronics and Advanced Materials, 12(3), pp 505–510.
   Web of Science ®Google Scholar
• Guilemany, J.M., Miguel, J.M., Armada, S., Vizcaino, S., and Climent, F. (2001), “Use of Scanning White Light Interferometry in the Characterization of Wear Mechanisms in Thermal-Sprayed Coatings,” Materials Characterization, 47(3–4), pp 307–314.
   Web of Science ®Google Scholar
• Liu, S., Zheng, X., and Geng, G. (2010), “Dry Sliding Wear Behavior and Corrosion Resistance of NiCrBSi Coating Deposited by Activated Combustion–High Velocity Air Fuel Spray Process,” Materials & Design, 31(2), pp 913–917.
   Web of Science ®Google Scholar
• Parthasarathi, N.L., Duraiselvam, M., and Borah, U. (2012), “Effect of Plasma Spraying Parameter on Wear Resistance of NiCrBSiCFe Plasma Coatings on Austenitic Stainless Steel at Elevated Temperatures at Various Loads,” Materials & Design, 36, pp 141–151.
   Web of Science ®Google Scholar
• Sun, R.L., Yang, D.Z., Guo, L.X., and Dong, S.L. (2000), “Microstructure and Wear Resistance of NiCrBSi Laser Clad Layer on Titanium Alloy Substrate,” Surface and Coatings Technology, 132(2–3), pp 251–255.
   Web of Science ®Google Scholar
• Kim, H.-J., Hwang, S.-Y., Lee, C.-H., and Juvanon, P. (2003), “Assessment of Wear Performance of Flame Sprayed and Fused Ni-Based Coatings,” Surface and Coatings Technology, 172(2–3), pp 262–269.
   Web of Science ®Google Scholar
• Sun, R.L., Lei, Y.W., and Niu, W. (2009), “Laser Clad TiC Reinforced NiCrBSi Composite Coatings on Ti-6Al-4V Alloy Using a CW CO2 Laser,” Surface and Coatings Technology, 203(10–11), pp 1395–1399.
   Web of Science ®Google Scholar
• Serres, N., Hlawka, F., Costil, S., Langlade, C., Machi, F., and Cornet, A. (2009), “Dry Coatings and Ecodesign. Part. 2—Tribological Performances,” Surface and Coatings Technology, 204(1–2), pp 197–204.
   Web of Science ®Google Scholar
• Guo, C., Zhou, J.S., Chen, J.M., Zhao, J.R., Yu, Y.J., and Zhou, H.D. (2010), “Improvement of the Oxidation and Wear Resistance of Pure Ti by Laser Cladding at Elevated Temperature,” Surface and Coatings Technology, 205(7), pp 2142–2151.
   Web of Science ®Google Scholar
• Serres, N., Portha, N., and Machi, F. (2011), “Influence of Salt Fog Aging Tests on Mechanical Resistance of Laser Clad-Coatings,” Surface and Coatings Technology, 205(23–24), pp 5330–5337.
   Web of Science ®Google Scholar
• Guo, C., Chen, J., Zhou, J., Zhao, J., Wang, L., Yu, Y., and Zhou, H. (2012), “Effects of WC-Ni Content on Microstructure and Wear Resistance of Laser Cladding Ni-Based Alloys Coating,” Surface and Coatings Technology, 206(8–9), pp 2064–2071.
   Web of Science ®Google Scholar
• Zorawski, W. and Skrzypek, S. (2013), “Tribological Properties of Plasma and HVOF-Sprayed NiCrBSi-Fe2O3 Composite Coatings,” Surface and Coatings Technology, 220, pp 282–289.
   Web of Science ®Google Scholar
• Cai, B., Tan, Y., Tu, Y., Wang, X., and Xu, T. (2011), “Effects of Graphite Content on Microstructure and Tribological Properties of Graphite/TiC/Ni-Base Alloy Composite Coatings,” Transactions of the Nonferrous Metals Society of China, 21(8), pp 1741–1749.
   Web of Science ®Google Scholar
• Cai, B., Tan, Y., Tu, Y., Wang, X., and Tan, H. (2011), “Tribological Properties of Ni-Base Alloy Composite Coating Modified by Both Graphite and TiC Particles,” Transactions of the Nonferrous Metals Society of China, 21(11), pp 2426–2432.
   Web of Science ®Google Scholar
• Cai, B., Tan, Y.-F., He, L., Tan, H., and Wang, X.L. (2013), “Tribological Behavior and Mechanisms of Graphite/CaF2/TiC/Ni-Base Alloy Composite Coatings,” Transactions of the Nonferrous Metals Society of China, 23(2), pp 392–399.
   Web of Science ®Google Scholar
• Cai, B., Tan, Y-F., He, L., Tan, H., and Gao, L. (2013), “Tribological Properties of TiC Particles Reinforced Ni-Based Alloy Composite Coatings,” Transactions of the Nonferrous Metals Society of China, 23(6), pp 1681–1688.
   Web of Science ®Google Scholar
• Cai, B., Tan, Y.-F., Tan, H., Jing, Q.-F., and Zhang, Z-W. (2013), “Tribological Behavior and Mechanism of NiCrBSi-Y2O3 Composite Coatings,” Transactions of the Nonferrous Metals Society of China, 23(7), pp 2002–2010.
   Web of Science ®Google Scholar
• Miguel, J.M., Guilemany, J.M., and Vizcaino, S. (2003), “Tribological Study of NiCrBSi Coating Obtained by Different Processes,” Tribology International, 36(3), pp 181–187.
   Web of Science ®Google Scholar
• Yu, H.L., Zhang, W., Wang, H.M., Guo, Y.M., Wei, M., Song, Z.Y., and Wang, Y. (2013), “Bonding and Sliding Wear Behaviors of the Plasma Sprayed NiCrBSi Coatings,” Tribology International, 66, pp 105–113.
   Web of Science ®Google Scholar
• Houdkova, S., Zahalka, F., Kasparova, M., and Berger, L.-M. (2011), “Comparative Study of Thermally Sprayed Coatings under Different Types of Wear Conditions for Hard Chromium Replacement,” Tribology Letters, 43(2), pp 139–154.
   Web of Science ®Google Scholar
• Stanford, M.K. and Jain, V.K. (2001), “Friction and Wear Characteristics of Hard Coatings,” Wear, 251(1–12), pp 990–996.
   Web of Science ®Google Scholar
• Van Acker, K., Vanhoyweghen, D., Persoons, R., and Vangrunderbeek, J. (2005), “Influence of Tungsten Carbide Particle Size and Distribution on the Wear Resistance of Laser Clad WC/Ni Coatings,” Wear, 258(1–4), pp 194–202.
   Web of Science ®Google Scholar
• Guo, C., Zhou, J., Chen, J., Zhao, J., Yu, Y., and Zhou, H. (2011), “High Temperature Wear Resistance of Laser Cladding NiCrBSi and NiCrBSi/WC-Ni Composite Coatings,” Wear, 270(7–8), pp 492–498.
   Web of Science ®Google Scholar
• Serres, N., Hlawka, F., Costil, S., Langlade, C., and Machi, F. (2011), “An Investigation of the Mechanical Properties and Wear Resistance of NiCrBSi Coatings Carried Out by in situ Laser Remelting,” Wear, 270(9–10), pp 640–649.
   Web of Science ®Google Scholar
• Kesavan, D. and Kamaraj, M. (2011), “Influence of Aging Treatment on Microstructure, Wear and Corrosion Behavior of a Nickel Base Hardfaced Coating,” Wear, 272(1), pp 7–17.
   Web of Science ®Google Scholar
• Ramachandran, C.S., Balasubramanian, V., and Varahamoorthy, R. (2010Comparative Evaluation of Dry Sliding Wear Behaviour of Plasma Transferred Arc Hardfaced Surfaces by the Pin-on-Roller Method,” Proceedings of the Institution of Mechanical Engineers Part J - Journal of Engineering Tribology, 224, pp 91–106
   Google Scholar
• Ramachandran, C.S., Balasubramanian, V., Varahamoorthy, R., and Babu, S. (2009), “Dry Sliding Wear Behaviour of Plasma Transferred Arc Hardfaced Colmonoy Surface,” Surface Engineering, 25(6), pp 440–448.
   Web of Science ®Google Scholar
• Li, Q., Song, G.M., Zhang, Y.Z., Lei, T.C., and Chen, W.Z. (2003), “Microstructure and Dry Sliding Wear Behavior of Laser Clad Ni-Based Alloy Coating with the Addition of SiC,” Wear, 254(3–4), pp 222–229.
   Web of Science ®Google Scholar
• Hejwowski, T. (2002), “Wear Resistance of Graded Coatings,” Vacuum, 65(3–4), pp 515–520.
   Web of Science ®Google Scholar
• Hejwowski, T. (2006), “Sliding Wear Resistance of Fe-, Ni- and Co-Based Alloys for Plasma Deposition,” Vacuum, 80(11–12), pp 1326–1330.
   Web of Science ®Google Scholar
• Kim, K.T. and Kim, Y.S. (2010), “Effects of Counterpart Materials on Wear Behavior of Thermally Sprayed Ni-Based Self-Flux Alloy Coatings,” International Journal of Modern Physics B, 24(15–16), pp 3023–3028.
   Web of Science ®Google Scholar
• Yin, B., Zhou, H.D., Chen, J.M., and Yan, F.Y. (2011), “Microstructure and High Temperature Sliding Wear Behaviour of Laser Remelted NiCrBSi/35(WC-12Ni) Composite Coating,” Surface Engineering, 27(6), pp 458–463.
   Web of Science ®Google Scholar
• Guo, C., Zhou, J.S., Zhao, J.R., and Chen, J.M. (2011), “Effect of ZrB2 on the Microstructure and Wear Resistance of Ni-Based Composite Coating Produced on Pure Ti by Laser Cladding,” Tribology Transactions, 54(1), pp 80–86.
   Web of Science ®Google Scholar
• Peng, L. (2013), “Preparation and Tribological Properties of NiCrBSiC Reinforced Laser Alloying Layer,” Tribology Transactions, 56(4), pp 697–702.
   Web of Science ®Google Scholar
• Devoino, O.G., Kardapolova, M.A., Laber, S., Feldstein, E.A., and Dyachenko, O.V. (2004), “Wear Resistance of Coatings from Self-Fluxing Alloys after Laser Doping under Dry Friction Conditions,” Journal of Engineering Physics and Thermophysics, 77(2), pp 372–376.
   Google Scholar
• Wang, K.L., Zhang, Q.B., Sun, M.L., Wei, X.G., and Zhu, Y.M. (2001), “Rare Earth Elements Modification of Laser-Clad Nickel-Based Alloy Coatings,” Applied Surface Science, 174(3–4), pp 191–200.
   Web of Science ®Google Scholar
• Hsieh, C.C., Chen, J.H., Huang, F.T., and Wu, W.T. (2013), “Sliding Wear Performance of Fe-, Ni- and Co-Based Hardfacing Alloys for PTA Cladding,” International Journal of Materials Research, 104(3), pp 293–300.
   Web of Science ®Google Scholar
• Xu, J.S., Zhang, X.C., Xuan, F.Z., Wang, Z.D., and Tu, S.T. (2012), “Microstructure and Sliding Wear Resistance of Laser Cladded WC/Ni Composite Coatings with Different Contents of WC Particle,” Journal of Materials Engineering and Performance, 21(9), pp 1904–1911.
   Web of Science ®Google Scholar
• Dong, G., Yan, B., Deng, Q., and Yu, T. (2012), “Microstructure and Wear Resistance of in situ NbC Particles Reinforced Ni-Based Alloy Composite Coating by Laser Cladding,” Journal of Wuhan University of Technology (Materials Science Edition), 27(2), pp 231–237.
   Web of Science ®Google Scholar
• Zhang, H., Shi, Y., Kutsuna, M., and Xu, G.J. (2010), “Laser Cladding of Colmonoy 6 Powder on AISI316L Austenitic Stainless Steel,” Nuclear Engineering and Design, 240(10), pp 2691–2696.
   Web of Science ®Google Scholar
• Abdi, S. and Lebaili, S. (2009), “Alternative to Chromium, a Hard Alloy Powder NiCrBCSi (Fe) Coatings Thermally Sprayed on 60CrMn4 Steel. Phase and Comportements,” Physics Procedia, 2(3), pp 1005–1014.
   Google Scholar
• Vijande, R., Cuetos, J.M., Cortizo, J.L., Rodriguez, E., and Noriega, A. (2009), “Desgaste Lubricado de Recubrimientos NiCrBSi Refundidos Parcialmente con Laser” [Lubricated Wear of NiCrBSi Coatings Partially Remelted with Laser], Revista de Metalurgia (Madrid), 45(2), pp 114–123.
   Web of Science ®Google Scholar
• Wang, X., Zhang, M., Zou, Z., and Qu, S. (2002), “Microstructure and Properties of Laser Clad TiC + NiCrBSi + Rare Earth Composite Coatings,” Surface and Coatings Technology, 161(2–3), pp 195–199.
   Web of Science ®Google Scholar
• Huang, Z., Hou, Q., and Wang, P. (2008), “Microstructure and Properties of Cr3C2-Modified Nickel-Based Alloy Coating Deposited by Plasma Transferred Arc Process,” Surface and Coatings Technology, 202(13), pp 2993–2999.
   Web of Science ®Google Scholar
• Sari, N.Y. and Yilmaz, M. (2008), “Improvement of Wear Resistance of Wire Drawing Rolls with Cr-Ni-B-Si + WC Thermal Spraying Powders,” Surface and Coatings Technology, 202(13), pp 3136–3141.
   Web of Science ®Google Scholar
• Peng, L. (2012), “Improvement in Microstructure Performance of the NiCrBSi Reinforced Coating on TA15 Titanium Alloy,” Surface Review Letters, 19(5), pp 1250047-1-5.
   Web of Science ®Google Scholar
• Chen, H., Xu, C., Qu, J., Hutchings, I.M., Shipway, P.H., and Liu, J. (2005), “Sliding Wear Behaviour of Laser Clad Coatings Based upon a Nickel-Based Self-Fluxing Alloy Co-Deposited with Conventional and Nanostructured Tungsten Carbide–Cobalt Hardmetals,” Wear, 259, pp 801–806.
   Web of Science ®Google Scholar
• Fernandez, E., Cadenas, M., Gonzalez, R., Navas, C., Fernandez, R., and de Damborenea, J. (2005), “Wear Behaviour of Laser Clad NiCrBSi Coating,” Wear, 259, pp 870–875.
   Web of Science ®Google Scholar
• Gonzalez, R., Cadenas, M., Fernandez, R., Cortizo, J.L., and Rodriguez, E. (2007), “Wear Behaviour of Flame Sprayed NiCrBSi Coating Remelted by Flame or by Laser,” Wear, 262(3–4), pp 301–307.
   Web of Science ®Google Scholar
• Gonzalez, R., Garcia, M.A., Penuelas, I., Cadenas, M., Fernandez, M.D., Battez, A.H., and Felgueroso, D. (2007), “Microstructural Study of NiCrBSi Coatings Obtained by Different Processes,” Wear, 263, pp 619–624.
   Web of Science ®Google Scholar
• Felgueroso, D., Vijande, R., Cuetos, J.M., Tucho, R., and Hernandez, A. (2008), “Parallel Laser Melted Tracks: Effects on the Wear Behaviour of Plasma-Sprayed Ni-Based Coatings,” Wear, 264(3–4), pp 257–263.
   Web of Science ®Google Scholar
• Chen, H., Xu, C., Chen, J., Zhao, H., Zhang, L., and Wang, Z. (2008), “Microstructure and Phase Transformation of WC/Ni60B Laser Cladding Coatings during Dry Sliding Wear,” Wear, 264(7–8), pp 487–493.
   Web of Science ®Google Scholar
• Battez, A.H., Viesca, J.L., Gonzalez, R., Blanco, D., Asedegbega, E., and Osorio, A. (2010), “Friction Reduction Properties of a CuO Nanolubricant Used as Lubricant for a NiCrBSi Coating,” Wear, 268(1–2), pp 325–328.
   Web of Science ®Google Scholar
• Garcia, A., Cadenas, M., Fernandez, M.R., and Noriega, A. (2013), “Tribological Effects of the Geometrical Properties of Plasma Spray Coatings Partially Melted by Laser,” Wear, 305(1–2), pp 1–7.
   Web of Science ®Google Scholar
• Buytoz, S., Ulutan, M., Islak, S., Kurt, B., and Nuri Celik, O. (2013), “Microstructural and Wear Characteristics of High Velocity Oxygen Fuel (HVOF) Sprayed NiCrBSi-SiC Composite Coating on SAE 1030 Steel,” Arabian Journal for Science and Engineering, 38(6), pp 1481–1491.
   Web of Science ®Google Scholar
• Zhang, Z., Wang, Z., and Liang, B. (2009), “Wear Characterization of Thermal Spray Welded Ni-Cr-B-Si-RE Alloy Coatings,” Journal of Materials Processing Technology, 209(3), pp 1368–1374.
   Web of Science ®Google Scholar
• Culliton, D., Betts, A., Carvalho, S., and Kennedy, D. (2013), “Improving Tribological Properties of Cast Al-Si Alloys through Application of Wear-Resistant Thermal Spray Coatings,” Journal of Thermal Spray Technology, 22(4), pp 491–501.
   Web of Science ®Google Scholar
• Gisario, A., Barletta, M., and Veniali, F. (2012), “Laser Surface Modification (LSM) of Thermally-Sprayed Diamalloy 2002 Coating,” Optics & Laser Technology. 44(6), pp 1942–1958.
   Web of Science ®Google Scholar
• Stoica, V., Ahmed, R., and Itsukaichi, T. (2005), “Influence of Heat-Treatment on the Sliding Wear of Thermal Spray Cermet Coatings,” Surface and Coatings Technology, 199(1), pp 7–21.
   Web of Science ®Google Scholar
• Niranatlumpong, P. and Koiprasert, H. (2010), “The Effect of Mo Content in Plasma-Sprayed Mo-NiCrBSi Coating on the Tribological Behavior,” Surface and Coatings Technology, 205(2), pp 483–489.
   Web of Science ®Google Scholar
• Niranatlumpong, P. and Koiprasert, H. (2011), “Phase Transformation of NiCrBSi-WC and NiBSi-WC Arc Sprayed Coatings,” Surface and Coatings Technology, 206(2–3), pp 440–445.
   Web of Science ®Google Scholar
• Zhang, Z., Wang, Z., and Liang, B. (2010), “Microstructure and Dry-Sliding Wear Behavior of Thermal Sprayed and Fused Ni-Based Coatings with the Addition of La2O3,” Tribology Letters, 37(2), pp 141–148.
   Web of Science ®Google Scholar
• Guo, C., Zhou, J., Zhao, J., Wang, L., Yu, Y., Chen, J., and Zhou, H. (2011), “Microstructure and Tribological Properties of a HfB2-Containing Ni-Based Composite Coating Produced on a Pure Ti Substrate by Laser Cladding,” Tribology Letters, 44(2), pp 187–200.
   Web of Science ®Google Scholar
• Martin, A., Rodriguez, J., Fernandez, J.E., and Vijande, R. (2001), “Sliding Wear Behaviour of Plasma Sprayed WC-NiCrBSi Coatings at Different Temperatures,” Wear, 251, pp 1017–1022.
   Web of Science ®Google Scholar
• Rodriguez, J., Martin, A., Fernandez, R., and Fernandez, J.E. (2003), “An Experimental Study of the Wear Performance of NiCrBSi Thermal Spray Coatings,” Wear, 255, pp 950–955.
   Web of Science ®Google Scholar
• Stoica, V., Ahmed, R., Itsukaichi, T., and Tobe, S. (2004), “Sliding Wear Evaluation of Hot Isostatically Pressed (HIPed) Thermal Spray Cermet Coatings,” Wear, 257(11), pp 1103–1124.
   Web of Science ®Google Scholar
• Zhang, Z., Wang, Z., Liang, B., Dong, H.B., and Hainsworth, S.V. (2007), “Effect of CeO2 on the Microstructure and Wear Behavior of Thermal Spray Welded NiCrWRE Coatings,” Wear, 262(5–6), pp 562–567.
   Web of Science ®Google Scholar
• Garrido, A.H., Gonzalez, R., Cadenas, M., and Battez, A.H. (2011), “Tribological Behavior of Laser-Textured NiCrBSi Coatings,” Wear, 271(5–6), pp 925–933.
   Web of Science ®Google Scholar
• Fernandes, F., Ramalho, A., Loureiro, A., Guilemany, J.M., Torrell, M., and Cavaleiro, A. (2013), “Influence of Nanostructured ZrO2 Additions on the Wear Resistance of Ni-Based Alloy Coatings Deposited by APS Process,” Wear, 303(1–2), pp 591–601.
   Web of Science ®Google Scholar
• Yu, T., Deng, Q., Dong, G., and Yang, J. (2011), “Effects of Ta on Microstructure and Microhardness of Ni Based Laser Clad Coating,” Applied Surface Science, 257(11), pp 5098–5103.
   Web of Science ®Google Scholar
• Sharma, S. (2012), “Wear Study of Ni-WC Composite Coating Modified with CeO2,” International Journal of Advanced Manufacturing Technology, 61(9–12), pp 889–900.
   Web of Science ®Google Scholar
• Sharma, S.P., Dwivedi, D.K., and Jain, P.K. (2008), “Abrasive Wear Behaviour of Continuously Compacted Thermal-Sprayed Ni Base Alloy Powder Coatings in Different Conditions,” International Journal of Surface Science and Engineering, 2(3–4), pp 240–251.
   Web of Science ®Google Scholar
• Sharma, S. (2013–2014), “Abrasive Wear Study of NiCrFeSiB Flame Sprayed Coating,” Journal of the Institution of Engineers (India): Series D, 94(2), pp 75–80.
   Google Scholar
• Reinaldo, P.R. and D’Oliveira, A.S. C. M. (2013), “NiCrSiB Coatings Deposited by Plasma Transferred Arc on Different Steel Substrates,” Journal of Materials Engineering and Performance, 22(2), pp 590–597.
   Web of Science ®Google Scholar
• Fan, X.F., Zhou, J., Qiu, C.J., He, B., Ye, J., Yuan, B., and Pi, Z. (2011), “Experimental Study on Surface Characteristics of Laser Cladding Layer Regulated by High-Frequency Microforging,” Journal of Thermal Spray Technology, 20(3), pp 456–464.
   Web of Science ®Google Scholar
• Sharma, S. (2012), “Abrasive Wear Study of Rare Earth Modified Coatings by Statistical Method,” Journal of Thermal Spray Technology, 21(5), pp 773–781.
   Web of Science ®Google Scholar
• Yu, T., Deng, Q., Dong, G., and Yang, J. (2013), “Influence of Ta on Microstructure and Abrasive Wear Resistance of Laser Clad NiCrSiB Coating,” Journal of Wuhan University of Technology (Materials Science Edition), 28(3), pp 437–443.
   Web of Science ®Google Scholar
• Pokhmurskyi, V.I., Kalakhan, O.S., Zavalii, Y.I., Okhota, H.H., and Denys, R.V. (2004), “Abrasive Wear of Plasma Coatings with Different Structures on Titanium Alloys,” Materials Science, 40(4), pp 504–511 (Translated from Fizyko-Khimichna Mekhanika Materialiv, 2004, 40(4), pp 63–69).
   Web of Science ®Google Scholar
• Wu, P., Zhou, C.Z., and Tang, X.N. (2003), “Microstructural Characterization and Wear Behavior of Laser Cladded Nickel-Based and Tungsten Carbide Composite Coatings,” Surface and Coatings Technology, 166(1), pp 84–88.
   Web of Science ®Google Scholar
• Navas, C., Colaco, R., de Damborenea, J., and Vilar, R. (2006), “Abrasive Wear Behaviour of Laser Clad and Flame Sprayed-Melted NiCrBSi Coatings,” Surface and Coatings Technology, 200(24), pp 6854–6862.
   Web of Science ®Google Scholar
• Sharma, S.P., Dwivedi, D.K., and Jain, P.K. (2009), “Effect of La2O3 Addition on the Microstructure, Hardness and Abrasive Wear Behavior of Flame Sprayed Ni Based Coatings,” Wear, 267(5–8), pp 853–859.
   Web of Science ®Google Scholar
• Leech, P.W., Li, X.S., and Alam, N. (2012), “Comparison of Abrasive Wear of a Complex High Alloy Hardfacing Deposit and WC-Ni Based Metal Matrix Composite,” Wear, 294–295, pp 380–386.
   Web of Science ®Google Scholar
• Harsha, S., Dwivedi, D.K., and Agarwal, A. (2008), “Influence of CrC Addition in Ni-Cr-Si-B Flame Sprayed Coatings on Microstructure, Microhardness and Wear Behaviour,” International Journal of Advanced Manufacturing Technology, 38(1–2), pp 93–101.
   Web of Science ®Google Scholar
• Harsha, S., Dwivedi, D.K., and Agarwal, A. (2008), “Performance of Flame Sprayed Ni-WC Coating under Abrasive Wear Conditions,” Journal of Materials Engineering and Performance, 17(1), pp 104–110.
   Web of Science ®Google Scholar
• Dhakar, B.M., Dwivedi, D.K., and Sharma, S.P. (2012), “Studies on Remelting of Tungsten Carbide and Rare Earth Modified Nickel Base Alloy Composite Coating,” Surface Engineering, 281), pp 73–80
   Web of Science ®Google Scholar
• Nurminen, J., Nakki, J., and Vuoristo, P. (2009), “Microstructure and Properties of Hard and Wear Resistant MMC Coatings Deposited by Laser Cladding,” International Journal of Refractory Metals and Hard Materials, 27(2), pp 472–478.
   Web of Science ®Google Scholar
• Hejwowski, T., Szewczyk, S., and Weronski, A. (2000), “An Investigation of the Abrasive and Erosive Wear of Flame-Sprayed Coatings,” Journal of Materials Processing Technology, 106(1–3), pp 54–57.
   Web of Science ®Google Scholar
• Klimpel, A., Dobrzanski, L.A., Lisiecki, A., and Janicki, D. (2005), “The Study of Properties of Ni-W2C and Co-W2C Powders Thermal Sprayed Deposits,” Journal of Materials Processing Technology, 164, pp 1068–1073.
   Web of Science ®Google Scholar
• Sue, A., Sreshta, H., and Qiu, B.H. (2011), “Improved Hardfacing for Drill Bits and Drilling Tools,” Journal of Thermal Spray Technology, 20(1–2), pp 372–377.
   Web of Science ®Google Scholar
• Fisher, G., Wolfe, T., and Meszaros K. (2013), “The Effects of Carbide Characteristics on the Performance of Tungsten Carbide-Based Composite Overlays, Deposited by Plasma-Transferred Arc Welding,” Journal of Thermal Spray Technology, 22(5), pp 764–771.
   Web of Science ®Google Scholar
• Simunovic, K., Grilec, K., and Simunovic, G. (2002), “Abrazijska Otpornost NiCr i NiCrWC Prevlaka” [Abrasion Resistance of NiCr and NiCrWC Coatings], Proceedings of the 1st DAAAM International Conference “Advanced Technologies for Developing Countries,” September 12–14, 2002, Slavonski Brod, Croatia.
   Google Scholar
• Katsich, C. and Badisch, E. (2011), “Effect of Carbide Degradation in a Ni-Based Hardfacing under Abrasive and Combined Impact/Abrasive Conditions,” Surface and Coatings Technology, 206(6), pp 1062–1068.
   Web of Science ®Google Scholar
• Zikin, A., Badisch, E., Hussainova, I., Tomastik, C., and Danninger, H. (2013), “Characterisation of TiC-NiMo Reinforced Ni-Based Hardfacing,” Surface and Coatings Technology, 236, pp 36–44.
   Web of Science ®Google Scholar
• Wang, Q., Chen, Z.H., Ding, Z.X., and Chen, D. (2009), “Abrasive Wear Behavior of WC Reinforced Ni-Based Composite Coating Sprayed and Fused by Oxy-Acetylene Flame,” Surface Review Letters, 16(3), pp 475–485.
   Web of Science ®Google Scholar
• Miranda, J.C. and Ramalho, A. (2001), “Abrasion Resistance of Thermal Sprayed Composite Coatings with a Nickel Alloy Matrix and a WC Hard Phase. Effect of Deposition Technique and Re-Melting,” Tribology Letters, 11(1), pp 37–48.
   Web of Science ®Google Scholar
• Polak, R., Ilo, S., and Badisch, E. (2009), “Relation Between Inter-Particle Distance (LIPD) and Abrasion in Multiphase Matrix–Carbide Materials,” Tribology Letters, 33(1), pp 29–35.
   Web of Science ®Google Scholar
• Fernandez, J.E., Fernandez, M.D., Diaz, R.V., and Navarro, R.T. (2003), “Abrasive Wear Analysis using Factorial Experiment Design,” Wear, 255, pp 38–43.
   Web of Science ®Google Scholar
• Liyanage, T., Fisher, G., and Gerlich, A.P. (2012), “Microstructures and Abrasive Wear Performance of PTAW Deposited Ni-WC Overlays Using Different Ni-Alloy Chemistries,” Wear, 274–275, pp 345–354.
   Web of Science ®Google Scholar
• Li, C.J., Wang, Y.Y., and Li, H. (2004), “Effect of Nano-Crystallization of High Velocity Oxy-Fuel-Sprayed Amorphous NiCrBSi Alloy on Properties of the Coatings,” Journal of Vacuum Science and Technology A, 22(5), pp 2000–2004.
   Web of Science ®Google Scholar
• Sharma, S.P., Dwivedi, D.K., and Jain, P.K. (2008), “Effect of CeO2 Addition on the Microstructure, Hardness, and Abrasive Wear Behaviour of Flame-Sprayed Ni-Based Coatings,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 222(7)925–933.
   Google Scholar
• Yu, T., Deng, Q.L., Zheng, J.F., Dong, G., and Yang, J.G. (2012), “Microstructure and Wear Behaviour of Laser Clad NiCrBSi plus Ta Composite Coating,” Surface Engineering, 28(5), pp 357–363.
   Web of Science ®Google Scholar
• Kulu, P. (2002), “Selection of Powder Coatings for Extreme Erosion Wear Conditions,” Advanced Engineering Materials, 4(6), pp 392–397.
   Web of Science ®Google Scholar
• Kulu, P. and Pihl, T. (2002), “Selection Criteria for Wear Resistant Powder Coatings under Extreme Erosive Wear Conditions,” Journal of Thermal Spray Technology, 11(4), pp 517–522.
   Web of Science ®Google Scholar
• Kulu, P., Hussainova, I., and Veinthal, R. (2005), “Solid Particle Erosion of Thermal Sprayed Coatings,” Wear, 258(1–4), pp 488–496.
   Web of Science ®Google Scholar
• Sari, N.Y. and Yilmaz, M. (2006), “Investigation of Abrasive + Erosive Wear Behaviour of Surface Hardening Methods Applied to AISI 1050 Steel,” Materials & Design, 27(6), pp 470–478.
   Web of Science ®Google Scholar
• Ilo, S., Just, Ch., and Xhiku, F. (2012), “Optimisation of Multiple Quality Characteristics of Hardfacing Using Grey-Based Taguchi Method,” Materials & Design, 33, pp 459–468.
   Web of Science ®Google Scholar
• Simunovic, K., Grilec, K., and Ivusic, V. (2007), “An Investigation of the Erosive Wear Resistance of Flame Sprayed and Fused NiCrBSi Coatings,” Tehnicki vjesnik-Technical Gazette, 14(1–2), pp 59–64.
   Google Scholar
• Zikin, A., Antonov, M., Hussainova, I., Katona, L., and Gavrilovic, A. (2013), “High Temperature Wear of Cermet Particle Reinforced NiCrBSi Hardfacings,” Tribology International, 68, pp 45–55.
   Web of Science ®Google Scholar
• Badisch, E., Ilo, S., and Polak, R. (2009), “Multivariable Modeling of Impact-Abrasion Wear Rates in Metal Matrix–Carbide Composite Materials,” Tribology Letters, 36(1), pp 55–62.
   Web of Science ®Google Scholar
• Uusitalo, M.A., Vuoristo, P.M. J., and Mantyla, T.A. (2002), “Elevated Temperature Erosion–Corrosion of Thermal Sprayed Coatings in Chlorine Containing Environments,” Wear, 252(7–8), pp 586–594.
   Web of Science ®Google Scholar
• Ramesh, M.R., Prakash, S., Nath, S.K., Sapra, P.K., and Venkataraman, B. (2010), “Solid Particle Erosion of HVOF Sprayed WC-Co/NiCrFeSiB Coatings,” Wear, 269(3–4), pp 197–205.
   Web of Science ®Google Scholar
• Kumar, A., Boy, J., Zatorski, R., and Stephenson, L.D. (2005), “Thermal Spray and Weld Repair Alloys for the Repair of Cavitation Damage in Turbines and Pumps: A Technical Note,” Journal of Thermal Spray Technology, 14(2), pp 177–182.
   Web of Science ®Google Scholar
• Shivamurthy, R.C., Kamaraj, M., Nagarajan, R., Shariff, S.M., and Padmanabham, G. (2010), “Slurry Erosion Characteristics and Erosive Wear Mechanisms of Co-Based and Ni-Based Coatings Formed by Laser Surface Alloying,” Metallurgical and Materials Transactions A, 41(2), pp 470–486.
   Web of Science ®Google Scholar
• Ramachandran, C.S., Balasubramanian, V., and Varahamoorthy, R. (2010), “Comparative Evaluation of the Abrasive Slurry Wear Behavior of Alloy Surfaces Produced by a Plasma Transferred Arc Hardfacing Process,” Metals and Materials International, 16(2), pp 235–246.
   Web of Science ®Google Scholar
• Lin, M.C., Chang, L.S., Lin, H.C., Yang, C.H., and Lin, K.M. (2006), “A Study of High-Speed Slurry Erosion of NiCrBSi Thermal-Sprayed Coating,” Surface and Coatings Technology, 201(6), pp 3193–3198.
   Web of Science ®Google Scholar
• Ramachandran, C.S., Balasubramanian, V., Varahamoorthy, R., and Babu, S. (2009), “Effect of Slurry Concentration, Abrasive Particle Size and Velocity on Wear Behaviour of Nickel Based (Colmonoy) Plasma Transferred Arc Hardfaced Surface,” Surface Engineering, 25(6), pp 449–457.
   Web of Science ®Google Scholar
• Desale, G.R., Paul, C.P., Gandhi, B.K., and Jain, S.C. (2009), “Erosion Wear Behavior of Laser Clad Surfaces of Low Carbon Austenitic Steel,” Wear, 266(9–10), pp 975–987.
   Web of Science ®Google Scholar
• Shivamurthy, R.C., Kamaraj, M., Nagarajan, R., Shariff, S.M., and Padmanabham, G. (2009), “Influence of Microstructure on Slurry Erosive Wear Characteristics of Laser Surface Alloyed 13Cr-4Ni Steel,” Wear, 267(1–4), pp 204–212.
   Web of Science ®Google Scholar
• Rodriguez, M., Staia, M., Gil, L., Arenas, F., and Scagni, A. (2000), “Effect of Heat Treatment on Properties of Nickel Hard Surface Alloy Deposited by HVOF,” Surface Engineering, 16(5), pp 415–420.
   Web of Science ®Google Scholar
• Ahmed, R. and Hadfield, M. (2002), “Mechanisms of Fatigue Failure in Thermal Spray Coatings,” Journal of Thermal Spray Technology, 11(3), pp 333–349.
   Web of Science ®Google Scholar
• Bomidi, J.A. R., Weinzapfel, N., Sadeghi, F., Liebel, A., and Weber, J. (2013), “An Improved Approach for 3D Rolling Contact Fatigue Simulations with Microstructure Topology,” Tribology Transactions, 56(3), pp 385–399.
   Web of Science ®Google Scholar
• Zhang, X.C., Xu, B.S.T. Tu, S.T., Xuan, F.Z., Zhang, Y.K., Wang, H.D., and Wu, Y.X. (2009), “Rolling Contact Fatigue Mechanism of a Plasma-Sprayed and Laser-Remelted Ni Alloy Coating,” Fatigue and Fracture of Engineering Materials and Structures, 32(2), pp 84–96.
   Web of Science ®Google Scholar
• Sarma, B.Y. and Mayuram, W.M. (2000), “Some Studies on Life Prediction of Thermal Sprayed Coatings under Rolling Contact Conditions,” Journal of Tribology, 122(3), pp 503–510.
   Web of Science ®Google Scholar
• Stewart, S., Ahmed, R., and Itsukaichi, T. (2005), “Rolling Contact Fatigue of Post-Treated WC-NiCrBSi Thermal Spray Coatings,” Surface and Coatings Technology, 190(2–3), pp 171–189.
   Web of Science ®Google Scholar
• Zhang, X.C., Xu, B.S., Xuan, F.Z., Wang, Z.D., and Tu, S.T. (2011), “Failure Mode and Fatigue Mechanism of Laser-Remelted Plasma-Sprayed Ni Alloy Coatings in Rolling Contact,” Surface and Coatings Technology, 205(10), pp 3119–3127.
   Web of Science ®Google Scholar
• Stewart, S., Ahmed, R., and Itsukaichi, T. (2004), “Contact Fatigue Failure Evaluation of Post-Treated WC-NiCrBSi Functionally Graded Thermal Spray Coatings,” Wear, 257(9–10), pp 962–983.
   Web of Science ®Google Scholar
• Just, Ch., Badisch, E., and Wosik, J. (2010), “Influence of Welding Current on Carbide/Matrix Interface Properties in MMCs,” Journal of Materials Processing Technology, 210(2), pp 408–414.
   Web of Science ®Google Scholar
• Rojacz, H., Hutterer, M., and Winkelmann, H. (2013), “High Temperature Single Impact Studies on Material Deformation and Fracture Behaviour of Metal Matrix Composites and Steels,” Materials Science and Engineering A, 562, pp 39–45.
   Web of Science ®Google Scholar
• Shao, T. and Luo, J. (2005), “Response Frequency Spectrum Analysis for Impact Behavior Assessment of Surface Materials,” Surface and Coatings Technology, 192(2–3), pp 365–373.
   Web of Science ®Google Scholar
• Zikin, A., Hussainova, I., Katsich, C., Badisch, E., and Tomastik, C. (2012), “Advanced Chromium Carbide-Based Hardfacings,” Surface and Coatings Technology, 206(19–20), pp 4270–4278.
   Web of Science ®Google Scholar
• Zikin, A., Hussainova, I., Winkelmann, H., Kulu, P., and Badisch, E. (2012), “Plasma Transferred Arc Hardfacings Reinforced by Chromium Carbide Based Cermet Particles,” International Heat Treatment & Surface Engineering, 6(2), pp 88–92.
   Google Scholar
• Man, H.C., Zhang, S., Yue, T.M., and Cheng, F.T. (2001), “Laser Surface Alloying of NiCrSiB on Al6061 Aluminium Alloy,” Surface and Coatings Technology, 148(2–3), pp 136–142.
   Web of Science ®Google Scholar
• Tam, K.F., Cheng, F.T., and Man, H.C. (2002), “Enhancement of Cavitation Erosion and Corrosion Resistance of Brass by Laser Surface Alloying with Ni-Cr-Si-B,” Surface and Coatings Technology, 149(1), pp 36–44.
   Web of Science ®Google Scholar
• Wu, S.K., Lin, H.C., and Yeh, C.H. (2000), “A Comparison of the Cavitation Erosion Resistance of TiNi Alloys, SUS304 Stainless Steel and Ni-Based Self-Fluxing Alloy,” Wear, 244(1–2), pp 85–93.
   Web of Science ®Google Scholar
• Leonard, B.D., Sadeghi, F., Shinde, S., and Mittelbach, M. (2012), “A Numerical and Experimental Investigation of Fretting Wear and a New Procedure for Fretting Wear Maps,” Tribology Transactions, 55(3), pp 313–324.
   Web of Science ®Google Scholar
• Hojjati-Talemi, R., Wahab, M.A., and De Baets, P. (2012), “Numerical Investigation into the Effect of Contact Geometry on Fretting Fatigue Crack Propagation Lifetime,” Tribology Transactions, 55(3), pp 365–375.
   Web of Science ®Google Scholar
• Slack, T.S., Leonard, B.D., and Sadeghi, F. (2013), “Estimating Life Scatter in Fretting Fatigue Crack Initiation,” Tribology Transactions, 56(4), pp 531–535.
   Web of Science ®Google Scholar
• Sharma, P. and Majumdar, J.D. (2012), “Surface Characterization and Mechanical Properties Evaluation of Boride-Dispersed Nickel-Based Coatings Deposited on Copper Through Thermal Spray Routes,” Journal of Thermal Spray Technology, 21(5), pp 800–809.
   Web of Science ®Google Scholar
• Sharma, P. and Majumdar, J.D. (2013), “Microstructural Characterization and Properties Evaluation of Ni-Based Hardfaced Coating on AISI 304 Stainless Steel by High Velocity Oxyfuel Coating Technique,” Metallurgical and Materials Transactions A, 44(1), pp 372–380.
   Web of Science ®Google Scholar
• Carrasquero, E.J., Lesage, J., Puchi-Cabrera, E.S., and Staia, M.H. (2008), “Fretting Wear of HVOF Ni-Cr Based Alloy Deposited on SAE 1045 Steel,” Surface and Coatings Technology, 202(18), pp 4544–4551.
   Web of Science ®Google Scholar
• Esih, I. and Dugi, Z. (1990), Tehnologija Zastite od Korozije [Protection Technology against Corrosion], Skolska Knjiga [School Book]: Zagreb, Croatia.
   Google Scholar
• Talbot, D. and Talbot, J. (1998), Corrosion Science and Technology, CRC Press, Boca Raton, FL.
   Google Scholar
• Zhao, W.M., Wang, Y., Xue, J., and Wu, K.Y. (2005), “EIS Study of the Corrosion Failure Process of Steel Coated by Nickel Base Alloy,” Acta Metallurgica Sinica-Chinese Edition, 41(2), pp 178–184.
   Web of Science ®Google Scholar
• Zhao, W. and Wang, Y. (2008), “EIS Study on the Effects of Heat Treatment on Corrosion Behavior of Nickel Base Alloy Coating on Low Carbon Steel,” Acta Metallurgica Sinica-Chinese Edition, 44(9), pp 1125–1130.
   Web of Science ®Google Scholar
• Flores, J.F., Neville, A., Kapur, N., and Gnanavelu, A. (2012), “Corrosion and Erosion–Corrosion Processes of Metal-Matrix Composites in Slurry Conditions,” Journal of Materials Engineering and Performance, 21(3), pp 395–405.
   Web of Science ®Google Scholar
• Serres, N., Hlawka, F., Costil, S., Langlade, C., and Machi, F. (2011), “Corrosion Properties of in Situ Laser Remelted NiCrBSi Coatings Comparison with Hard Chromium Coatings,” Journal of Materials Processing Technology, 211(1), pp 133–140.
   Web of Science ®Google Scholar
• Shrestha, S., Hodgkiess, T., and Neville, A. (2001), “The Effect of Post-Treatment of a High-Velocity Oxy-Fuel Ni-Cr-Mo-Si-B Coating. Part 1: Microstructure/Corrosion Behaviour Relationships,” Journal of Thermal Spray Technology, 10(3), pp 470–479.
   Web of Science ®Google Scholar
• Gil, L., Prato, M.A., and Staia, M.H. (2002), “Effect of Post-Heat Treatment on the Corrosion Resistance of NiWCrBSi HVOF Coatings in Chloride Solution,” Journal of Thermal Spray Technology, 11(1), pp 95–99.
   Web of Science ®Google Scholar
• Matsubara, Y., Sochi, Y., Tanabe, M., and Takeya, A. (2007), “Advanced Coatings on Furnace Wall Tubes,” Journal of Thermal Spray Technology, 16(2), pp 195–201.
   Web of Science ®Google Scholar
• Liu, Z., Dong, Y., Chu, Z., Yang, Y., Li, Y., and Yan, D. (2013), “Corrosion Behavior of Plasma Sprayed Ceramic and Metallic Coatings on Carbon Steel in Simulated Seawater,” Materials & Design, 52, pp 630–637.
   Web of Science ®Google Scholar
• Zhao, W.-M., Wang, Y., Han, T., Wu, K.-Y., and Xue, J. (2004), “Electrochemical Evaluation of Corrosion Resistance of NiCrBSi Coatings Deposited by HVOF,” Surface and Coatings Technology, 183(1), pp 118–125.
   Web of Science ®Google Scholar
• Zhao, W.-M., Wang, Y., Dong, L.-X., Wu, K.-Y., and Xue, J. (2005), “Corrosion Mechanism of NiCrBSi Coatings Deposited by HVOF,” Surface and Coatings Technology, 190(2–3), pp 293–298.
   Web of Science ®Google Scholar
• Navas, C., Vijande, R., Cuetos, J.M., Fernandez, M.R., and de Damborenea, J. (2006), “Corrosion Behaviour of NiCrBSi Plasma-Sprayed Coatings Partially Melted with Laser,” Surface and Coatings Technology, 201(3–4), pp 776–785.
   Web of Science ®Google Scholar
• Suutala, J., Tuominen, J., and Vuoristo, P. (2006), “Laser-Assisted Spraying and Laser Treatment of Thermally Sprayed Coatings,” Surface and Coatings Technology, 201(5), pp 1981–1987.
   Web of Science ®Google Scholar
• Bolelli, G., Lusvarghi, L., and Giovanardi, R. (2008), “A Comparison between the Corrosion Resistances of Some HVOF-Sprayed Metal Alloy Coatings,” Surface and Coatings Technology, 202(19), pp 4793–4809.
   Web of Science ®Google Scholar
• Serres, N., Hlawka, F., Costil, S., Langlade, C., Machi, F., and Cornet, A. (2009), “Dry Coatings and Ecodesign Part 1—Environmental Performances and Chemical Properties,” Surface and Coatings Technology, 204(1–2), pp 187–196.
   Web of Science ®Google Scholar
• Zhang, S.H., Li, M.X., Yoon, J.H., Cho, T.Y., He, Y.Z., and Lee, C.G. (2008), “Microstructure and Corrosion Resistance of Ni-Based Alloy Laser Coatings with Nanosize CeO2 Addition,” Science and Technology of Advanced Materials, 9(3), p 035002.
   PubMed Web of Science ®Google Scholar
• Gil, L. and Staia, M.H. (2002), “Influence of HVOF Parameters on the Corrosion Resistance of NiWCrBSi Coatings,” Thin Solid Films, 420–421, pp 446–454.
   Web of Science ®Google Scholar
• Pogrebnjak, A.D., Danilionok, M.M., Uglov, V.V., Erdybaeva, N.K., Kirik, G.V., Dub, S.N., Rusakov, V.S., Shypylenko, A.P., Zukovski, P.V., and Tuleushev, Y.Zh. (2009), “Nanocomposite Protective Coatings Based on Ti-N-Cr/Ni-Cr-B-Si-Fe, Their Structure and Properties,” Vacuum, 83, pp S235–S239.
   Web of Science ®Google Scholar
• Cha, S.C.W. Gudenau, H.W., and Bayer, G.T. (2002), “Comparison of Corrosion Behaviour of Thermal Sprayed and Diffusion-Coated Materials,” Materials and Corrosion, 53(3), pp 195–205.
   Web of Science ®Google Scholar
• Cha, S.C. and Wolpert, P. (2002), “Corrosion of Coating Materials in Oxidizing and Hydrogen Chloride Containing Atmospheres,” Materials and Corrosion, Werkstoffe und Korrosion, 53(12), pp 886–892.
   Web of Science ®Google Scholar
• Oliveira, F., Hernandez, L., Berrios, J.A., Villalobos, C., Pertuz, A., and Puchi Cabrera, E.S. (2001), “Corrosion-Fatigue Properties of a 4340 Steel Coated with Colmonoy 88 Alloy, Applied by HVOF Thermal Spray,” Surface and Coatings Technology, 140(2), pp 128–135.
   Web of Science ®Google Scholar
• Sidhu, T.S., Prakash, S., and Agrawal, R.D. (2006), “Hot Corrosion and Performance of Nickel Based Coatings,” Current Science, 90(1), pp 41–47.
   Web of Science ®Google Scholar
• Sidhu, T.S., Agrawal, R.D., and Prakash, S. (2005), “Hot Corrosion of Some Superalloys and Role of High-Velocity Oxy-Fuel Spray Coatings—A Review,” Surface and Coatings Technology, 198(1–3), pp 441–446.
   Web of Science ®Google Scholar
• Sidhu, T.S., Prakash, S., and Agrawal, R.D. (2006), “Hot Corrosion Behaviour of HVOF-Sprayed NiCrBSi Coatings on Ni and Fe-Based Superalloys in Na2SO4-60% V2O5 Environment at 900°C,” Acta Materialia, 54(3), pp 773–784.
   Web of Science ®Google Scholar
• Sidhu, T.S., Prakash, S., and Agrawal, R.D. (2006), “Performance of High-Velocity Oxyfuel-Sprayed Coatings on an Fe-Based Superalloy in Na2SO4-60% V2O5 Environment at 900°C Part II: Hot Corrosion Behavior of the Coatings,” Journal of Materials Engineering and Performance, 15(1), pp 130–138.
   Web of Science ®Google Scholar
• Sidhu, T.S., Prakash, S., and Agrawal, R.D. (2006), “Hot Corrosion Resistance of High-Velocity Oxyfuel Sprayed Coatings on a Nickel-Base Superalloy in Molten Salt Environment,” Journal of Thermal Spray Technology, 15(3), pp 387–399.
   Web of Science ®Google Scholar
• Sidhu, T.S., Malik, A., Prakash, S., and Agrawal, R.D. (2007), “Oxidation and Hot Corrosion Resistance of HVOF WC-NiCrFeSiB Coating on Ni- and Fe-Based Superalloys at 800°C,” Journal of Thermal Spray Technology, 16(5–6), pp 844–849.
   Web of Science ®Google Scholar
• Ma, X.Q., Gandy, D.W., and Frederick, G.J. (2008), “Innovation of Ultrafine Structured Alloy Coatings Having Superior Mechanical Properties and High Temperature Corrosion Resistance,” Journal of Thermal Spray Technology, 17(5–6), pp 933–941.
   Web of Science ®Google Scholar
• Sidhu, T.S., Prakash, S., and Agrawal, R.D. (2006), “Evaluation of Hot Corrosion Resistance of HVOF Coatings on a Ni-Based Superalloy in Molten Salt Environment,” Materials Science and Engineering, 430(1–2), pp 64–78.
   Google Scholar
• Sidhu, T.S., Prakash, S., and Agrawal, R.D. (2007), “A Comparative Study of Hot Corrosion Resistance of HVOF Sprayed NiCrBSi and Stellite-6 Coated Ni-Based Superalloy at 900°C,” Materials Science and Engineering A, 445–446, pp 210–218.
   Web of Science ®Google Scholar
• Sidhu, T.S., Prakash, S., and Agrawal, R.D. (2007), “Study of Molten Salt Corrosion of High Velocity Oxy-Fuel Sprayed Cermet and Nickel-Based Coatings at 900°C,” Metallurgical and Materials Transactions A, 38(1), pp 77–85.
   Web of Science ®Google Scholar
• Sidhu, T.S., Prakash, S., and Agrawal, R.D. (2006), “Hot Corrosion Studies of HVOF NiCrBSi and Stellite-6 Coatings on a Ni-Based Superalloy in an Actual Industrial Environment of a Coal Fired Boiler,” Surface and Coatings Technology, 201(3–4), pp 1602–1612.
   Web of Science ®Google Scholar
• Rojacz, H., Zikin, A., Mozelt, C., Winkelmann, H., and Badisch, E. (2013), “High Temperature Corrosion Studies of Cermet Particle Reinforced NiCrBSi Hardfacings,” Surface and Coatings Technology, 222, pp 90–96.
   Web of Science ®Google Scholar
• Sidhu, T.S., Prakash, S., and Agrawal, R.D. (2006), “Characterisations of HVOF Sprayed NiCrBSi Coatings on Ni- and Fe-Based Superalloys and Evaluation of Cyclic Oxidation Behaviour of Some Ni-Based Superalloys in Molten Salt Environment,” Thin Solid Films, 515(1), pp 95–105.
   Web of Science ®Google Scholar
• Hejwowski, T. (2006), “Investigations of Corrosion Resistance of Fe-, Ni- and Co-Based Hardfacings,” Vacuum, 80(11–12), pp 1386–1390.
   Web of Science ®Google Scholar
• Chaliampalias, D., Vourlias, G., Pavlidou, E., Skolianos, S., Chrissafis, K., and Stergioudis, G. (2009), “Comparative Examination of the Microstructure and High Temperature Oxidation Performance of NiCrBSi Flame Sprayed and Pack Cementation Coatings,” Applied Surface Science, 255(6), pp 3605–3612.
   Web of Science ®Google Scholar
• Ramesh, M.R., Prakash, S., Nath, S.K., Sapra, P.K., and Krishnamurthy, N. (2011), “Evaluation of Thermocyclic Oxidation Behavior of HVOF-Sprayed NiCrFeSiB Coatings on Boiler Tube Steels,” Journal of Thermal Spray Technology, 20(5), pp 992–1000.
   Web of Science ®Google Scholar
• Jones, M. and Llewellyn, R.J. (2012), “Erosion–Corrosion Assessment of Tungsten Carbide-Based Plasma-Transferred Arc-Welded Overlays,” Corrosion, 68(2), pp 026003-1–026003-14.
   Web of Science ®Google Scholar
• Shrestha, S., Hodgkiess, T., and Neville, A. (2001), “The Effect of Post-Treatment of a High-Velocity Oxy-Fuel Ni-Cr-Mo-Si-B Coating. Part 2: Erosion–Corrosion Behaviour,” Journal of Thermal Spray Technology, 10(4), pp 656–665.
   Web of Science ®Google Scholar
• Kwok, C.T., Man, H.C., and Cheng, F.T. (2001), “Cavitation Erosion–Corrosion Behaviour of Laser Surface Alloyed AISI 1050 Mild Steel Using NiCrSiB,” Materials Science and Engineering A, 303(1–2), pp 250–261.
   Web of Science ®Google Scholar
• Tao, Z., Xun, C., Shunxing, W., and Shian, Z. (2000), “Effect of CeO2 on Microstructure and Corrosive Wear Behavior of Laser-Cladded Ni/WC Coating,” Thin Solid Films, 379(1–2), pp 128–132.
   Web of Science ®Google Scholar
• Hidalgo, V.H., Varela, F.J. B., Menendez, A.C., and Martinez, S.P. (2001), “A Comparative Study of High-Temperature Erosion Wear of Plasma Sprayed NiCrBSiFe and WC-NiCrBSiFe Coatings under Simulated Coal-Fired Boiler Conditions,” Tribology International, 34(3), pp 161–169.
   Web of Science ®Google Scholar
• Neville, A., Reza, F., Chiovelli, S., and Revega, T. (2005), “Erosion–Corrosion Behaviour of WC-Based MMCs in Liquid–Solid Slurries,” Wear, 259(1–6), pp 181–195.
   Web of Science ®Google Scholar
• Shrestha, S., Hodgkiess, T., and Neville, A. (2005), “Erosion–Corrosion Behaviour of High-Velocity Oxy-Fuel Ni-Cr-Mo-Si-B Coatings under High-Velocity Seawater Jet Impingement,” Wear, 259(1–6), pp 208–218.
   Web of Science ®Google Scholar
• Flores, J.F., Neville, A., Kapur, N., and Gnanavelu, A. (2009), “An Experimental Study of the Erosion–Corrosion Behavior of Plasma Transferred Arc MMCs,” Wear, 267(1–4), pp 213–222.
   Web of Science ®Google Scholar
• Jones, M. and Waag, U. (2011), “The Influence of Carbide Dissolution on the Erosion–Corrosion Properties of Cast Tungsten Carbide/Ni-Based PTAW Overlays,” Wear, 271(9–10), pp 1314–1324.
   Web of Science ®Google Scholar
• Flores, J.F., Neville, A., Kapur, N., and Gnanavelu, A. (2011), “Assessing the Resistance of Metal Matrix Composites and Their Microstructural Integrity under Erosion–Corrosion,” Wear, 271(9–10), pp 1331–1340.
   Web of Science ®Google Scholar