Reciprocating Sliding Wear Performance of Hard Coating on Modified Titanium Alloy Surfaces

REFERENCES

• Hutchings, I.M. (1992), Tribology: Friction and Wear of Engineering Materials, CRC Press: Boca Raton, FL.
   Google Scholar
• Etsion, I. (2005), “State of the Art in Laser Surface Texturing,” Journal of Tribology, 127, pp 248–253.
   Web of Science ®Google Scholar
• Ronen, A., Etsion, I., and Kligerman, Y. (2001), “Friction-Reducing Surface-Texturing in Reciprocating Automotive Components,” Tribology Transactions, 44, pp 359–366.
   Web of Science ®Google Scholar
• Zhan, J. and Yang, M. (2012), “Investigation on Dimples Distribution Angle in Laser Texturing of Cylinder–Piston Ring System,” Tribology Transactions, 55, pp 693–697.
   Web of Science ®Google Scholar
• Andersson, P., Koskinen, J., Varjus, S., Gerbig, Y., et al. (2007), “Microlubrication Effect by Laser-Textured Steel Surfaces,” Wear, 262, pp 369–379.
   Web of Science ®Google Scholar
• Rapoport, L., Moshkovich, A., Perfilyev, V., et al. (2008), “Friction and Wear of MoS2 Films on Laser Textured Steel Surfaces,” Surface and Coatings Technology, 202, pp 3332–3340.
   Web of Science ®Google Scholar
• Hu, T. and Hu, L. (2011), “Tribological Properties of Lubricating Films on the Al-Si Alloy Surface via Laser Surface Texturing,” Tribology Transactions, 54, pp 800–805.
   Web of Science ®Google Scholar
• Dumitru, G., Romano, V., Weber, H.P., Pimenov, S., et al. (2003), “Laser Treatment of Tribological DLC Films,” Diamond and Related Materials, 12, pp 1034–1040.
   Web of Science ®Google Scholar
• Gadow, R. and Scherer, D. (2002), “Composite Coatings with Dry Lubrication Ability on Light Metal Substrates,” Surface and Coatings Technology, 151–152, pp 471–477.
   Web of Science ®Google Scholar
• Grzesik, W., Zalisz, Z., Krol, S., and Nieslony, P. (2006), “Investigations on Friction and Wear Mechanisms of the PVD-TiAlN Coated Carbide in Dry Sliding against Steels and Cast Iron,” Wear, 261, pp 1191–1200.
   Web of Science ®Google Scholar
• Bozyazi, E., Urgen, M., and Cakir, A.F. (2004), “Comparison of Reciprocating Wear Behaviour of Electrolytic Hard Chrome and Arc-PVD CrN Coatings,” Wear, 256, pp 832–839.
   Web of Science ®Google Scholar
• Österle, W., Klaffke, D., Griepentrog, M., Gross, U.I., et al. (2008), “Potential of Wear Resistant Coatings on Ti–6Al–4V for Artificial Hip Joint Bearing Surfaces,” Wear, 264, pp 505–517.
   Web of Science ®Google Scholar
• Matthews, A. and Leyland, A. (2002), “Development in Vapor Deposited Ceramic Coatings for Tribological Applications,” Key Engineering Materials, 206–213, pp 459–465.
   Google Scholar
• Leyland, A. and Matthews, A. (2004), “Design Criteria for Wear-Resistant Nanostructured and Glassy-Metal Coatings,” Surface and Coatings Technology, 177–178, pp 317–324.
   Web of Science ®Google Scholar
• Ni, W., Cheng, Y.-T., Lukitsch, M., Weiner, A.M., Lev, L.C., and Grummon, D.S. (2005), “Novel Layered Tribological Coatings Using a Superelastic NiTi Interlayer,” Wear, 259, pp 842–848.
   Web of Science ®Google Scholar
• Gerth, J. and Wiklund, U. (2008), “The Influence of Metallic Interlayers on the Adhesion of PVD TiN Coatings on High-Speed Steel,” Wear, 264, pp 885–892.
   Web of Science ®Google Scholar
• Hong, Y.S., Kwon, S.H., Wang, T., Kim, D.-I., Choi, J., and Kim, K.H. (2011), “Effects of Cr Interlayer on Mechanical and Tribological Properties of Cr-Al-Si-N Nanocomposite Coating,” Transactions of Nonferrous Metals Society of China, 21, pp s62–s67.
   Web of Science ®Google Scholar
• Tang, J.K., Feng, L., and Zabinski, J.S. (1998), “The Effects of Metal Interlayer Insertion on the Friction, Wear and Adhesion of TiC Coatings,” Surface and Coatings Technology, 99, pp 242–247.
   Web of Science ®Google Scholar
• Han, S., Lin, J.H., Guo, X.J., Tsai, S.H., Su, Y.O., Huang, J.H., Lu, F.-H., Shih, H.C. (2000), “The Effect of Cr Interlayer on the Microstructure of CrN Coatings on Steel,” Thin Solid Films, 377–378, pp 578–584.
   Web of Science ®Google Scholar
• ASTM G133-05. (2010), “Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear,” ASTM International, West Conshohocken, PA.
   Google Scholar
• Muthuvel, P.A. and Rajagopal, R. (2013), “Influence of Surface Texture on Tribological Performance of AlCrN Nano Composite Coated Titanium Alloy Surfaces,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 227(10), pp 1157
   Web of Science ®Google Scholar
• Cassar, G., Avelar-Batista Wilson, J.C., Banfield, S., et al. (2010), “A Study of the Reciprocating-Sliding Wear Performance of Plasma Surface Treated Titanium Alloy,” Wear, 269, pp 60–70.
   Web of Science ®Google Scholar
• Mo, J.L. and Zhu, M.H. (2008), “Sliding Tribological Behavior of AlCrN Coating,” Tribology International, 41, pp 1161–1168.
   Web of Science ®Google Scholar
• Sharma, S., Sangal, S., and Mondal, K. (2013), “On the Optical Microscopic Method for the Determination of Ball-on-Flat Surface Linearly Reciprocating Slider Wear Volume,” Wear, 300, pp 82–89.
   Web of Science ®Google Scholar
• Muthuvel, P.A. and Rajagopal, R. (2012), “Analysis of Sliding Behavior of Non-Conformal Contacting Surfaces Subjected to Shear Traction,” Proceedia Engineering, 38, pp 2645–2256.
   Google Scholar
• Autay, R., Kchaou, M., and Dammak, F. (2012), “Friction and Wear Behavior of Steels under Different Reciprocating Sliding Conditions,” Tribology Transactions, 55, pp 590–598.
   Web of Science ®Google Scholar