Effects of Oxide Layer Formation during Lubricated Sliding on the Frictional Properties of Titanium-Coated Silicon

REFERENCES

• Holmberg, K. and Matthews, A. (2009), Coatings Tribology: Properties, Mechanisms, Techniques and Applications in Surface Engineering, Elsevier Science: Amsterdam.
   Google Scholar
• Cheng, J., Yu, Y., Fu, L.C., Li, F., Qiao, Z.H., Li, J.S., Yang, J., and Liu, W.M. (2013), “Effect of TiB2 on Dry-Sliding Tribological Properties of TiAl Intermetallics,” Tribology International, 62, pp 91–99.
   Web of Science ®Google Scholar
• Rastkar, A.R. and Shokri, B. (2008), “A Multi-Step Process of Oxygen Diffusion to Improve the Wear Performance of a Gamma-Based Titanium Aluminide,” Wear, 264(11–12), pp 973–979.
   Web of Science ®Google Scholar
• Das, G., Kestler, H., Clemens, H., and Bartolotta, P.A. (2004), “Sheet Gamma TiAl: Status and Opportunities,” JOM, 56(11), pp 42–45.
   Web of Science ®Google Scholar
• Cao, X., Shao, T., and Wen, S. (2004), “Micro/Nanotribological and Mechanical Studies of TiN Thin-Film for MEMS Applications,” Tribology Transactions, 58, 227–232.
   Google Scholar
• Bhushan, B. (2002), Introduction to Tribology, John Wiley & Sons: New York.
   Google Scholar
• Savas, S. and Danisman, S. (2014), “Multipass Sliding Wear Behavior of TiAlN Coatings Using a Spherical Indenter: Effect of Coating Parameters and Duplex Treatment,” Tribology Transactions, 57, 242–255.
   Web of Science ®Google Scholar
• Egaña, A., Rech, J., and Arrazola, P.J. (2012), “Characterization of Friction and Heat Partition Coefficients during Machining of a TiAl6V4 Titanium Alloy and a Cemented Carbide,” Tribology Transactions, 55, 665–676.
   Web of Science ®Google Scholar
• Blau, P.J., Erdman, D.L. , III, Ohriner, E., and Jolly, B.C. (2011), “ High-Temperature Galling Characteristics of Ti-6Al-4V with and without Surface Treatments,” Tribology Transactions, 54, 192–200.
   Web of Science ®Google Scholar
• Pettersson, U. and Jacobson, S. (2004), “Friction and Wear Properties of Micro Textured DLC Coated Surfaces in Boundary Lubricated Sliding,” Tribology Letters, 17(3), pp 553–559.
   Web of Science ®Google Scholar
• Cho, C.W., Hong, B., and Lee, Y.Z. (2005), “Wear Life Evaluation of Diamond-Like carbon Films Deposited by Microwave Plasma-Enhanced CVD and RF Plasma-Enhanced CVD Method,” Wear, 259(1–6), pp 789–794.
   Web of Science ®Google Scholar
• Polcar, T., Kubart, T., Novak, R., Kopecky, L., and Siroky, P. (2005), “Comparison of Tribological Behaviour of TiN, TiCN and CrN at Elevated Temperatures,” Surface & Coatings Technology, 193(1–3), pp 192–199.
   Web of Science ®Google Scholar
• Cho, C.W. and Lee, Y.Z. (2003), “Effects of the Oxide Layer Formed on TiN Coated Silicon Wafer on the Friction and Wear Characteristics in Dry Sliding,” Surface & Coatings Technology, 168, pp 84–90.
   Web of Science ®Google Scholar
• Bloyce, A., Qi, P.Y., Dong, H., and Bell, T. (1998), “Surface Modification of Titanium Alloys for Combined Improvements in Corrosion and Wear Resistance,” Surface & Coatings Technology, 107(2–3), pp 125–132.
   Web of Science ®Google Scholar
• Siva Rama Krishna, D. and Sun, Y. (2005), “Effect of Thermal Oxidation Conditions on Tribologial Behaviour of Titanium Films on 316L Stainless Steel,” Surface & Coatings Technology, 198(1–3), pp 447–453.
   Web of Science ®Google Scholar
• Dong, H. and Li, X.Y. (2000), “Oxygen Boost Diffusion for the Deep-Case Hardening of Titanium Alloys,” Materials Science and Engineering A, 280(2), pp 303–310.
   Web of Science ®Google Scholar
• Krishna, D.S. R., Brama, Y.L., and Sun, Y. (2007), “Thick Rutile Layer on Titanium for Tribological Applications,” Tribology International, 40(2), pp 329–334.
   Web of Science ®Google Scholar
• Palacio, M.L. B. and Bhushan, B. (2010), “Normal and Lateral Force Calibration Techniques for AFM Cantilevers,” Critical Reviews in Solid State and Materials Sciences, 35(2), pp 73–104.
   Web of Science ®Google Scholar
• Cho, C.W. and Lee, Y.Z. (2004), “Friction Transition Diagram Considering the Effects of Oxide Layer Formed on Wear Track of AISI 1045 Steel Disk against TiN Coated AISI 52100 Steel Ball in Sliding,” Surface & Coatings Technology, 179, pp 1–9.
   Web of Science ®Google Scholar
• Cho, C.W. and Lee, Y.Z. (2004), “Tribological Characteristics of Oxide Layer Formed on TiN Coated Silicon Wafer,” Tribology Letters, 16(4), pp 259–263.
   Web of Science ®Google Scholar
• Zhang, W.F., He, Y.L., Zhang, M.S., Yin, Z., and Chen, Q. (2000), “Raman Scattering Study on Anatase TiO2 Nanocrystals,” Journal of Physics D: Applied Physics, 33(8), pp 912–916.
   Web of Science ®Google Scholar
• Melendres, C.A., Narayanasamy, A., Maroni, V.A., and Siegel, R.W. (1989), “Raman-Spectroscopy of Nanophase TiO2,” Journal of Materials Research, 4(5), pp 1246–1250.
   Web of Science ®Google Scholar
• Feist, T.P. and Davies, P.K. (1992), “The Soft Chemical Synthesis of TiO2 (B) from Layered Titanates,” Journal of Solid State Chemistry, 101(2), pp 275–295.
   Web of Science ®Google Scholar
• Molinari, A., Straffelini, G., Tesi, B., and Bacci, T. (1997), “Dry Sliding Wear Mechanisms of the Ti6Al4V Alloy,” Wear, 208(1–2), pp 105–112.
   Web of Science ®Google Scholar
• Bowden, F.P. and Tabor, D. (1964), The Friction and Lubrication of Solids, Part II, Clarendon Press: Oxford, UK.
   Google Scholar