Study of the Microstructures and Abrasive Characteristics of Mo-Fe-C Hardfacing Alloys Fabricated by Gas Tungsten Arc Welding

REFERENCES

• Xinhong, W., Zengda, Z., Sili, S., and Shiyao, Q. (2006), Microstructure and wear properties of in situ TiC/FeCrBSi composite coating prepared by gas tungsten arc welding. Wear., 260, pp. 705–710.
   Web of Science ®Google Scholar
• Martinez, E., Wiklund, U., and Esteve, J. (2002), Tribological performance of TiN supported molybdenum and tantalum carbide coatings in abrasion and sliding contact. Wear., 253, pp. 1182–1187.
   Web of Science ®Google Scholar
• Raynor, G.V., and Rivlin, V.G. (1988), Phase Equilibria in Iron Ternary Alloys. The Institute of Metals.
   Google Scholar
• Lee, K., Lee, S., Kim, Y., Hong, H., Oh, Y., and Kim, S. (2003), The effects of additive elements on the sliding wear behavior of Fe-base hardfacing alloys. Wear., 255, pp. 481–488.
   Web of Science ®Google Scholar
• Buytoz, S. (2006), Microstructural properties of SiC based hardfacing on low alloy steel. Surf. Coat. Technol., 200, pp. 3734–3742.
   Web of Science ®Google Scholar
• Chang, C., Lin, C., Hsieh, C., Chen, J., and Wu, W. (2009), Micro-structural characteristics of Fe–40wt%Cr–xC hardfacing alloys with [1.0–4.0wt%] carbon content. J. Alloys Compd., 487, pp. 83–89.
   Web of Science ®Google Scholar
• Chang, C., Chen, Y., and Wu, W. (2010), Microstructural and abrasive characteristics of high carbon Fe–Cr–C hardfacing alloy. Tribol. Int., 43, pp. 929–934.
   Web of Science ®Google Scholar
• Buytoz, S., and Ulutan, M. (2006), In situ synthesis of SiC reinforced MMC surface on AISI 304 stainless steel by TIG surface alloying. Surf. Coat. Technol., 200, pp. 3698–3704.
   Web of Science ®Google Scholar
• Mridha, S., ong, H.S., poh, L.S., and Cheang, p. (2001), Intermetallic coatings produced by TIG surface melting. J. Mater. Process. Technol., 113, pp. 516–520.
   Web of Science ®Google Scholar
• Xinhong, W., Lin, C., Min, Z., and Zengda, Z. (2009), abrication of multiple carbide particles reinforced Fe-based surface hardfacing layerproduced by gas tungsten arc welding process. Surf. Coat. Technol., 203, pp. 976–980.
   Web of Science ®Google Scholar
• Wang, X., Zhang, M., and Qu, S. (2010), Development and characterization of (Ti, Mo)C carbides reinforced Fe-based surface composite coating produced by laser cladding. Opt. Lasers Eng., 48, pp. 893–898.
   Web of Science ®Google Scholar
• Wang, X.H., Song, S.L., Qu, S.Y., and Zou, Z.D. (2007), Characterization of in situ synthesized TiC particle reinforced Fe-based composite coatings produced by multi-pass overlapping GTAW melting process. Surf. Coat. Technol., 201, pp. 5899–5905.
   Web of Science ®Google Scholar
• Wang, X.H., Song, S.L., Zou, Z.D., and Qu, S.Y. (2006), Fabricating TiC particles reinforced Fe-based composite coatings produced by GTAW multi-layers melting process. Mater. Sci. Eng. A., 441, pp. 60–67.
   Web of Science ®Google Scholar
• Lin, Y.C., and Chang, K.Y. (2010), Elucidating the microstructure and wear behavior of tungsten carbide multi-pass cladding on AISI 1050 steel. J. Mater. Process. Technol., 210, pp. 219–225.
   Web of Science ®Google Scholar
• Fan, C., Chen, M., Chang, C., and Wu, W. (2006), Microstructure change caused by (Cr,Fe)23C6 carbides in high chromium. Surf. Coat. Technol., 201, pp. 908–912.
   Web of Science ®Google Scholar
• Antony, K.C. (1983), Hardfacing, Welding, Brazing, and Soldering, 9th ed., Vol 58. Metals Handbook. . s.l.: American Society for Metals, pp. 771–793.
   Google Scholar
• Thawari, G., Sundarararjan, G., and Joshi, S.V. (2003), Laser surface alloying of medium carbon steel with SiC(P). Thin Solid Films., Vol. 423, pp. 41–53.
   Web of Science ®Google Scholar
• Dogan, O.N., Hawk, J.A., and Laird, G. (1997), Metall. Mater. Trans. A., 28, pp. 1315–1328.
   Web of Science ®Google Scholar
• Czichos, H. (1978), Tribology_A Systems Approach to the Lubrication and Wear. Amsterdam: Elsevier, pp. 195–196.
   Google Scholar
• Hegeman, J.B. J. W., De Hosson, J.Th. M., and de With, G. (2001), Grinding of WC–Co hard-metals. Wear., 248, pp. 187–196.
   Web of Science ®Google Scholar
• Roy, M. (2014), Solid Particle Erosion Behaviour of WC Coating Obtained by Electro Spark Technique and Detonation Spraying. TRIBOL T., In press.
   Web of Science ®Google Scholar
• Usmani, S., Sampath, S, Houck, D.L., and Lee, D. (1997), Effect of Carbide Grain Size on the Sliding and Abrasive Wear Behavior of Thermally Sprayed WC-Co Coatings. TRIBOL T., 40, pp. 470–478.
   Web of Science ®Google Scholar
• Basso, A., Laino, S., and Dommarco, R.C. (2013), Wear Behavior of Carbidic Ductile Iron with Different Matrices and Carbide Distribution. TRIBOL T., 56, pp. 33–40.
   Web of Science ®Google Scholar
• Peng, D.X. (2012), Optimization of Welding Parameters on Wear Performance of Cladded Layer with TiC Ceramic via a Taguchi Approach. TRIBOL T., 55, pp. 122–129.
   Web of Science ®Google Scholar