REFERENCES
- Booser, E. (1984), CRC Hand Book of Lubrication, CRC Press Inc.: NewYork.
- Castro, J. and Seabra, J. (1998), “Scuffing and Lubricant Film Breakdown in FZG gears Part I. An Analytical Approach,” Wear, 215, pp 104–113.
- Tan, C. K. and Mba, D. (2005), “Identification of the Acoustic Emission Source during a Comparative Study on Diagnosis of a Spur Gearbox,” Tribology International, 38(5), pp 469–480.
- Glodez, S. H., Winter, H., and Stüwe, H. P. (1997), “A Fracture Mechanics Model for the Wear of Gear Flanks by Pitting,” Wear, 208(1–2), pp 177–183.
- Sung, C. K., Tai, H. M., and Chen, H. M. (2000), “Locating Defects of Gear System by the Technique of Wavelet Transform,” Mechanism and Machine Theory, 35, pp 1169–1182.
- Yesilyurt, I., Fengshou., and Ball, A. D. (2003), “Gear Tooth Stiffness Measurement Using Modal Analysis and Its Use in Wear Fault Severity Assessment of Spur Gears,” NDT & E International, 36, pp 357–372.
- Tahar, F., Fakher C., and Mohamed, H. (2005), “Numerical and Experimental Analysis of a Gear System with Teeth Defects,” International Journal of Advanced Manufacturing Technology, 25, pp 542–550.
- Dialpiaz, G., Rivola, A., and Rubini, R. (2000), “Effectiveness and Sensitivity of Vibration Processing Techniques for Local Fault Detection in Gears,” Mechanical Systems and Signal Processing, 3, pp 387–412.
- Baydar, N. and Ball, A. (2003), “Detection and diagnosis of Gear Failure via Vibration and Acoustic Signals Using Wavelet Transform,” Mechanical Systems and Signal Processing, 17(4), pp 787–804.
- Boulahbal, D., Golnaraghi, M. F., and Ismail, F. (1999), “Amplitude and Phase Maps for the Identification of Cracks in Geared Systems,” Mechanical Systems and Signal Processing, 13(3), pp 423–436.
- Wang, W. Q., Ismail, F., and Golnaraghi, M. F. (2001), “Assessment of Gear Damage Monitoring Techniques Using Vibration Measurements,” Mechanical Systems and Signal Processing, 15(5), pp 905–922.
- Yoshida, A., Ohue, Y., and Ishikaw, H. (2000), “Diagnosis of Tooth Surface Failure by Wavelet Transform of Dynamic Characteristics,” Tribology International, 33, pp 273–279.
- Belsak, A. and Flasker, J. (2006), “Method for Detecting Fatigue Crack in Gears,” Theoretical and Applied Fracture Mechanics, 46, pp 105–113.
- Staszewski, W. J., Worden, K., and Tomlinson, G. R. (1997), “Time–Frequency Analysis in Gearbox Fault Detection Using the Wigner-Ville Distribution and Pattern Recognition,” Mechanical Systems and Signal Processing, 11(5), pp 673–692.
- Lin, J. and Qu, L. (2000), “Feature Extraction Based on Morlet Wavelet and Its Application for Mechanical Fault Diagnosis,” Journal of Sound and Vibration, 234(1), pp 135–148.
- Zheng, H., Li, Z., and Chen, X. (2002), “Gear Fault Diagnosis Based on Continuous Wavelet Transform,” Mechanical Systems and Signal Processing, 16(2–3), pp 447–457.
- Choy, F. K., Jia, W., and Wu, R. (2009), “Identification of Bearing and Gear Tooth Damage in a Transmission System,” Tribology Transactions, 52, pp 303–309.
- Krantz, T. L., and Kahraman, A. (2009), “An Experimental Investigation of the Influence of the Lubricant Viscosity and Additives on Gear Wear,” Tribology Transactions, 47, pp 138–148.
- Rezaei, A., Dadouche, A., and Wickramasinghe, V., and Dmochowski, W. (2011), A Comparison Study between Acoustic Sensors for Bearing Fault Detection under Different Speed and Load Using a Verity of Signal Processing Techniques,” Tribology Transactions, 54, pp 179–186.
- Tamminana, V. K., Vijayakar, S., and Kahraman, A. (2007), “A Study of the Relationship between the Dynamic Factors and the Dynamic Transmission Error of Spur Gear Pairs,” Journal of Mechanical Design, 129(1), pp 79–83.
- Kang, M. R. and Kahraman, A. (2012), “Measurement of Vibratory Motions of Gears Supported by Compliant Shafts,” Mechanical Systems and Signal Processing, 29, pp 391–403.
- Amarnath, M., Sujatha, C., and Swarnamani, S. (2009), “Experimental Studies on the Effects of Reduction in Gear Tooth Stiffness and Lubricant Film Thickness in a Spur Geared System,” Tribology International, 42, pp 340–352.
- Amarnath, M., Sujatha, C., and Swarnamani, S. (2010), “Detection and Diagnosis of Gear Tooth Wear through Metallurgical and Oil Analysis,” Tribology Online, 5(2), pp 102–110.
- Hohn, B.-R. and Michaelis, K. (2003), “Influence of Oil Temperature on Gear Failures,” Tribology International, 37, pp 103–109.
- Castro, J. and Seabra, J. (1998), “Scuffing and Lubricant Film Breakdown in FZG Gears Part II New Scuffing Criteria, Lubricant and Temperature Dependent,” Wear, 215, pp 114–122.
- Wuxing, L., Tse, P. W., Guiicai, Z., and Tielin, S. (2004), “Classification of Gear Faults Using Cumulant and the Radial Basis Function,” Mechanical Systems and Signal Processing, 18, pp 381–389.
- Rubini, R. and Meneghetti, U. (2001), “Application of the Envelope and Wavelet Transform Analysis for the Diagnosis of Incipient Faults in Ball Bearings,” Mechanical Systems and Signal Processing, 15(2), pp 287–302.
- Dowson, D. and Higginson, G. R. (1977), Elastic Hydrodynamic Lubrication, Pergamon Press: New York.
- Moore, A. J. (1993), Lubrication Gearing, Mechanical Engineering Publication Limited: London.
- Alban, E. (1986), Failures of Gears, Vol. 11, ASM: Metals Park, OH.