Effects of Al-Cr-Fe Quasicrystal Content on Tribological Properties of Cold-Sprayed Titanium Composite Coatings

REFERENCES

• Boyer, R. R. (1996), “An Overview on the Use of Titanium in the Aerospace Industry,” Materials Science and Engineering A, 213(1–2), pp 103–114.
   Web of Science ®Google Scholar
• Dong, H. and Bell, T. (2000), “Enhanced Wear Resistance of Titanium Surfaces by a New Thermal Oxidation Treatment,” Wear, 238(2), pp 131–137.
   Web of Science ®Google Scholar
• Wang, K. (1996), “The Use of Titanium for Medical Applications in the USA,” Materials Science and Engineering A, 213(1–2), pp 134–137.
   Web of Science ®Google Scholar
• Long, M. and Rack, H. J. (1998), “Titanium Alloys in Total Joint Replacement—A Materials Science Perspective,” Biomaterials, 19(18), pp 1621–1639.
   PubMed Web of Science ®Google Scholar
• Zhou, C., Cai, F., Kong, J., Gong, S., and Xu, H. (2004), “A Study on the Tribological Properties of Low-Pressure Plasma-Sprayed Al-Cu-Fe-Cr Quasicrystalline Coating on Titanium Alloy,” Surface & Coatings Technology, 187(2–3), pp 225–229.
   Web of Science ®Google Scholar
• Cizek, J. and Khor, K. A. (2012), “Role of In-Flight Temperature and Velocity of Powder Particles on Plasma Sprayed Hydroxyapatite Coating Characteristics,” Surface & Coatings Technology, 206(8–9), pp 2181–2191.
   Web of Science ®Google Scholar
• Pitchuka, S. B., Boesl, B., Zhang, C., Lahiri, D., Nieto, A., Sundararajan, G., and Agarwal, A. (2014), “Dry Sliding Wear Behavior of Cold Sprayed Aluminum Amorphous/Nanocrystalline Alloy Coatings,” Surface & Coatings Technology, 238, pp 118–125.
   Web of Science ®Google Scholar
• Shechtman, D., Blech, I., Gratias, D., and Cahn, J. W. (1984), “Metallic Phase with Long-Range Orientational Order and No Translational Symmetry,” Physical Review Letters, 53(20), pp 1951–1953.
   Web of Science ®Google Scholar
• Levine, D. and Steinhardt, P. J. (1986), “Quasicrystals. I. Definition and Structure,” Physical Review B, 34(2), pp 596–616.
   PubMed Web of Science ®Google Scholar
• Dubois, J.-M. (2000), “New Prospects from Potential Applications of Quasicrystalline Materials,” Materials Science and Engineering A, 294–296, pp 4–9.
   Web of Science ®Google Scholar
• Huttunen-Saarivirta, E. (2004), “Microstructure, Fabrication and Properties of Quasicrystalline Al-Cu-Fe Alloys: A Review,” Journal of Alloys and Compounds, 363(1–2), pp 154–178.
   Web of Science ®Google Scholar
• Dubois, J. M., Kang, S. S., and Stebut, J. (1991), “Quasicrystalline Low-Friction Coatings,” Journal of Materials Science Letters, 10(9), pp 537–541.
   Google Scholar
• Lang, C. I., Shechtman, D., and Gonzalez, E. (1999), “Friction and Wear Properties of Quasi-Periodic Material Coatings,” Bulletin of Materials Science, 22(3), pp 189–192.
   Web of Science ®Google Scholar
• Fu, Y. Q., An, L. T., Zhou, F., Zhao, Y. Y., Yang, D., and Gao, Y. (2008), “Al-Cu-Cr Quasicrystalline Coatings Prepared by Low Power Plasma Spraying,” Surface & Coatings Technology, 202, pp 4964–4970.
   Web of Science ®Google Scholar
• Guo, X. P., Li, W. Y., and Liao, H. L. (2014), “Microstructure and Tribological Behavior of Cold Sprayed Tin–Bronze/Quasicrystal Composite Coatings,” Journal of Materials Engineering, 0(4), pp 68–72, 78.
   Web of Science ®Google Scholar
• Shaitura, D. S., Teplov, A. A., Chikina, E. A., Klevachev, A. M., Efimochkin, I. Y., Fedotov, S. V., Petrzhik, M. I., Levashov, E. A., and Abuzin, Y. A. (2010), “Composites Reinforced by Al-Cu-Fe Quasicrystalline Particles with a Copper Matrix and Their Tribological Properties,” Journal of Surface Investigation, 4(6), pp 951–955.
   Web of Science ®Google Scholar
• Khun, N. W., Frankel, G. S., and Sumption, M. (2014), “Effects of Normal Load, Sliding Speed and Surface Roughness on Tribological Properties of Niobium under Dry and Wet Conditions,” Tribology Transactions, 57(5), pp 944–954.
   Web of Science ®Google Scholar
• Nakamura, T., Qian, G., and Berndt, C. C. (2000), “Effects of Pores on Mechanical Properties of Plasma-Sprayed Ceramic Coatings,” Journal of the American Ceramics Society, 83(3), pp 578–584.
   Web of Science ®Google Scholar
• Sarikaya, O. (2005), “Effect of Some Parameters on Microstructure and Hardness of Alumina Coatings Prepared by the Air Plasma Spraying Process,” Surface & Coatings Technology, 190(2–3), pp 388–393.
   Google Scholar
• Shen, Y. L. and Chawla, N. (2001), “On the Correlation between Hardness and Tensile Strength in Particle Reinforced Metal Matrix Composites,” Materials Science and Engineering A, 297(1–2), pp 44–47.
   Web of Science ®Google Scholar
• Wang, Z. Z., Gu, P., and Zhang, Z. (2010), “Indentation and Scratch Behavior of Nano-SiO2/Polycarbonate Composite Coating at the Micro/Nano-Scale,” Wear, 269(1–2), pp 21–25.
   Web of Science ®Google Scholar
• Mate, C. M. (2008), Tribology on the Small Scale: A Bottom Up Approach to Friction, Lubrication and Wear, 1st ed., Taylor & Francis.
   Google Scholar
• Ronkainen, H., Laukkanen, A., and Holmberg, K. (2007), “Friction in a Coated Surface Deformed by a Sliding Sphere,” Wear, 263(7–12), pp 1315–1323.
   Web of Science ®Google Scholar
• Khun, N. W., Rincon Troconis, B. C., and Frankel, G. S. (2014), “Effects of Carbon Nanotube Content on Adhesion Strength and Wear and Corrosion Resistance of Epoxy Composite Coatings on AA2024-T3,” Progress in Organic Coatings, 77(1), pp 72–80.
   Web of Science ®Google Scholar
• Khun, N. W., Zhang, H., Yang, J. L., and Liu, E. (2013), “Mechanical and Tribological Properties of Epoxy Matrix Composites Modified with Microencapsulated Mixture of Wax Lubricant and Multi-Walled Carbon Nanotubes,” Friction, 1(4), pp 341–349.
   Google Scholar
• Khun, N. W., Sun, D. W., Huang, M. X., Yang, J. L., and Yue, C. Y. (2014), “Wear Resistant Epoxy Composites with Diisocyanate-Based Self-Healing Functionality,” Wear, 313, pp 19–28.
   Web of Science ®Google Scholar
• Khun, N. W. and Liu, E. (2012), “Tribological Behavior of Polyurethane Immersed in Acidic Solution,” Tribology Transactions, 55(4), pp 401–408.
   Web of Science ®Google Scholar
• Blau, P. J. (1996), Friction Science and Technology, Taylor & Francis: New York.
   Google Scholar
• Bhushan, B. (1996), Tribology and Mechanics of Magnetic Storage Device, 2nd ed., Taylor & Francis: New York.
   Google Scholar
• Clerico, M. and Patierno, V. (1979), “Sliding Wear of Polymeric Composites,” Wear, 53(2), pp 279–301.
   Web of Science ®Google Scholar
• Barrett, T. S., Stachowiak, G. W., and Batchelor, A. W. (1992), “Effect of Roughness and Sliding Speed on the Wear and Friction of Ultra-High Molecular Weight Polyethylene,” Wear, 153(2), pp 331–350.
   Web of Science ®Google Scholar
• Svahn, F., Kassman-Rudolphi, A., and Wallén, E. (2003), “The Influence of Surface Roughness on Friction and Wear of Machine Element Coatings,” Wear, 254(11), pp 1092–1098.
   Web of Science ®Google Scholar
• Menezes, P. L., Kishore, and Kailas, S. V. (2009), “Influence of Surface Texture and Roughness Parameters on Friction and Transfer Layer Formation during Sliding of Aluminium Pin on Steel Plate,” Wear, 267(9–10), pp 1534–1549.
   Web of Science ®Google Scholar
• Meng, J., Loh, N. H., Tay, B. Y., Fu, G., and Tor, S. B. (2010), “Tribological Behavior of 316L Stainless Steel Fabricated by Micro Powder Injection Molding,” Wear, 268(7–8), pp 1013–1019.
   Web of Science ®Google Scholar
• Kasai, T., Fu, X. Y., Rigney, D. A., and Zharin, A. L. (1999), “Applications of a Non-Contacting Kelvin Probe during Sliding,” Wear, 225–229, pp 1186–1204.
   Web of Science ®Google Scholar
• Stark, L. M., Smid, I., Segall, A. E., Eden, T. J., and Potter, J. (2012), “Self-Lubricating Cold-Sprayed Coatings Utilizing Microscale Nickel-Encapsulated Hexagonal Boron Nitride,” Tribology Transactions, 55(5), pp 624–630.
   Web of Science ®Google Scholar
• Chen, K. M., Zhang, Q. Y., Li, X. X., Wang, L., Cui, X. H., and Wang, S. Q. (2014), “Comparative Study of Wear Behaviors of a Selected Titanium Alloy and AISI H13 Steel as a Function of Temperature and Load,” Tribology Transactions, 57(5), pp 838–845.
   Web of Science ®Google Scholar