Tribological Performance and Coating Characteristics of Sputter-Deposited Ti-Doped MoS₂ in Rolling and Sliding Contact

REFERENCES

• Hilton, M. R. and Fleischauer, P. D. (1992), “Applications of Solid Lubricant Films in Spacecraft,” Surface and Coatings Technology, 54–55, pp 435–441.
   Web of Science ®Google Scholar
• Renevier, N. M., Lobiondo, N., Fox, V. C., Teer, D. G., and Hampshire, J. (2000), “Performance of MoS2/Metal Composite Coatings Used for Dry Machining and Other Industrial Applications,” Surface and Coatings Technology, 123, pp 84–91.
   Web of Science ®Google Scholar
• Singer, I. L. (1988), “Solid Lubricating Films for Extreme Environments,” MRS Proceedings, 140, p 125.
   Google Scholar
• Hilton, M. R., Bauer, R., and Fleischauer, P. D. (1990), “Tribological Performance and Deformation of Sputter-Deposited MoS2 Solid Lubricant Films during Sliding Wear and Indentation Contact,” Thin Solid Films, 188, pp 219–236.
   Web of Science ®Google Scholar
• Fleischauer, P. D. and Bauer, R. (1988), “Chemical and Structural Effects on the Lubrication Properties of Sputtered MoS2 Films,” Tribology Transactions, 31, pp 239–250.
   Web of Science ®Google Scholar
• Winer, W. (1967), “Molybdenum Disulfide as a Lubricant: A Review of the Fundamental Knowledge,” Wear, 10, pp 422–452.
   Web of Science ®Google Scholar
• Spalvins, T. (1971), “Lubrication with Sputtered MoS2 Films,” ASLE Transactions, 14, pp 267–274.
   Google Scholar
• Spalvins, T. (1987), “A Review of Recent Advances in Solid Film Lubrication,” Journal of Vacuum Science and Technology A, 5, pp 212–219.
   Web of Science ®Google Scholar
• Lince, J. R., Hilton, M. R., and Bommannavar, A. S. (1995), “Metal Incorporation in Sputter-Deposited MoS2 Films Studied by Extended X-ray Absorption Fine Structure,” Journal of Materials Research, 10, pp 2091–2105.
   Web of Science ®Google Scholar
• Stupp, B. C. (1981), “Synergistic Effects of Metals Co-Sputtered with MoS2,” Thin Solid Films, 84, pp 257–266.
   Web of Science ®Google Scholar
• Zabinski, J. S., Donley, M. S., Walck, S. D., Schneider, T. R., and McDevitt, N. T. (1995), “The Effects of Dopants on the Chemistry and Tribology of Sputter-Deposited MoS2 Films,” Tribology Transactions, 38, pp 894–904.
   Web of Science ®Google Scholar
• Simmonds, M. C., Savan, A., Pflüger, E., and Van Swygenhoven, H. (2000), “Mechanical and Tribological Performance of MoS2 Co-Sputtered Composites,” Surface and Coatings Technology, 126, pp 15–24.
   Web of Science ®Google Scholar
• Renevier, N. M., Fox, V. C., Teer, D. G., and Hampshire, J. (2000), “Coating Characteristics and Tribological Properties of Sputter-Deposited MoS2/Metal Composite Coatings Deposited by Closed Field Unbalanced Magnetron Sputter Ion Plating,” Surface and Coatings Technology, 127, pp 24–37.
   Web of Science ®Google Scholar
• Lince, J. R. (2004), “Tribology of Co-Sputtered Nanocomposite Au/MoS2 Solid Lubricant Films over a Wide Contact Stress Range,” Tribology Letters, 17, pp 419–428.
   Web of Science ®Google Scholar
• Hu, J. J., Bultman, J. E., and Zabinski, J. S. (2006), “Microstructure and Lubrication Mechanism of Multilayered MoS2/Sb2O3 Thin Films,” Tribology Letters, 21, pp 169–174.
   Web of Science ®Google Scholar
• Scharf, T. W., Kotula, P. G., and Prasad, S. V. (2010), “Friction and Wear Mechanisms in MoS2/Sb2O3/Au Nanocomposite Coatings,” Acta Materialia, 58, pp 4100–4109.
   Web of Science ®Google Scholar
• Teer, D. G. (2001), “New solid Lubricant Coatings,” Wear, 251, pp 1068–1074.
   Web of Science ®Google Scholar
• Arslan, E., Totik, Y., and Efeoglu, I. (2012), “Comparison of Structure and Tribological Properties of MoS2-Ti Films Deposited by Biased-DC and Pulsed-DC,” Progress in Organic Coatings, 74, pp 772–776.
   Web of Science ®Google Scholar
• Hilton, M. R., Bauer, R., Didziulis, S. V., Dugger, M. T., Keem, J. M., and Scholhamer, J. (1992), “Structural and Tribological Studies of MoS2 Solid Lubricant Films Having Tailored Metal-Multilayer Nanostructures,” Surface and Coatings Technology, 53, pp 13–23.
   Web of Science ®Google Scholar
• Rigato, V., Maggioni, G., Patelli, A., Boscarino, D., Renevier, N. M., and Teer, D. G. (2000), “Properties of Sputter-Deposited MoS2/Metal Composite Coatings Deposited by Closed Field Unbalanced Magnetron Sputter Ion Plating,” Surface and Coatings Technology, 131, pp 206–210.
   Web of Science ®Google Scholar
• Renevier, N. M., Fox, V. C., Teer, D. G., and Hampshire, J. (2000), “Performance of Low Friction MoS2/Titanium Composite Coatings Used in Forming Applications,” Materials & Design, 21, pp 337–343.
   Web of Science ®Google Scholar
• Amaro, R. I., Martins, R. C., Seabra, J. O., Renevier, N. M., and Teer, D. G. (2005), “Molybdenum Disulphide/Titanium Low Friction Coating for Gears Application,” Tribology International, 38, pp 423–434.
   Web of Science ®Google Scholar
• Bellido-González, V., Jones, A. H. S., Hampshire, J., Allen, T. J., Witts, J., Teer, D. G., et al. (1997), “Tribological Behaviour of High Performance MoS2 Coatings Produced by Magnetron Sputtering,” Surface and Coatings Technology, 97, pp 687–693.
   Web of Science ®Google Scholar
• Fox, V., Hampshire, J., and Teer, D. (1999), “MoS2/Metal Composite Coatings Deposited by Closed-Field Unbalanced Magnetron Sputtering: Tribological Properties and Industrial Uses,” Surface and Coatings Technology, 112, pp 118–122.
   Web of Science ®Google Scholar
• Renevier, N. M., Fox, V. C., Teer, D. G., and Hampshire, J. (2000) “Performance of Low Friction MoS₂/Ti Composite Coatings Used in Forming Applications,” Material and Design, 21, pp 337–343.
   Google Scholar
• Ding, X., Zeng, X. T., He, X. Y., and Chen, Z. (2010), “Tribological Properties of Cr- and Ti-Doped MoS2 Composite Coatings under Different Humidity Atmosphere,” Surface and Coatings Technology, 205, pp 224–231.
   Web of Science ®Google Scholar
• Fox, V. C., Renevier, N., Teer, D. G., Hampshire, J., and Rigato, V. (1999), “The Structure of Tribologically Improved MoS2–Metal Composite Coatings and Their Industrial Applications,” Surface and Coatings Technology, 116–119, pp 492–497.
   Web of Science ®Google Scholar
• Fouvry, S., Kapsa, P., Zahouani, H., and Vincent, L. (1997), “Wear Analysis in Fretting of Hard Coatings through a Dissipated Energy Concept,” Wear, 203–204, pp 393–403.
   Web of Science ®Google Scholar
• Kubart, T., Polcar, T., Kopecký, L., Novák, R., and Nováková, D. (2005), “Temperature Dependence of Tribological Properties of MoS2 and MoSe2 Coatings,” Surface and Coatings Technology, 193, pp 230–233.
   Web of Science ®Google Scholar
• Stoyanov, P., Chromik, R., and Goldbaum, D. (2010), “Microtribological Performance of Au-MoS2 and Ti-MoS2 Coatings with Varying Contact Pressure,” Tribology Letters, 40, pp 199–211.
   Web of Science ®Google Scholar
• Wieting, T. and Verble, J. (1971), “Infrared and Raman Studies of Long-Wavelength Optical Phonons in Hexagonal MoS2,” Physical Review B., 3, p 12.
   Web of Science ®Google Scholar
• Danyluk, M. and Dhingra, A. (2012), “Rolling Contact Fatigue Using Solid Thin Film Lubrication,” Wear, 274–275, pp 368–376.
   Web of Science ®Google Scholar
• Stoyanov, P., Strauss, H. W., and Chromik, R. R. (2012), “Scaling Effects between Micro- and Macro-Tribology for a Ti-MoS2 Coating,” Wear, 274–275, pp 149–161.
   Web of Science ®Google Scholar
• Hamilton, M. A., Alvarez, L. A., Mauntler, N. A., Argibay, N., Colbert, R., Burris, D. L., et al. (2008), “A Possible Link between Macroscopic Wear and Temperature Dependent Friction Behaviors of MoS2 Coatings,” Tribology Letters, 32, pp 91–98.
   Web of Science ®Google Scholar
• Huq, M. and Celis, J. (2002), “Expressing Wear Rate in Sliding Contacts Based on Dissipated Energy,” Wear, 252, pp 375–383.
   Web of Science ®Google Scholar
• Pope, L. E. and Panitz, J. K. G. (1988), “The Effect of Hertzian Stress and Test Atmospheres on the Friction Coefficients of MoS2 Coatings,” Surface and Coatings Technology, 36, pp 341–350.
   Web of Science ®Google Scholar