Frictional Behavior of a Wet Clutch Using Blends of Automatic Transmission Fluid (ATF) and Biolubricant (Jatropha Oil) in a Pin-on-Disk Tester

REFERENCES

• Sathwik, C. K. R., Jayadas, N. H., and Kailas, S. V. (2012), “Natural Oil-Based Lubricants,” Green Tribology, M. Nosonovsky and B. Bhushan (Eds.), Springer-Verlag: Berlin, pp 287–328.
   Google Scholar
• Fox, N. J. and Stachowiak, G. W. (2007), “Vegetable Oil-Based Lubricants,” Tribology International, 40, pp 1035–1046.
   Web of Science ®Google Scholar
• Gallardo, E. A. and Vite, M. “Friction and Wear of Jatropha curcas Oil Using a Four Balls Tester,” Unpublished.
   Google Scholar
• Krzan, B. and Vizintin, J. (2003), “Tribological Properties of an Environmental Adopted Universal Tractor Transmission Oil Based on Vegetable Oil,” Tribology International, 36, pp 827–833.
   Web of Science ®Google Scholar
• Nagendramma, P. and Kaul, S. (2012), “Development of Ecofriendly/Biodegradable Lubricants: An Overview,” Renewable and Sustainable Energy Reviews, 16, pp 764–774.
   Web of Science ®Google Scholar
• Cheenkachorn, K. and Fungtammasan, B. (2010), “Development of Engine Oil Using Palm Oil as a Base Stock for Four-Stroke Engines,” Energy, 35, pp 2552–2556.
   Web of Science ®Google Scholar
• Shashidhara, Y. M. and Jayaram, S. R. (2010), “Vegetable Oils as a Potential Cutting Fluid—An Evolution,” Tribology International, 43, pp 1073–1081.
   Web of Science ®Google Scholar
• Igartua, A., Fernández, X., and Areitioaurtena, O. (2009), “Biolubricants and Triboreactive Materials for Automotive Applications,” Tribology International, 42, pp 561–568.
   Web of Science ®Google Scholar
• Martinez, H. J. (2007), “El Piñon Mexicano: Una Alternativa Bioenergética para México [The Mexican Jatropha Seed: A Bioenergetic Alternative for Mexico],” Revista Digital Universitaria, 8, pp 12. Available online: http://www.revista.unam.mx/vol.8/num12/art88/int88.htm
   Google Scholar
• Chandra, P. V. and Singh, K. (2012), “Jatropha curcas: A Potential Biofuel Plant for Sustainable Environmental Development,” Renewable and Sustainable Energy Reviews, 16, pp 2870–2883.
   Web of Science ®Google Scholar
• Pioch, D., Largueze, C., Graille, J., Ajana, H., and Rouviere, J. (1998), “Towards an Efficient Membrane Based Vegetable Oils Refining,” Industrial Crops and Products, 7, pp 83–89.
   Web of Science ®Google Scholar
• Naunheimer, H., Bertsche, B., Ryborz, J., and Novak, W. (2010), Automotive Transmission Fundamentals, Design and Application, 2nd ed., Springer-Verlag: Berlin.
   Google Scholar
• Kugimiya, T., Yoshimura, N., and Mitusui, J. (1998), “Tribology of Automatic Transmission Fluid,” Tribology Letters, 5, pp 49–56.
   Web of Science ®Google Scholar
• Perry, A. W. (1999), “Automatic and Powershift Transmission Fluid Specifications, Differentiating OEM Requirement,” Transmission Fluids, Expertise and Marketing Performance, 4.8.
   Google Scholar
• Linden, J. L., Stebar, R. F., and Kemp, S. P. (1994), “Friction Characteristics of Dexron III Automatic Transmission Fluids,” SAE Technical Paper No. 941887.
   Google Scholar
• Zhao, H., Neville, A., Morina, A., Vickerman, R., and Durham, J. (2011), “Improved Anti-Shudder Performance of ATFs—Influence of a New Friction Modifier and Surface Chemistry,” Tribology International, 46, pp 62–72.
   Web of Science ®Google Scholar
• Ost, W., De Baets, P., and Degrieck, J. (2001), “The Tribological Behaviour of Paper Friction Plates for Wet Clutch Application Investigated on SAE #II and Pin-on-Disc Test Rigs,” Wear, 249, pp 361–371.
   Web of Science ®Google Scholar
• Mäki, R., Nyman, P., Olsson, R., and Ganemi, B. (2005), “Measurement and Characterization of Anti-Shudder Properties in Wet Clutch Application,” SAE Technical Paper No. 2005-01-0878.
   Google Scholar
• Ingram, M., Noles, J., Watts, R., Harris, S., and Spikes, H. A. (2010), “Frictional Properties of Automatic Transmission Fluids: Part I—Measurement of Friction Sliding Speed Behaviour,” Tribology Transactions, 54(1), pp 145–153.
   Web of Science ®Google Scholar
• Marklund, P. and Larsson, R. (2008), “Wet Clutch Friction Characteristics Obtained from Simplified Pin on Disc Test,” Tribology International, 41, pp 824–830.
   Web of Science ®Google Scholar
• Lingesten, N., Marklund, P., Höglund, E., and Lund, M. (2012), “Apparatus for Continuous Wear Measurements during Wet Clutch Durability Tests,” Wear, 288, pp 54–61.
   Web of Science ®Google Scholar
• Fujii, Y., Tobler, W. E., and Pietron, G. M. (2003), “Review of Wet Friction Component Models for Automatic Transmission Shift Analysis,” SAE Technical Paper No. 2003-01-1665.
   Google Scholar
• Mäki, R. (2005), Wet Clutch Tribology—Friction Characteristics in Limited Slip Differentials, Doctoral Thesis, Lulea University of Technology.
   Google Scholar
• Berglund, K. (2008), Lubricant Ageing Effects on Wet Clutch Friction Characteristics, Master's Thesis, Lulea University of Technology.
   Google Scholar
• G99-05. (2010), “Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus,” ASTM International: West Conshohocken, PA.
   Google Scholar
• Cruz, G. M. A., Gallardo, E. A., and Vite, T. M. (2013), “Rubber Steel Friction in Contaminated Contacts,” Wear, 302, pp 1421–1425.
   Web of Science ®Google Scholar
• Marklund, P., Mäki, R., Larsson, R., and Höglund, E. (2007), “Thermal Influence on Torque Transfer of Wet Clutch in Limited Slip Differential Applications,” Tribology International, 40, pp 876–884.
   Web of Science ®Google Scholar
• Ingram, M., Reddyhoff, T., and Spikes, H. A. (2011), “Thermal Behaviour of a Slipping Wet Clutch Contact,” Tribology Letters, 41, pp 23–32.
   Web of Science ®Google Scholar
• Roscommon Equipment Center-National Association of State Foresters. (2005), “Automatic Transmission Fluid Overheating: Solution to High Temperature Problems in Ford F-350 and F-450,” Roscommon Equipment Center, Michigan.
   Google Scholar
• Lingesten, N. (2012), Wear Behaviour of Wet Clutches, Licentiate Thesis in Machine Elements, Lulea University of Technology.
   Google Scholar
• Newcomb, T., Sparrow, M., and Ciupak, B. (2006), “Glaze Analysis of Friction Plates,” SAE Technical Paper No. 2006-01-3244.
   Google Scholar
• Salimon, J., Salih, N., and Yousif, E. (2012), “Industrial Development and Applications of Plant Oils and Their Biobased Oleochemicals,” Arabian Journal of Chemistry, 5, pp 135–145.
   Google Scholar
• Yi-Hung, C., Jhih-Hong, C., Yu-Min, L., Neng-Chou, S., Cheng-Hsin, C., Ching-Yuan, C., Pen-Chi, C., and Je-Lueng, S. (2011), “Property Modification of Jatropha Oil Biodiesel by Blending with Other Biodiesels or Adding Antioxidants,” Energy, 36, pp 4415–4421.
   Web of Science ®Google Scholar