Tribological Performances of Thermosetting Polyimide Matched with Steel and Ceramic

References

• Samyn, P. and Schoukens, G. (2008), “The Effect of Processing Method on Dry Sliding Performance of Polyimides at High Load/High Velocity Conditions,” European Polymer Journal, 44, pp 716–732.
   Web of Science ®Google Scholar
• Soriano, B. L., Gardos, M. N., and Buller, B. W. (1993), “Polyimide Composite Retainer Materials Optimized for Minimal Wear and Film Transfer,” Tribology Transactions, 36, pp 670–678.
   Web of Science ®Google Scholar
• Fusaro, R. J. and Sliney, H. E. (1973), “Lubricating Characteristics of Polyimide Bonded Graphite Fluoride and Polyimide Thin Films,” Tribology Transactions, 16, pp 189–196.
   Google Scholar
• Samyn, P., De Baets, P., and Schoukens, G. (2010), “Role of Internal Additives in the Friction and Wear of Carbon-Fiber-Reinforced Polyimide,” Journal of Applied Polymer Science, 116, pp 1146–1156.
   Web of Science ®Google Scholar
• Rubin, A., Gauthier, C., and Schirrer, R. (2013), “Analysis of the Effect of Nano-Roughness on the Friction of a Vitreous Polymer,” Wear, 303, pp 40–48.
   Web of Science ®Google Scholar
• Pei, X. and Wang, Q. (2007), “Effect of Electron Radiation on the Tribological Properties of Polyimide,” Tribology Transactions, 50, pp 268–272.
   Web of Science ®Google Scholar
• Li, J. and Xu, Z. S. (2010), “Effect of Surface Oxidation Treatment on the Tribological Performance of Carbon Fiber Reinforced Polyimide Composites,” Materialwissenschaft und Werkstofftechnik, 41, pp 106–110.
   Web of Science ®Google Scholar
• Zhang, X. R., Pei, X. Q., and Wang, Q. H. (2009), “The Tribological Properties of Acid- and Diamine-Modified Carbon Fiber Reinforced Polyimide Composites,” Materials Chemistry and Physics, 115, pp 825–830.
   Web of Science ®Google Scholar
• Zhang, X. R., Pei, X. Q., and Wang, Q. H. (2009), “Friction and Wear Studies of Polyimide Composites Filled with Short Carbon Fibers and Graphite and Micro SiO2,” Materials & Design, 30, pp 4414–4420.
   Web of Science ®Google Scholar
• Shi, Y. J., Mu, L. W., Feng, X., and Lu, X. H. (2011), “The Tribological Behavior of Nanometer and Micrometer TiO2 Particle-Filled Polytetrafluoroethylene/Polyimide,” Materials & Design, 32, pp 964–970.
   Web of Science ®Google Scholar
• Wang, Q. H., Xu, J. F., Shen, W. C., and Liu, W. M. (1996), “An Investigation of the Friction and Wear Properties of Nanometer Si3N4 Filled PEEK,” Wear, 196, pp 82–86.
   Web of Science ®Google Scholar
• Wang, Y. X., Li, J. L., Wang, L. P., Chen, J. M., and Xue, Q. J. (2013), “Tribological Performances of Graphite-Like Carbon Films Coupled to Different Ceramics in Ambient Air and Water,” Tribology Transactions, 56, pp 333–341.
   Web of Science ®Google Scholar
• Wang, Y. X., Wang, L. P., and Xue, Q. J. (2011), “Improvement in the Tribological Performances of Si3N4, SiC and WC by Graphite-Like Carbon Films under Dry and Water-Lubricated Sliding Conditions,” Surface and Coatings Technology, 205, pp 2770–2777.
   Web of Science ®Google Scholar
• Kim, S. S., Chae, Y. H., and Kim, D. J. (2000), “Tribological Characteristics of Silicon Nitride at Elevated Temperatures,” Tribology Letters, 9, pp 227–232.
   Web of Science ®Google Scholar
• Liang, H. X., Lu, J. J., Liu, W. M., and Xue, Q. J. (2004), “Study on Self-Lubrication Ceramic of Y-TZP/MoS2,” Journal of Inorganic Materials, 19, pp 207–213.
   Web of Science ®Google Scholar
• Liu, H. W., and Xue, Q. J. (1996), “Tribology of Ceramics II. Lubrication of Ceramics,” Tribology, 16, pp 184–192.
   Google Scholar
• Bahadur, S. (2000), The Development of Transfer Layers and Their Role in Polymer Tribology,” Wear, 245, pp 92–99.
   Web of Science ®Google Scholar
• Balaji, V., Tiwari, A. N., and Goyal, R. K. (2011), “Fabrication and Properties of High Performance PEEK/Si3N4 Nanocomposites,” Journal of Applied Polymer Science, 119, pp 311–318.
   Web of Science ®Google Scholar
• Wang, Y. M., Wang, T. M., and Wang, Q. H. (2014), “Effect of Molecular Weight on Tribological Properties of Thermosetting Polyimide under High Temperature,” Tribology International, 78, pp 47–59.
   Web of Science ®Google Scholar
• Huang, T., Liu, P., Lu, R., Huang, Z., Chen, H., and Li, T. S. (2012), “Modification of Polyetherimide by Phenylethynyl Terminated Agent for Improved Tribological, Macro- and Micro-Mechanical Properties,” Wear, 292–293, pp 25–32.
   Web of Science ®Google Scholar
• Huang, T., Li, T. S., Xin, Y., Liu, P., and Su, C. (2013), “Mechanical and Tribological Properties of Hybrid Fabric–Modified Polyetherimide Composites,” Wear, 306, pp 64–72.
   Web of Science ®Google Scholar
• Gong, D. L. and Bahadur, S. (1993), “The Transfer and Wear of Nylon and CuS-Nylon Composites: Proportion and Counterface Characteristics,” Wear, 162/164, pp 397–406.
   Web of Science ®Google Scholar
• Cui, L., Lu, Z., and Wang, L. (2013), “Toward Low Friction in High Vacuum for Hydrogenated Diamondlike Carbon by Tailoring Sliding Interface,” Applied Material Interfaces, 5, pp 5889–5893.
   PubMed Web of Science ®Google Scholar
• Erck, R. A. (1994), “Pull-Test Adhesion Measurements of Diamondlike Carbon Films on Silicon Carbide, Silicon Nitride, Aluminum Oxide, and Zirconium Oxide,” Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 12, pp 1583–1586.
   Web of Science ®Google Scholar