Texture Shape Optimization for Seal-Like Parallel Surfaces: Theory and Experiment

References

• Xiao, N., Zhang, Q., Ligrani, P. M., and Mongia, R. (2009), “Thermal Performance of Dimpled Surfaces in Laminar Flows,” International Journal of Heat Mass Transfer, 52, pp 2009–2017.
   Web of Science ®Google Scholar
• Xiao, N., and Khonsari, M. M. (2012), “Thermal Performance of Mechanical Seals with Textured Side-Wall,” Tribology International, 45, pp 1–7.
   Web of Science ®Google Scholar
• Etsion, I. (2004), “Improving Tribological Performance of Mechanical Components by Laser Surface Texturing,” Tribology Letters, 17, pp 733–737.
   Web of Science ®Google Scholar
• Etsion, I. and Kligerman, Y. (1999), “Analytical and Experimental Investigation of Laser-Textured Mechanical Seal Faces,” Tribology Transactions, 42(3), pp 511–516.
   Web of Science ®Google Scholar
• Wang, X., Kato, K., Adachi, K., and Aizawa, K. (2003), “Loads Carrying Capacity Map for the Surface Texture Design of SiC Thrust Bearing Sliding in Water,” Tribology International, 36, pp 189–197.
   Web of Science ®Google Scholar
• Yan, D., Qu, N., Li, H., and Wang, X. (2010), “Significance of Dimple Parameters on the Friction of Sliding Surfaces Investigated by Orthogonal Experiments,” Tribology Transactions, 53, pp 703–712.
   Web of Science ®Google Scholar
• Kovalchenko, A., Ajayi, O., Erdemir, A., Fenske, G., and Etsion, I. (2005), “The Effect of Laser Surface Texturing on Transitions in Lubrication Regimes during Unidirectional Sliding Contact,” Tribology International, 38, pp 219–225.
   Web of Science ®Google Scholar
• Talalghil, N., Fillon, M., and Maspeyrot, P. (2011), “Effect of Textured Area on the Performances of a Hydrodynamic Journal Bearing,” Tribology International, 44, pp 211–219.
   Web of Science ®Google Scholar
• Qiu, Y. and Khonsari, M. M. (2011), “Performance Analysis of Full-Film Textured Surfaces with Consideration of Roughness Effects,” Journal of Tribology, 133, pp 1–10.
   Web of Science ®Google Scholar
• Qiu, Y. and Khonsari, M. M. (2011), “Experimental Investigation of Tribological Performance of Laser Textured Stainless Steel Rings,” Tribology International, 44, pp 635–644.
   Web of Science ®Google Scholar
• Shen, C. and Khonsari, M. M. (2013), “Effect of Dimple's Internal Structure on Hydrodynamic Lubrication,” Tribology Letters, 52, pp 415–430.
   Web of Science ®Google Scholar
• Wang, X., Wang, J., Zhang, B., and Huang, W. (2014), “Design Principles for the Area Density of Dimple Patterns,” Proceedings of the Institution of Mechanical Engineers - Part J: Journal of Engineering Tribology, 229, pp 538–546.
   Web of Science ®Google Scholar
• Ibatan, T., Uddin, M. S., and Chowdhury, M. A. K. (2015), “Recent Development on Surface Texturing in Enhancing Tribological Performance of Bearing Sliders,” Surface & Coatings Technology, 272, pp 102–120.
   Web of Science ®Google Scholar
• Lu, X. and Khonsari, M. M. (2007), “An Experimental Investigation of Dimple Effect on the Stribeck Curve of Journal Bearings,” Tribology Letters, 27, pp 169–176.
   Web of Science ®Google Scholar
• Galda L., Pawlus, P., and Sep, J. (2009), “Dimples Shape and Distribution Effect on Characteristics of Stribeck Curve,” Tribology International, 42, pp 1505–1512.
   Web of Science ®Google Scholar
• Yu, H., Wang, X., and Zhou, F. (2010), “Geometric Shape Effects of Surface Texture on the Generation of Hydrodynamic Pressure between Conformal Contacting Surfaces,” Tribology Letters, 37, pp 123–130.
   Web of Science ®Google Scholar
• Zhang, J. and Meng, Y. (2012), “Optimal Design of Surface Texture in Parallel Thrust Bearings,” Journal of Mechanical Engineering, 48(17), pp 91–99.
   Google Scholar
• Rahmani, R., Shirvani, A., and Shirvani, H. (2007), “Optimization of Partially Textured Parallel Thrust Bearings with Square-Shaped Micro-Dimples,” Tribology Transactions, 50, pp 401–406.
   Web of Science ®Google Scholar
• Qiu, M., Delic, A., and Raeymaekers, B. (2012), “The Effect of Texture Shape on the Load Carrying Capacity of Gas Lubricated Parallel Slider Bearings,” Tribology Letters, 48(3), pp 315–328.
   Web of Science ®Google Scholar
• Qiu, M., Minson, B., and Raeymaekers, B. (2013), “The Effect of Texture Shape on the Friction Coefficient and Stiffness of Gas Lubricated Parallel Slider Bearings,” Tribology International, 67, pp 278–288.
   Web of Science ®Google Scholar
• Shen, C. and Khonsari, M. M. (2015), “Numerical Optimization of Texture Shape for Parallel Surfaces under Unidirectional and Bidirectional Sliding,” Tribology International, 82, pp 1–11.
   Web of Science ®Google Scholar
• Fesanghary, M. and Khonsari, M. M. (2013), “On the Optimum Groove Shapes for Load-Carrying Capacity Enhancement in Parallel Flat Surface Bearings: Theory and Experiment,” Tribology International, 67, pp 254–262.
   Web of Science ®Google Scholar
• Thorson, J. (1979), Gaussian Elimination on a Banded Matrix, Stanford University: Stanford, CA.
   Google Scholar
• Qiu, Y. and Khonsari, M. M. (2009), “On the Prediction of Cavitation in Dimples Using a Mass-Conservative Algorithm,” Journal of Tribology, 131, pp 1–11.
   Web of Science ®Google Scholar
• Spellucci, P. (1998), “An SQP Method for General Nonlinear Programs Using Only Equality Constrained Subproblems,” Mathematical Programming, 82(3), pp 413–448.
   Web of Science ®Google Scholar
• Lu, X. and Khonsari, M. M. (2005), “On the Lift-Off Speed in Journal Bearings,” Tribology Letters, 20, pp 299–305.
   Web of Science ®Google Scholar
• Lebeck, A. O. (1987), “Parallel Sliding Load Support in the Mixed Friction Regime, Part 1: The Experimental Data,” Journal of Tribology, 109, pp 189–195.
   Web of Science ®Google Scholar
• Lebeck, A. O. (1987), “Parallel Sliding Load Support in the Mixed Friction Regime, Part 2: Evaluation of the Mechanisms,” Journal of Tribology, 109, pp 196–205.
   Web of Science ®Google Scholar
• Yang, P. and Kaneta, M. (2013), “Thermal Wedge in Lubrication,” Encyclopedia of Tribology, Wang, Q. Jane and Chung, Y.W. (Eds.),pp 3617–3622, Springer, New York.
   Google Scholar
• Brunetiere, N. and Tournerie, B. (2012), “Numerical Analysis of a Surface-Textured Mechanical Seal Operating in Mixed Lubrication Regime,” Tribology International, 49, pp 80–89.
   Web of Science ®Google Scholar