References
- Prakash, R., Anandavel, K., and Balasubramani, P. (2011), “An Overview of Fretting Aspects Relating to Aero-Engine Dovetail Attachment,” ICAF 2011 Structural Integrity: Influence of Efficiency and Green Imperatives, Springer, The Netherlands, pp 697–720.
- Lee, Y.-H., Kim, H.-K., Kim, H.-D., Park, C.-Y., and Kim, I.-S. (2003), “A Comparative Study on the Fretting Wear of Steam Generator Tubes in Korean Power Plants,” Wear, 255(7–12), pp 1198–1208.
- Zhu, M. H. and Zhou, Z. R. (2011), “On the Mechanisms of Various Fretting Wear Modes,” Tribology International, 44(11), pp 1378–1388.
- Jeon, H.-G. and Lee, Y.-Z. (2013), “The Evaluation of Wear Life Based on Accelerated Test through Analysis of Correlation between Wear Rate and Lubricant Film Parameter,” Tribology Transactions, 56(2), pp 290–300.
- Su, T., Han, X., Wang, Y., Yin, M., Liang, C., and An, J. (2015), “An Investigation on Subsurface Microstructural Evolution and Mild to Severe Wear Transition in AZ51 Magnesium Alloy,” Tribology Transactions, 58(3), pp 549–559.
- Liu, Y., Jin, B., Shao, S., Li, D., Zeng, X., and Xu, C. (2014), “Dry Sliding Wear Behavior of Mg-Zn-Gd Alloy before and after Cryogenic Treatment,” Tribology Transactions, 57(2), pp 275–282.
- Majzoobi, G. and Minaii, K. (2014), “Fretting Fatigue Life Estimation of Al 7075-T6 Using Plain Fatigue Test,” Tribology Transactions, 57(4), pp 613–621.
- Zafar, S. and Sharma, A. K. (2015), “On Friction and Wear Behaviour of Wc-12Co Microwave Clad,” Tribology Transactions, 58(4), pp. 584–591.
- Mindlin, R. D. and Deresiewica, H. “Elastic Spheres in Contact under Varying Oblique Forces,” Journal of Applied Mechanics, 20(3), pp. 327–344.
- Fouvry, S., Duó, P., and Perruchaut, P. (2004), “A Quantitative Approach of Ti–6Al–4 V Fretting Damage: Friction, Wear and Crack Nucleation,” Wear, 257(9–10), pp 916–929.
- Leonard, B. D., Sadeghi, F., Shinde, S., and Mittelbach, M. (2012), “A Numerical and Experimental Investigation of Fretting Wear and a New Procedure for Fretting Wear Maps,” Tribology Transactions, 55(3), pp 313–324.
- Carpenter, C. E. G., Hull, A., and Oberson, G. (2012), “Overview of NRC Proactive Management of Materials Degradation of Materials (PMMD) Program”, 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, John Wiley & Sons, Inc New York, pp. 1–9.
- Helmi Attia, M. (2006), “Fretting Fatigue and Wear Damage of Structural Components in Nuclear Power Stations—Fitness for Service and Life Management Perspective,” Tribology International, 39(10), pp 1294–1304.
- Kim, D.-G. and Lee, Y.-Z. (2001), “Experimental Investigation on Sliding and Fretting Wear of Steam Generator Tube Materials,” Wear, 250(11–12), pp 673–680.
- Zhang, Y. S., Han, Z., and Lu, K. (2008), “Fretting Wear Behavior of Nanocrystalline Surface Layer of Copper under Dry Condition,” Wear, 265(3–4), pp 396–401.
- Li, J., Lu, Y., Zhang, H., and Xin, L. (2015), “Effect of Grain Size and Hardness on Fretting Wear Behavior of Inconel 600 Alloys,” Tribology International, 81, pp 215–222.
- Zhang, H. Y., Lu, Y. H., Ma, M., and Li, J. (2014), “Effect of Precipitated Carbides on the Fretting Wear Behavior of Inconel 600 Alloy,” Wear, 315(1–2), pp 58–67.
- Hong, J.-K., Kim, I.-S., Park, C.-Y., and Kim, E.-S. (2005), “Microstructural Effects on the Fretting Wear of Inconel 690 Steam Generator Tube,” Wear, 259(1–6), pp 349–355.
- Li, J. and Lu, Y. H. (2013), “Effects of Displacement Amplitude on Fretting Wear Behaviors and Mechanism of Inconel 600 Alloy,” Wear, 304(1–2), pp 223–230.
- Rybiak, R., Fouvry, S., and Bonnet, B. (2010), “Fretting Wear of Stainless Steels under Variable Temperature Conditions: Introduction of a ‘Composite’ Wear Law,” Wear, 268(3–4), pp 413–423.
- Cruzado, A., Hartelt, M., Wäsche, R., Urchegui, M. A., and Gómez, X. (2010), “Fretting Wear of Thin Steel Wires. Part 1: Influence of Contact Pressure,” Wear, 268(11–12), pp 1409–1416.
- Li, B. and Tin, S. (2014), “The Role of Deformation Temperature and Strain on Grain Boundary Engineering of Inconel 600,” Materials Science & Engineering A, 603(5), pp 104–113.
- Arafin, M. A. and Szpunar, J. A. (2009), “A New Understanding of Intergranular Stress Corrosion Cracking Resistance of Pipeline Steel through Grain Boundary Character and Crystallographic Texture Studies,” Corrosion Science, 51(1), pp 119–128.
- Sauger, E., Fouvry, S., Ponsonnet, L., Kapsa, P., Martin, J. M., and Vincent, L. (2000), “Tribologically Transformed Structure in Fretting,” Wear, 245(1–2), pp 39–52.
- Descartes, S., Busquet, M., and Berthier, Y. (2011), “An Attempt to Produce ex situ TTS to Understand Their Mechanical Formation Conditions—The Case of an Ultra High Purity Iron,” Wear, 271(9–10), pp 1833–1841.