Effect of Cold Rolling on the Fretting Wear Behavior and Mechanism in Inconel 600 Alloy

References

• Prakash, R., Anandavel, K., and Balasubramani, P. (2011), “An Overview of Fretting Aspects Relating to Aero-Engine Dovetail Attachment,” ICAF 2011 Structural Integrity: Influence of Efficiency and Green Imperatives, Springer, The Netherlands, pp 697–720.
   Google Scholar
• Lee, Y.-H., Kim, H.-K., Kim, H.-D., Park, C.-Y., and Kim, I.-S. (2003), “A Comparative Study on the Fretting Wear of Steam Generator Tubes in Korean Power Plants,” Wear, 255(7–12), pp 1198–1208.
   Web of Science ®Google Scholar
• Zhu, M. H. and Zhou, Z. R. (2011), “On the Mechanisms of Various Fretting Wear Modes,” Tribology International, 44(11), pp 1378–1388.
   Web of Science ®Google Scholar
• Jeon, H.-G. and Lee, Y.-Z. (2013), “The Evaluation of Wear Life Based on Accelerated Test through Analysis of Correlation between Wear Rate and Lubricant Film Parameter,” Tribology Transactions, 56(2), pp 290–300.
   Web of Science ®Google Scholar
• Su, T., Han, X., Wang, Y., Yin, M., Liang, C., and An, J. (2015), “An Investigation on Subsurface Microstructural Evolution and Mild to Severe Wear Transition in AZ51 Magnesium Alloy,” Tribology Transactions, 58(3), pp 549–559.
   Web of Science ®Google Scholar
• Liu, Y., Jin, B., Shao, S., Li, D., Zeng, X., and Xu, C. (2014), “Dry Sliding Wear Behavior of Mg-Zn-Gd Alloy before and after Cryogenic Treatment,” Tribology Transactions, 57(2), pp 275–282.
   Web of Science ®Google Scholar
• Majzoobi, G. and Minaii, K. (2014), “Fretting Fatigue Life Estimation of Al 7075-T6 Using Plain Fatigue Test,” Tribology Transactions, 57(4), pp 613–621.
   Web of Science ®Google Scholar
• Zafar, S. and Sharma, A. K. (2015), “On Friction and Wear Behaviour of Wc-12Co Microwave Clad,” Tribology Transactions, 58(4), pp. 584–591.
   Google Scholar
• Mindlin, R. D. and Deresiewica, H. “Elastic Spheres in Contact under Varying Oblique Forces,” Journal of Applied Mechanics, 20(3), pp. 327–344.
   Web of Science ®Google Scholar
• Fouvry, S., Duó, P., and Perruchaut, P. (2004), “A Quantitative Approach of Ti–6Al–4 V Fretting Damage: Friction, Wear and Crack Nucleation,” Wear, 257(9–10), pp 916–929.
   Web of Science ®Google Scholar
• Leonard, B. D., Sadeghi, F., Shinde, S., and Mittelbach, M. (2012), “A Numerical and Experimental Investigation of Fretting Wear and a New Procedure for Fretting Wear Maps,” Tribology Transactions, 55(3), pp 313–324.
   Web of Science ®Google Scholar
• Carpenter, C. E. G., Hull, A., and Oberson, G. (2012), “Overview of NRC Proactive Management of Materials Degradation of Materials (PMMD) Program”, 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactors, John Wiley & Sons, Inc New York, pp. 1–9.
   Google Scholar
• Helmi Attia, M. (2006), “Fretting Fatigue and Wear Damage of Structural Components in Nuclear Power Stations—Fitness for Service and Life Management Perspective,” Tribology International, 39(10), pp 1294–1304.
   Web of Science ®Google Scholar
• Kim, D.-G. and Lee, Y.-Z. (2001), “Experimental Investigation on Sliding and Fretting Wear of Steam Generator Tube Materials,” Wear, 250(11–12), pp 673–680.
   Google Scholar
• Zhang, Y. S., Han, Z., and Lu, K. (2008), “Fretting Wear Behavior of Nanocrystalline Surface Layer of Copper under Dry Condition,” Wear, 265(3–4), pp 396–401.
   Web of Science ®Google Scholar
• Li, J., Lu, Y., Zhang, H., and Xin, L. (2015), “Effect of Grain Size and Hardness on Fretting Wear Behavior of Inconel 600 Alloys,” Tribology International, 81, pp 215–222.
   Web of Science ®Google Scholar
• Zhang, H. Y., Lu, Y. H., Ma, M., and Li, J. (2014), “Effect of Precipitated Carbides on the Fretting Wear Behavior of Inconel 600 Alloy,” Wear, 315(1–2), pp 58–67.
   Web of Science ®Google Scholar
• Hong, J.-K., Kim, I.-S., Park, C.-Y., and Kim, E.-S. (2005), “Microstructural Effects on the Fretting Wear of Inconel 690 Steam Generator Tube,” Wear, 259(1–6), pp 349–355.
   Web of Science ®Google Scholar
• Li, J. and Lu, Y. H. (2013), “Effects of Displacement Amplitude on Fretting Wear Behaviors and Mechanism of Inconel 600 Alloy,” Wear, 304(1–2), pp 223–230.
   Web of Science ®Google Scholar
• Rybiak, R., Fouvry, S., and Bonnet, B. (2010), “Fretting Wear of Stainless Steels under Variable Temperature Conditions: Introduction of a ‘Composite’ Wear Law,” Wear, 268(3–4), pp 413–423.
   Web of Science ®Google Scholar
• Cruzado, A., Hartelt, M., Wäsche, R., Urchegui, M. A., and Gómez, X. (2010), “Fretting Wear of Thin Steel Wires. Part 1: Influence of Contact Pressure,” Wear, 268(11–12), pp 1409–1416.
   Web of Science ®Google Scholar
• Li, B. and Tin, S. (2014), “The Role of Deformation Temperature and Strain on Grain Boundary Engineering of Inconel 600,” Materials Science & Engineering A, 603(5), pp 104–113.
   Google Scholar
• Arafin, M. A. and Szpunar, J. A. (2009), “A New Understanding of Intergranular Stress Corrosion Cracking Resistance of Pipeline Steel through Grain Boundary Character and Crystallographic Texture Studies,” Corrosion Science, 51(1), pp 119–128.
   Web of Science ®Google Scholar
• Sauger, E., Fouvry, S., Ponsonnet, L., Kapsa, P., Martin, J. M., and Vincent, L. (2000), “Tribologically Transformed Structure in Fretting,” Wear, 245(1–2), pp 39–52.
   Web of Science ®Google Scholar
• Descartes, S., Busquet, M., and Berthier, Y. (2011), “An Attempt to Produce ex situ TTS to Understand Their Mechanical Formation Conditions—The Case of an Ultra High Purity Iron,” Wear, 271(9–10), pp 1833–1841.
   Web of Science ®Google Scholar