References
- Ravindran, P., Manisekar, K., Narayanasamy, P., Selvakumar, N., and Narayanasamy, R. (2012), “Application of Factorial Techniques to Study the Wear of Al Hybrid Composites with Graphite Addition,” Materials & Design, 39, pp 42–54.
- Tjong, S. C. and Ma, Z. Y. (2000), “Microstructural and Mechanical Characteristics of Composites,” Materials Science & Engineering, 29, pp 49–113.
- Kato, H., Takama, M., Iwai, Y., Washida, K., and Sasaki, Y. (2003), “Wear and Mechanical Properties of Sintered Copper–Tin Composites Containing Graphite or Molybdenum Disulfide,” Wear, 255, pp 573–578.
- Tsuya, Y., Shimura, H., and Umeda, K. (1972), “A Study of the Properties of Copper and Copper–Tin Base Self Lubricating Composites,” Wear, 22, pp 143–162.
- Ramesh, C. S., Noor Ahmed, R., Mujeebu, M. A., and Abdullah, M. Z. (2009), “Development and Performance Analysis of Novel Cast Copper-SiC-Gr Hybrid Composites,” Materials & Design, 30, pp 1957–1965.
- Watanabe, Y. (2008), “High-Speed Sliding Characteristics of Cu-Sn-Based Composite Materials Containing Lamellar Solid Lubricants by Contact Resistance Studies,” Wear, 264, pp 624–631.
- Moustafa, S. F., El-Badry, S. A., Sanad, A. M., and Kieback, B. (2002), “Friction and Wear of Copper–Graphite Composites Made with Cu-Coated and Uncoated Graphite Powders,” Wear, 253, pp 699–710.
- Chen, S.-x., Feng, Y., Li, S., and Xie, Y.-j. (2008), “Influences of MoS2 Contents on Sintering Process and Properties of Cu-MoS2 Composites,” Journal of Materials Science & Engineering, 2, pp 7–12.
- Senthil Kumar, P., Manisekar, K., Subramanian, E., and Narayanasamy, R. (2013), “Dry Sliding Friction and Wear Characteristics of Cu-Sn Alloy Containing Molybdenum Disulfide,” Tribology Transactions, 56, pp 857–866.
- Song, M. and He, Y.-h. (2010), “Effects of Die-Pressing Pressure and Extrusion on the Microstructures and Mechanical Properties of SiC Reinforced Pure Aluminum Composite,” Materials & Design, 31, pp 985–989.
- Nakae, H. and Wu, S. (1998), “Engulfment of Al203 Particles during Solidification of Aluminum Matrix Composites,” Materials Science & Engineering A, 252, pp 232–238.
- Xiao, L., Lu, W. J., Yang, Z. F., Qin, J. N., and Zhang, D. (2008), “Effect of Reinforcements on High Temperature Mechanical Properties of in situ Synthesized Titanium Matrix Composites,” Materials Science & Engineering A, 491, pp 192–198.
- Srivatsan, T. S., Soboyejo, W. O., and Lederich, R. J. (1997), “Tensile Deformation and Fracture Behaviors of a Titanium-Alloy Metal-Matrix Composite,” Composites Part A, 28, pp 365–376.
- Ramesh, C. S., Adarsha, H., Harishanad, K. S., and Naveen Prakash, N. (2012), “A Review on Hot Extrusion of Metal Matrix Composites (MMC's),” International Journal of Engineering and Science, 1, pp 30–35.
- Bahrami, A., Razaghian, A., Emamy, M., and Khorshidi, R. (2012), “The Effect of Zr on the Microstructure and Tensile Properties of Hot-Extruded Al-Mg 2 Si Composite,” Materials & Design, 36, pp 323–330.
- Vettivel, S. C., Selvakumar, N., and Leema, N. (2013), “Experimental and Prediction of Sintered Cu-W Composite by Using Artificial Neural Networks,” Materials & Design, 45, pp 323–335.
- Chen, W., Wang, Y., Zhang, L., Feng, C., and Zhou, K. (2015), “The Effect of Hot Extrusion on Mechanical and Tribological Behavior of Ag-Cu/MoS2 Composites,” Tribology Transactions, 59(2), pp 375–384.
- ASTM G99-05. (2010), American Society for Testing and Materials.
- Niu, Q. L., Zheng, X. H., Ming, W. W., and Chen, M. (2013), “Friction and Wear Performance of Titanium Alloys against Tungsten Carbide under Dry Sliding and Water Lubrication,” Tribology Transactions, 56(1), pp 101–108.
- Rajkumar, K. and Aravindan, S. (2011), “Tribological Performance of Microwave Sintered Copper-TiC-Graphite Hybrid Composites,” Tribology International, 44, pp 347–358.
- Uyyuru, R. K., Surappa, M. K., and Brusethaug, S. (2007), “Tribological Behavior of Al-Si-SiCp Composites/Automobile Brake Pad System under Dry Sliding Conditions,” Tribology International, 40, pp 365–373.
- Öztürk, B., Arslan, F., and Öztürk, S. (2013), “Effects of Different Kinds of Fibers on Mechanical and Tribological Properties of Brake Friction Materials,” Tribology Transactions, 56(4), pp 536–545.
- Wilson, S. and Alphas, A. T. (1997), “Wear Mechanism Maps for Metal Matrix Composites,” Wear, 212, pp 41–49.
- Xu, J., Yu, H., Xia, L., Li, X., and Yang, H. (2004), “Effects of Some Factors on the Tribological Properties of the Short Carbon Fiber–Reinforced Copper Composite,” Materials & Design, 25, pp 489–493.
- Basvarajappa, S., Chandramohan, G., Mahadevan, A., Thangavelu, M., Subramanian, R., and Gopalakrishnan, P. (2007), “Influence of Sliding Speed on the Dry Sliding Wear Behavior and the Subsurface Deformation on Hybrid Metal Matrix,” Wear, 262, pp 1007–1012.
- Xiong, X., Chen, J., Yao, P., Li, S., and Huang, B. (2007), “Friction and Wear Behaviors and Mechanisms of Fe and SiO2 in Cu-Based P/M Friction Materials,” Wear, 262, pp 1182–1186.
- Qiang, Y. H., Ge, S. R., and Xue, Q. J. (1999), “Microstructure and Tribological Behavior of Nitrocarburizing–Quenching Duplex Treated Steel,” Tribology International, 32, pp 131–136.
- Abouei, V., Saghafian, H., and Kheirandish, Sh. (2007), “Dry Sliding Oxidative Wear in Plain Carbon Dual Phase Steel,” Journal of Iron and Steel Research International, 14, pp 43–48.
- Taghiabadi, R., Ghasemi, H. M., and Shabestari, S. G. (2008), “Effect of Iron-Rich Intermetallics on the Sliding Wear Behavior of Al-Si Alloys,” Materials Science & Engineering A, 490, pp 162–170.