The Influence of W-DLC and Cr_xN Thin Film Coatings on Impact Damage between Bearing Materials

References

• Evans, R. D. (2013), “Wear of Bearings,” Encyclopedia of Tribology, Wang, Q. J., and Chung, Y. W. (Eds.), pp 4061–4068, Springer Science and Business Media: New York.
   Google Scholar
• DellaCorte, C. (2014), “The Effect of Indenter Ball Radius on the Static Load Capacity of the Superelastic 60NiTi for Rolling Element Bearings,” NASA TM 216627.
   Google Scholar
• DellaCorte, C. (2013), “The Effect of Pre-Stressing on the Static Indentation Load Capacity of the Superelastic 60NiTi,” NASA TM 216479.
   Google Scholar
• Tandon, N. and Choudhury, A. (1999), “A Review of Vibration and Acoustic Measurement Methods for the Detection of Defects in Rolling Element Bearings,” Tribology International, 32(8), pp 469–480.
   Web of Science ®Google Scholar
• McFadden, P. D. and Smith, J. D. (1984), “Vibration Monitoring of Rolling Element Bearings by the High-Frequency Resonance Technique—A Review,” Tribology International, 17(1), pp 3–10.
   Web of Science ®Google Scholar
• Nikolaou, N. G. and Antoniadis, I. A. (2002), “Demodulation of Vibration Signals Generated by Defects in Rolling Element Bearings Using Complex Shifted Morlet Wavelets,” Mechanical Systems and Signal Processing, 16(4), pp 677–694.
   Web of Science ®Google Scholar
• Leveille, A. R., and Murphy, J. J. (1973), “Determination of the Influence of Static Loads on the Output Torque of Instrument Ball Bearings,” Charles Stark Draper Lab International Ball Bearings Symposium, Cambridge, MA, June 5–7, 1973.
   Google Scholar
• Park, W., Hilton, M. R., and Leville, A. R. (1999), “Microstructure, Fatigue Life, and Load Capacity of PM Tool Steel REX20 for Bearing Applications,” Lubrication Engineering, 55(6), pp 20–30.
   Google Scholar
• Evans, R. D., Barr, T. A., Houpert, L., and Boyd, S. V. (2013), “Prevention of Smearing Damage in Cylindrical Rolling Element Bearings,” Tribology Transactions, 56, pp 703–716.
   Web of Science ®Google Scholar
• DellaCorte, C., Stanford, M. K., Thomas, F., and Edmonds, B. J. (2010), “The Effect of Composition on the Surface Finish of PS400: A New High Temperature Solid Lubricant Coating,” NASA TM-2010-216774.
   Google Scholar
• Donnet, C. (1996), “Advanced Solid Lubricant Coatings for High Vacuum Environments,” Surface and Coatings Technology, 80, pp 151–156.
   Web of Science ®Google Scholar
• Gamulya, G. D., Kopteva, T. A., Lebedeva, I. L., and Senturikhina, L. N. (1993), “Effect of Low Temperatures on the Wear Mechanism of Solid Lubricant Coatings in Vacuum,” Wear, 160, pp 351–359.
   Web of Science ®Google Scholar
• Hilton, M. R. and Fleischauer, P. D. (1992), “Applications of Solid Lubricant Films in Spacecraft,” Surface and Coatings Technology, 54/55, pp 435–441.
   Web of Science ®Google Scholar
• Lund, C. J., Persad, C., and Eliezer, Z. (1987), “Solid Lubricant Coatings Using Electromagmetic Railgun Acceleration,” Wear, 119, pp 251–255.
   Web of Science ®Google Scholar
• Dougherty, P. S. M., Sunday, C. M., and Higgs, C. F., III. (2012), “Adaptive Solid Lubricant Transfer Films for Conductivity and Oxidation Control,” ASME/STLE 2012 International Joint Tribology Conference, Denver, CO, October 7, 2012, pp 119–121.
   Google Scholar
• Dougherty, P. S. M., Pudjoprawoto, R., and Higgs, C. F., III. (2011), “An Investigation of the Wear Mechanism Leading to Self-Replenishing Transfer Films,” Wear, 272(1), pp 122–132.
   Web of Science ®Google Scholar
• Wornyoh, E. Y. A., Jasti, V. K., and Higgs, C. F., III. (2007), “A Review of Dry Particulate Lubrication: Powder and Granular Materials,” Journal of Tribology, 129(2), pp 438–449.
   Web of Science ®Google Scholar
• Winer, W. O. (1967), “Molybdenum Disulfide as a Lubricant: A Review of the Fundamental Knowledge,” Wear, 10, pp 422–452.
   Web of Science ®Google Scholar
• Higgs, C.F., III, and Wornyoh, E. Y. A. (2008), “An in situ Mechanism for Self-Replenishing Powder Lubrication: Experiments and Modeling,” Wear, 264(1–2), pp 131.
   Web of Science ®Google Scholar
• Oberle, T. (1952), “Hardness, Elastic Modulus, Wear of Metals,” SAE Technical Paper 520251.
   Google Scholar
• Marinack, M. C., Jr., Musgrave, R. E., and Higgs, C. F., III. (2013), “Experimental Investigations on the Coefficient of Restitution of Single Particles,” Tribology Transactions, 56(4), pp 572–580.
   Web of Science ®Google Scholar
• Marinack, M. C., Jr., Jasti, V. K., Choi, Y. E., and Higgs, C. F., III. (2011), “Couette Grain Flow Experiments: The Effects of the Coefficient of Restitution, Global Solid Fraction, and Materials,” Powder Technology, 211(1), pp 144–155.
   Web of Science ®Google Scholar
• Chaise, T., Nelias, D., and Sadeghi, F. (2011), “On the Effect of Isotropic Hardening on the Coefficient of Restitution for Single or Repeated Impacts Using a Semi-Analytical Method,” Tribology Transactions, 54(5), pp 714–722.
   Web of Science ®Google Scholar
• Higgs, C. F., III, Marinack, Jr, M. C., Mpagazehe, J., and Pudjoprawoto, R. (2013), Tribology for Scientists and Engineers: Particle Tribology: Granular, Slurry, and Powder Tribosystems, Springer: New York.
   Google Scholar
• Wang, L., Zhou, W., Ding, Z., Li, X., and Zhang, C. (2015), “Experimental Determination of the Parameter Effects on the Coefficient of Restitution of Differently Shaped Maize in Three Dimensions,” Powder Technology, 284, pp 187–194.
   Web of Science ®Google Scholar
• Tsui, T. Y. and Pharr, G. M. (1999), “Substrate Effects on Nano-Indentation Mechanical Property Measurements of Soft Films on Hard Substrates,” Journal of Materials Research, 14(1), pp 292–301.
   Web of Science ®Google Scholar
• Johnson, K. L. (1987), Contact Mechanics, Cambridge University Press: Cambridge, UK.
   Google Scholar