Micro/Nanotexture Design for Improving Tribological Properties of Cr/GLC Films in Seawater

References

• Wang, J. Z., Yan, F. Y., and Xue, Q. J. (2009), “Friction and Wear Behavior of Ultra-High Molecular Weight Polyethylene Sliding against GCr15 Steel and Electroless Ni-P Alloy Coating under the Lubrication of Seawater,” Tribology Letters, 35, pp 85–95.
   Web of Science ®Google Scholar
• Wang, Y. X., Wang, L. P., Li, J. L., Chen, J. M., and Xue, Q. J. (2013), “Tribological Properties of Graphite-Like Carbon Coatings Coupling with Different Metals in Ambient Air and Water,” Tribology International, 60, pp 147–155.
   Web of Science ®Google Scholar
• Wang, Y. X., Li, J. L., Wang, L. P., Chen, J. M., and Xue, Q. J. (2013), “Tribological Performances of Graphite-Like Carbon Films Coupled to Different Ceramics in Ambient Air and Water,” Tribology Transactions, 56, pp 333–341.
   Web of Science ®Google Scholar
• Wang, Y. X., Wang, L. P., and Xue, Q. J. (2011), “Controlling Wear Failure of Graphite-Like Carbon Film in Aqueous Environment: Two Feasible Approaches,” Applied Surface Science, 257, pp 4370–4376.
   Web of Science ®Google Scholar
• Huang, J. X., Wan, S. H., Wang, L. P., and Xue, Q. J. (2015), “Tribological Properties of Si-Doped Graphite-Like Amorphous Carbon Film of PEEK Rubbing with Different Counterparts in SBF Medium,” Tribology Letters, 57, pp 10–18.
   Web of Science ®Google Scholar
• Huang, J. X., Wang, L. P., Li, B., Wan, S. H., and Xue, Q. J. (2015), “In vitro Evaluation of the Tribological Response of Mo-Doped Graphite-Like Carbon Film in Different Biological Media,” ACS Applied Materials & Interfaces, 7, pp 2772–2783.
   PubMed Web of Science ®Google Scholar
• Ding, Q., Wang, L. P., Hu, L. T., Hu, T. C., and Wang, Y. (2012), “The Pairing-Dependent Effects of Laser Surface Texturing on Micro Tribological Behavior of Amorphous Carbon Film,” Wear, 274–275, pp 43–49.
   Web of Science ®Google Scholar
• Guan, X. Y. and Wang, L. P. (2012), “The Tribological Performances of Multilayer Graphite-Like Carbon (GLC) Coatings Sliding against Polymers for Mechanical Seals in Water Environments,” Tribology Letters, 47, pp 67–78.
   Web of Science ®Google Scholar
• Guan, X. Y., Lu, Z. B., and Wang, L. P. (2011), “Achieving High Tribological Performance of Graphite-Like Carbon Coatings on Ti6Al4V in Aqueous Environments by Gradient Interface Design,” Tribology Letters, 44, pp 315–325.
   Web of Science ®Google Scholar
• Ye, Y. W., Wang, Y. X., Chen, H., Li, J. L., Yao, Y. R., and Wang, C. T. (2015), “Doping Carbon to Improve the Tribological Performance of CrN Coatings in Seawater,” Tribology International, 90, pp 362–371.
   Web of Science ®Google Scholar
• Camino, D., Jones, A. H. S., Mercs, D., and Teer, D. G. (1999), “High Performance Sputtered Carbon Coatings for Wear Resistant Applications,” Vacuum, 52, pp 125–131.
   Web of Science ®Google Scholar
• Fox, V., Jones, A., Renevier, N. M., and Teer, D. G. (2000), “Hard Lubricating Coatings for Cutting and Forming Tools and Mechanical Components,” Surface and Coatings Technology, 125, pp 347–353.
   Web of Science ®Google Scholar
• Singh, V., Jiang, J. C., and Meletis, E. I. (2005), “Cr-Diamond Like Carbon Nanocomposite Films: Synthesis, Characterization and Properties,” Thin Solid Films, 489, pp 150–158.
   Web of Science ®Google Scholar
• Hovsepian, P. E., Lewis, D. B., Constable, C., Luo, Q., Kok, Y. N., and Munz, W. D. (2003), “Combined Steered Cathodic Arc/Unbalanced Magnetron Grown C/Cr Nanoscale Multilayer Coatings for Tribological Applications,” Surface and Coatings Technology, 174–175, pp 762–769.
   Web of Science ®Google Scholar
• Sheeja, D., Tay, B. K., Sun, C. Q., and Fu, Y. Q. (2003), “Characterization of Ti Containing Amorphous Carbon Films Prepared on Titanium Substrate,” Journal of Materials Science, 38, pp 421–425.
   Web of Science ®Google Scholar
• Wang, A. Y., Lee, K. P., Ahn, J. P., and Han, J. H. (2006), “Structure and Mechanical Properties of W Incorporated Diamond-Like Carbon Films Prepared by a Hybrid Ion Beam Deposition Technique,” Carbon, 44, pp 1826–1832.
   Web of Science ®Google Scholar
• Fu, R. K. Y., Mei, Y. F., Fu, M. Y., Liu, X. Y., and Chu, P. K. (2005), “Thermal Stability of Metal-Doped Diamond-Like Carbon Fabricated Dual Plasma Deposition,” Diamond and Related Materials, 14, pp 1489–1493.
   Web of Science ®Google Scholar
• Uglov, V. V., Kuleshov, A. K., Rusalsky, D. P., Onate, J. I., and Yang, S. Z. (2000), “Wear Resistant Metal–Carbon Composite Coating,” Surface and Coatings Technology, 128–129, pp 150–155.
   Web of Science ®Google Scholar
• Yang, S. and Teer, D. G. (2000), “Investigation of Sputtered Carbon and Carbon/Chromium Multi-Layered Coatings,” Surface and Coatings Technology, 131, pp 412–416.
   Web of Science ®Google Scholar
• Yang, S., Li, X., Renevier, N. M., and Teer, D. G. (2001), “Tribological Properties and Wear Mechanism of Sputtered C/Cr Coating,” Surface and Coatings Technology, 142–144, pp 85–93.
   Web of Science ®Google Scholar
• Shan, L., Wang, Y., Li, J., Jiang, X., and Chen, J. (2015), “Architecture of Multilayer Cr/CrN Coatings for Wear Protection in Seawater: Cr/CrN Ratio and Total Thickness,” Tribology Transactions, 58, pp 914–923.
   Web of Science ®Google Scholar
• Wang, C., Ye, Y., Guan, X., Hu, J., Wang, Y., and Li, J. (2016), “An Analysis of Tribological Performance on Cr/GLC Film Coupling with Si3N4, SiC, WC, Al2O3 and ZrO2 in Seawater,” Tribology International, 96, pp 77–86.
   Web of Science ®Google Scholar
• He, D. Q., Zheng, S. X., Pu, J. B., Zhan, G. A., and Hu, L. T. (2015), “Improving Tribological Properties of Titanium Alloys by Combining Laser Surface Texturing and Diamond-Like Carbon Film,” Tribology International, 8, pp 20–27.
   Web of Science ®Google Scholar
• Pettersson, U. and Jacobson, S. (2004), “Friction and Wear Properties of Micro Textured DLC Coated Surfaces in Boundary Lubricated Sliding,” Tribology Letters, 17, pp 553–559.
   Web of Science ®Google Scholar
• Wang, X., Kato, K., Adachi, K., and Aizawa, K. (2014), “Loads Carrying Capacity Map for the Surface Texture Design of SiC Thrust Bearing Sliding in Water,” Tribology International, 36, pp 189–197.
   Web of Science ®Google Scholar
• Ding, Q., Wang, L., Wang, Y., Wang, S. C., Hu, L. and Xue, Q. (2010), “Improved Tribological Behavior of DLC Films under Water Lubrication by Surface Texturing,” Tribology Letters, 41, pp 439–449.
   Web of Science ®Google Scholar
• Zum Gahr, K. H., Mathieu, M., and Brylka, B. (2007), “Friction Control by Surface Engineering of Ceramic Sliding Pairs in Water,” Wear, 263, pp 920–929.
   Web of Science ®Google Scholar
• Koszela, W., Pawlus, P., and Galda, L. (2007), “The Effect of Oil Pockets Size and Distribution on Wear in Lubricated Sliding,” Wear, 263, pp 1585–1592.
   Web of Science ®Google Scholar
• Pettersson, U. and Jacobson, S. (2007), “Friction and Wear Properties of Micro Textured DLC Coated Surfaces in Boundary Lubricated Sliding,” Tribology International, 40, pp 355–359.
   Web of Science ®Google Scholar
• Pettersson, U. and Jacobson, S. (2003), “Influence of Surface Texture on Boundary Lubricated Sliding Contacts,” Tribology International, 36, pp 857–864.
   Web of Science ®Google Scholar
• Wang, X. and Kato, K. (2002), “Improving the Anti-Seizure Ability of SiC Seal in Water with RIE Texturing,” Tribology Letters, 14, pp 275–280.
   Web of Science ®Google Scholar
• Etsion, I. (2004), “Improving Tribological Performance of Mechanical Components by Laser Surface Texturing,” Tribology Letters, 17, pp 733–737.
   Web of Science ®Google Scholar
• Etsion, I. (2005), “State of the Art in Laser Surface Texturing,” Journal of Tribology, 127, pp 248–253.
   Web of Science ®Google Scholar
• Vilhena, L. M., Sedlaček, M., Podgornik, B., Vižintin, J., Babnik, A., and Možina, J. (2009), “Surface Texturing by Pulsed Nd:YAG Laser,” Tribology International, 42, pp 1496–1504.
   Web of Science ®Google Scholar
• Volchok, A., Halperin, G., and Etsion, I. (2002), “The Effect of Surface Regular Microtopography on Fretting Fatigue Life,” Wear, 253, pp 509–515.
   Web of Science ®Google Scholar
• Zou, M., Cai, L., and Yang, D. (2006), “Nanotribology of a Silica Nanoparticle-Textured Surface,” Tribology Transactions, 49, pp 66–71.
   Web of Science ®Google Scholar
• Song, H., Ji, L., Li, H., Liu, X., Zhou, H., Liu, L., and Chen, L. (2015), “Superlow Friction Behavior of Surface-Textured a-C:H Film in Water Environments,” Tribology Transactions, 58, pp 867–874.
   Web of Science ®Google Scholar
• Chilamakuri, S. K. and Bhushan, B. (1997), “Optimization of Asperities for Laser-Textured Magnetic Disk Surfaces,” Tribology Transactions, 40, pp 303–311.
   Web of Science ®Google Scholar
• Sudeep, U., Tandon, N., and Pandey, R. K. (2015), “Tribological Studies of Lubricated Laser-Textured Point Contacts in Rolling/Sliding Reciprocating Motion with Investigations of Wettability and Nanohardness,” Tribology Transactions, 58, pp 625–634.
   Web of Science ®Google Scholar
• Shan, L., Wang, Y., Li, J., Li, H., Wu, X., and Chen, J. (2013), “Tribological Behaviours of PVD TiN and TiCN Coatings in Artificial Seawater,” Surface and Coatings Technology, 226, pp 40–50.
   Web of Science ®Google Scholar
• Dai, W., Ke, P. L., and Wang, A. Y. (2011), “Microstructure and Property Evolution of Cr-DLC Films with Different Cr Content Deposited by a Hybrid Beam Technique,” Vacuum, 85, pp 792–797.
   Web of Science ®Google Scholar
• Bismarck, A., Tahhan, R., Springer, J. S. A., Schulz, A., Klapötke, T. M., Zeil, H., and Michaeli, W. (1997), “Influence of Fluorination on the Properties of Carbon Fibres,” Journal of Fluorine Chemistry, 84, pp 127–134.
   Web of Science ®Google Scholar
• Healy, M. D., Smith, D. C., Rubiano, R. R., Elliott, N. E., and Springer, R. W. (1994), “Use of Tetraneopentylchromium as a Precursor for the Organometallic Chemical Vapor Deposition of Chromium Carbide: A Reinvestigation,” Chemistry of Materials, 6, pp 448–453.
   Web of Science ®Google Scholar
• Philippe, M. and Mark, E. B. (1992), “XPS Study of the Passive Films Formed on Nitrogen-Implanted Austenitic Stainless Steels,” Applied Surface Science, 59, pp 7–21.
   Web of Science ®Google Scholar
• Halada, G. P. and Clayton, C. R. J. (1991), “Photoreduction of Hexavalent Chromium during X-ray Photoelectron Spectroscopy Analysis of Electrochemical and Thermal Films,” Journal of the Electrochemical Society, 138, pp 2921–2927.
   Web of Science ®Google Scholar
• Tandon, R. K., Payling, R., Chenhall, B. E., Crisp, P. T., Elli, J., and Baker, R. S. (1985), “Application of X-ray Photoelectron Spectroscopy to the Analysis of Stainless-Steel Welding Aerosols,” Applied Surface Science, 20, pp 527–537.
   Web of Science ®Google Scholar
• Ye, Y., Wang, C., Wang, Y., Zhao, W., Li, J., and Yao, Y. (2015), “A Novel Strategy to Enhance the Tribological Properties of Cr/GLC Films in Seawater by Surface Texturing,” Surface and Coatings Technology, 280, pp 338–346.
   Web of Science ®Google Scholar
• Stan, V., Maritza, G. J., Veprek, H., Pavla, K., and Jan, P. (2005), “Different Approaches to Superhard Coatings and Nanocomposites,” Thin Solid Films, 476, pp 1–29.
   Web of Science ®Google Scholar
• Field, S. K., Jarratt, M., and Teer, D. G. (2004), “Tribological Properties of Graphite-Like and Diamond-Like Carbon Coatings,” Tribology International, 37, pp 949–956.
   Web of Science ®Google Scholar
• Wang, Y., Wang, L., Zhang, G., Wang, S., Wood, R. J. K., and Xue, Q. (2010), “Effect of Bias Voltage on Microstructure and Properties of Ti-Doped Graphite-Like Carbon Films Synthesized by Magnetron Sputtering,” Surface and Coatings Technology, 205, pp 793–800.
   Web of Science ®Google Scholar
• Zhang, H. S., Endrino, J. L., and Anders, A. (2008), “Comparative Surface and Nano-Tribological Characteristics of Nanocomposite Diamond-Like Carbon Thin Films Doped by Silver,” Applied Surface Science, 255, pp 2551–2256.
   Web of Science ®Google Scholar
• Holmberg, K., Ronkainen, H., Laukkanen, A., and Wallin, K. (2007), “Friction and Wear of Coated Surfaces—Scales, Modelling and Simulation of Tribomechanisms,” Surface and Coatings Technology, 202, pp 1034–1049.
   Web of Science ®Google Scholar
• Suzuki, M., Tanaka, A., Ohana, T., and Zhang, W. (2004), “Frictional Behavior of DLC Films in a Water Environment,” Diamond and Related Materials, 13, pp 1464–1468.
   Web of Science ®Google Scholar
• Sánchez-López, J. C., Erdemir, A., Donnet, C., and Rojas, T. C. (2002), “Friction-Induced Structural Transformations of Diamond Like Carbon Coatings under Various Atmospheres,” Surface and Coatings Technology, 163–164, pp 444–450.
   Web of Science ®Google Scholar
• Cheng, S., Dong, K., and Zhang, X. (2007), “Study of the Influence of Apparent Contact Angle on Regular Rough Surface Considering Liquid Wetting Properties,” Mechanical Science and Technology for Aerospace Engineering, 26, pp 822–827.
   Google Scholar
• Wang, D., Li, Z., and Zhu, Y. (2003), “Lubrication and Tribology in Seawater Hydraulic Piston Pump,” Journal of Marine Science and Application, 2, pp 35–40.
   Google Scholar
• Yamamoto, K. and Matsukado, K. (2006), “Effect of Hydrogenated DLC Coating Hardness on the Tribological Properties under Water Lubrication,” Tribology International, 39, pp 1609–1614.
   Web of Science ®Google Scholar
• Zum Gahr, K. H., Mathieua, M., and Brylka, B. (2007), “Friction Control by Surface Engineering of Ceramic Sliding Pairs in Water,” Wear, 263, pp 920–929.
   Web of Science ®Google Scholar
• Schmidt, T., André, M., and Poll, G. (2010), “A Transient 2D-Finite-Element Approach for the Simulation of Mixed Lubrication Effects of Reciprocating Hydraulic Rod Seals,” Tribology International, 43, pp 1775–1785.
   Web of Science ®Google Scholar
• Nogueira, I., Dias, A. M., Gras, R., and Progri, R. (2002), “An Experimental Model for Mixed Friction during Running-In,” Wear, 253, pp 541–549.
   Web of Science ®Google Scholar
• Riyadh, A., Samarai, A., Haftirman  , Ahmad, K. R., and Al-Douri, Y. (2013), “Effect of Roughness of Hypo- and Hyper-Eutectic Al-Si Piston Alloy on Wear Characteristics under Lubrication,” Procedia Engineering, 53, pp 616–623.
   Google Scholar