References
- Wang, J. Z., Yan, F. Y., and Xue, Q. J. (2009), “Friction and Wear Behavior of Ultra-High Molecular Weight Polyethylene Sliding against GCr15 Steel and Electroless Ni-P Alloy Coating under the Lubrication of Seawater,” Tribology Letters, 35, pp 85–95.
- Wang, Y. X., Wang, L. P., Li, J. L., Chen, J. M., and Xue, Q. J. (2013), “Tribological Properties of Graphite-Like Carbon Coatings Coupling with Different Metals in Ambient Air and Water,” Tribology International, 60, pp 147–155.
- Wang, Y. X., Li, J. L., Wang, L. P., Chen, J. M., and Xue, Q. J. (2013), “Tribological Performances of Graphite-Like Carbon Films Coupled to Different Ceramics in Ambient Air and Water,” Tribology Transactions, 56, pp 333–341.
- Wang, Y. X., Wang, L. P., and Xue, Q. J. (2011), “Controlling Wear Failure of Graphite-Like Carbon Film in Aqueous Environment: Two Feasible Approaches,” Applied Surface Science, 257, pp 4370–4376.
- Huang, J. X., Wan, S. H., Wang, L. P., and Xue, Q. J. (2015), “Tribological Properties of Si-Doped Graphite-Like Amorphous Carbon Film of PEEK Rubbing with Different Counterparts in SBF Medium,” Tribology Letters, 57, pp 10–18.
- Huang, J. X., Wang, L. P., Li, B., Wan, S. H., and Xue, Q. J. (2015), “In vitro Evaluation of the Tribological Response of Mo-Doped Graphite-Like Carbon Film in Different Biological Media,” ACS Applied Materials & Interfaces, 7, pp 2772–2783.
- Ding, Q., Wang, L. P., Hu, L. T., Hu, T. C., and Wang, Y. (2012), “The Pairing-Dependent Effects of Laser Surface Texturing on Micro Tribological Behavior of Amorphous Carbon Film,” Wear, 274–275, pp 43–49.
- Guan, X. Y. and Wang, L. P. (2012), “The Tribological Performances of Multilayer Graphite-Like Carbon (GLC) Coatings Sliding against Polymers for Mechanical Seals in Water Environments,” Tribology Letters, 47, pp 67–78.
- Guan, X. Y., Lu, Z. B., and Wang, L. P. (2011), “Achieving High Tribological Performance of Graphite-Like Carbon Coatings on Ti6Al4V in Aqueous Environments by Gradient Interface Design,” Tribology Letters, 44, pp 315–325.
- Ye, Y. W., Wang, Y. X., Chen, H., Li, J. L., Yao, Y. R., and Wang, C. T. (2015), “Doping Carbon to Improve the Tribological Performance of CrN Coatings in Seawater,” Tribology International, 90, pp 362–371.
- Camino, D., Jones, A. H. S., Mercs, D., and Teer, D. G. (1999), “High Performance Sputtered Carbon Coatings for Wear Resistant Applications,” Vacuum, 52, pp 125–131.
- Fox, V., Jones, A., Renevier, N. M., and Teer, D. G. (2000), “Hard Lubricating Coatings for Cutting and Forming Tools and Mechanical Components,” Surface and Coatings Technology, 125, pp 347–353.
- Singh, V., Jiang, J. C., and Meletis, E. I. (2005), “Cr-Diamond Like Carbon Nanocomposite Films: Synthesis, Characterization and Properties,” Thin Solid Films, 489, pp 150–158.
- Hovsepian, P. E., Lewis, D. B., Constable, C., Luo, Q., Kok, Y. N., and Munz, W. D. (2003), “Combined Steered Cathodic Arc/Unbalanced Magnetron Grown C/Cr Nanoscale Multilayer Coatings for Tribological Applications,” Surface and Coatings Technology, 174–175, pp 762–769.
- Sheeja, D., Tay, B. K., Sun, C. Q., and Fu, Y. Q. (2003), “Characterization of Ti Containing Amorphous Carbon Films Prepared on Titanium Substrate,” Journal of Materials Science, 38, pp 421–425.
- Wang, A. Y., Lee, K. P., Ahn, J. P., and Han, J. H. (2006), “Structure and Mechanical Properties of W Incorporated Diamond-Like Carbon Films Prepared by a Hybrid Ion Beam Deposition Technique,” Carbon, 44, pp 1826–1832.
- Fu, R. K. Y., Mei, Y. F., Fu, M. Y., Liu, X. Y., and Chu, P. K. (2005), “Thermal Stability of Metal-Doped Diamond-Like Carbon Fabricated Dual Plasma Deposition,” Diamond and Related Materials, 14, pp 1489–1493.
- Uglov, V. V., Kuleshov, A. K., Rusalsky, D. P., Onate, J. I., and Yang, S. Z. (2000), “Wear Resistant Metal–Carbon Composite Coating,” Surface and Coatings Technology, 128–129, pp 150–155.
- Yang, S. and Teer, D. G. (2000), “Investigation of Sputtered Carbon and Carbon/Chromium Multi-Layered Coatings,” Surface and Coatings Technology, 131, pp 412–416.
- Yang, S., Li, X., Renevier, N. M., and Teer, D. G. (2001), “Tribological Properties and Wear Mechanism of Sputtered C/Cr Coating,” Surface and Coatings Technology, 142–144, pp 85–93.
- Shan, L., Wang, Y., Li, J., Jiang, X., and Chen, J. (2015), “Architecture of Multilayer Cr/CrN Coatings for Wear Protection in Seawater: Cr/CrN Ratio and Total Thickness,” Tribology Transactions, 58, pp 914–923.
- Wang, C., Ye, Y., Guan, X., Hu, J., Wang, Y., and Li, J. (2016), “An Analysis of Tribological Performance on Cr/GLC Film Coupling with Si3N4, SiC, WC, Al2O3 and ZrO2 in Seawater,” Tribology International, 96, pp 77–86.
- He, D. Q., Zheng, S. X., Pu, J. B., Zhan, G. A., and Hu, L. T. (2015), “Improving Tribological Properties of Titanium Alloys by Combining Laser Surface Texturing and Diamond-Like Carbon Film,” Tribology International, 8, pp 20–27.
- Pettersson, U. and Jacobson, S. (2004), “Friction and Wear Properties of Micro Textured DLC Coated Surfaces in Boundary Lubricated Sliding,” Tribology Letters, 17, pp 553–559.
- Wang, X., Kato, K., Adachi, K., and Aizawa, K. (2014), “Loads Carrying Capacity Map for the Surface Texture Design of SiC Thrust Bearing Sliding in Water,” Tribology International, 36, pp 189–197.
- Ding, Q., Wang, L., Wang, Y., Wang, S. C., Hu, L. and Xue, Q. (2010), “Improved Tribological Behavior of DLC Films under Water Lubrication by Surface Texturing,” Tribology Letters, 41, pp 439–449.
- Zum Gahr, K. H., Mathieu, M., and Brylka, B. (2007), “Friction Control by Surface Engineering of Ceramic Sliding Pairs in Water,” Wear, 263, pp 920–929.
- Koszela, W., Pawlus, P., and Galda, L. (2007), “The Effect of Oil Pockets Size and Distribution on Wear in Lubricated Sliding,” Wear, 263, pp 1585–1592.
- Pettersson, U. and Jacobson, S. (2007), “Friction and Wear Properties of Micro Textured DLC Coated Surfaces in Boundary Lubricated Sliding,” Tribology International, 40, pp 355–359.
- Pettersson, U. and Jacobson, S. (2003), “Influence of Surface Texture on Boundary Lubricated Sliding Contacts,” Tribology International, 36, pp 857–864.
- Wang, X. and Kato, K. (2002), “Improving the Anti-Seizure Ability of SiC Seal in Water with RIE Texturing,” Tribology Letters, 14, pp 275–280.
- Etsion, I. (2004), “Improving Tribological Performance of Mechanical Components by Laser Surface Texturing,” Tribology Letters, 17, pp 733–737.
- Etsion, I. (2005), “State of the Art in Laser Surface Texturing,” Journal of Tribology, 127, pp 248–253.
- Vilhena, L. M., Sedlaček, M., Podgornik, B., Vižintin, J., Babnik, A., and Možina, J. (2009), “Surface Texturing by Pulsed Nd:YAG Laser,” Tribology International, 42, pp 1496–1504.
- Volchok, A., Halperin, G., and Etsion, I. (2002), “The Effect of Surface Regular Microtopography on Fretting Fatigue Life,” Wear, 253, pp 509–515.
- Zou, M., Cai, L., and Yang, D. (2006), “Nanotribology of a Silica Nanoparticle-Textured Surface,” Tribology Transactions, 49, pp 66–71.
- Song, H., Ji, L., Li, H., Liu, X., Zhou, H., Liu, L., and Chen, L. (2015), “Superlow Friction Behavior of Surface-Textured a-C:H Film in Water Environments,” Tribology Transactions, 58, pp 867–874.
- Chilamakuri, S. K. and Bhushan, B. (1997), “Optimization of Asperities for Laser-Textured Magnetic Disk Surfaces,” Tribology Transactions, 40, pp 303–311.
- Sudeep, U., Tandon, N., and Pandey, R. K. (2015), “Tribological Studies of Lubricated Laser-Textured Point Contacts in Rolling/Sliding Reciprocating Motion with Investigations of Wettability and Nanohardness,” Tribology Transactions, 58, pp 625–634.
- Shan, L., Wang, Y., Li, J., Li, H., Wu, X., and Chen, J. (2013), “Tribological Behaviours of PVD TiN and TiCN Coatings in Artificial Seawater,” Surface and Coatings Technology, 226, pp 40–50.
- Dai, W., Ke, P. L., and Wang, A. Y. (2011), “Microstructure and Property Evolution of Cr-DLC Films with Different Cr Content Deposited by a Hybrid Beam Technique,” Vacuum, 85, pp 792–797.
- Bismarck, A., Tahhan, R., Springer, J. S. A., Schulz, A., Klapötke, T. M., Zeil, H., and Michaeli, W. (1997), “Influence of Fluorination on the Properties of Carbon Fibres,” Journal of Fluorine Chemistry, 84, pp 127–134.
- Healy, M. D., Smith, D. C., Rubiano, R. R., Elliott, N. E., and Springer, R. W. (1994), “Use of Tetraneopentylchromium as a Precursor for the Organometallic Chemical Vapor Deposition of Chromium Carbide: A Reinvestigation,” Chemistry of Materials, 6, pp 448–453.
- Philippe, M. and Mark, E. B. (1992), “XPS Study of the Passive Films Formed on Nitrogen-Implanted Austenitic Stainless Steels,” Applied Surface Science, 59, pp 7–21.
- Halada, G. P. and Clayton, C. R. J. (1991), “Photoreduction of Hexavalent Chromium during X-ray Photoelectron Spectroscopy Analysis of Electrochemical and Thermal Films,” Journal of the Electrochemical Society, 138, pp 2921–2927.
- Tandon, R. K., Payling, R., Chenhall, B. E., Crisp, P. T., Elli, J., and Baker, R. S. (1985), “Application of X-ray Photoelectron Spectroscopy to the Analysis of Stainless-Steel Welding Aerosols,” Applied Surface Science, 20, pp 527–537.
- Ye, Y., Wang, C., Wang, Y., Zhao, W., Li, J., and Yao, Y. (2015), “A Novel Strategy to Enhance the Tribological Properties of Cr/GLC Films in Seawater by Surface Texturing,” Surface and Coatings Technology, 280, pp 338–346.
- Stan, V., Maritza, G. J., Veprek, H., Pavla, K., and Jan, P. (2005), “Different Approaches to Superhard Coatings and Nanocomposites,” Thin Solid Films, 476, pp 1–29.
- Field, S. K., Jarratt, M., and Teer, D. G. (2004), “Tribological Properties of Graphite-Like and Diamond-Like Carbon Coatings,” Tribology International, 37, pp 949–956.
- Wang, Y., Wang, L., Zhang, G., Wang, S., Wood, R. J. K., and Xue, Q. (2010), “Effect of Bias Voltage on Microstructure and Properties of Ti-Doped Graphite-Like Carbon Films Synthesized by Magnetron Sputtering,” Surface and Coatings Technology, 205, pp 793–800.
- Zhang, H. S., Endrino, J. L., and Anders, A. (2008), “Comparative Surface and Nano-Tribological Characteristics of Nanocomposite Diamond-Like Carbon Thin Films Doped by Silver,” Applied Surface Science, 255, pp 2551–2256.
- Holmberg, K., Ronkainen, H., Laukkanen, A., and Wallin, K. (2007), “Friction and Wear of Coated Surfaces—Scales, Modelling and Simulation of Tribomechanisms,” Surface and Coatings Technology, 202, pp 1034–1049.
- Suzuki, M., Tanaka, A., Ohana, T., and Zhang, W. (2004), “Frictional Behavior of DLC Films in a Water Environment,” Diamond and Related Materials, 13, pp 1464–1468.
- Sánchez-López, J. C., Erdemir, A., Donnet, C., and Rojas, T. C. (2002), “Friction-Induced Structural Transformations of Diamond Like Carbon Coatings under Various Atmospheres,” Surface and Coatings Technology, 163–164, pp 444–450.
- Cheng, S., Dong, K., and Zhang, X. (2007), “Study of the Influence of Apparent Contact Angle on Regular Rough Surface Considering Liquid Wetting Properties,” Mechanical Science and Technology for Aerospace Engineering, 26, pp 822–827.
- Wang, D., Li, Z., and Zhu, Y. (2003), “Lubrication and Tribology in Seawater Hydraulic Piston Pump,” Journal of Marine Science and Application, 2, pp 35–40.
- Yamamoto, K. and Matsukado, K. (2006), “Effect of Hydrogenated DLC Coating Hardness on the Tribological Properties under Water Lubrication,” Tribology International, 39, pp 1609–1614.
- Zum Gahr, K. H., Mathieua, M., and Brylka, B. (2007), “Friction Control by Surface Engineering of Ceramic Sliding Pairs in Water,” Wear, 263, pp 920–929.
- Schmidt, T., André, M., and Poll, G. (2010), “A Transient 2D-Finite-Element Approach for the Simulation of Mixed Lubrication Effects of Reciprocating Hydraulic Rod Seals,” Tribology International, 43, pp 1775–1785.
- Nogueira, I., Dias, A. M., Gras, R., and Progri, R. (2002), “An Experimental Model for Mixed Friction during Running-In,” Wear, 253, pp 541–549.
- Riyadh, A., Samarai, A., Haftirman , Ahmad, K. R., and Al-Douri, Y. (2013), “Effect of Roughness of Hypo- and Hyper-Eutectic Al-Si Piston Alloy on Wear Characteristics under Lubrication,” Procedia Engineering, 53, pp 616–623.