References
- Persson, B. N. J. and Yang, C. (2008), “Theory of the Leak-Rate of Seals,” Journal of Physics: Condensed Matter, 20(31), p 315011.
- Ke, Y. C., Yao, X. F., Yang, H., and Liu, X. Y. (2014), “Kinetic Friction Characterizations of the Tubular Rubber Seals,” Tribology International, 72, pp 35–41.
- Persson, B. N. J. (2001), “Elastoplastic Contact between Randomly Rough Surfaces,” Physical Review Letters, 87(11), p 116101.
- Persson, B. N. J. (2006), “Contact Mechanics for Randomly Rough Surfaces,” Surface Science Reports, 61(4), pp 201–227.
- Liu, M., Zhang, X., Zhang, G., and Chen, Y. (2006), “Study on Micronozzle Flow and Propulsion Performance Using DSMC and Continuum Methods,” Acta Mechanica Sinica, 22(5), pp 409–416.
- Persson, B. N. J. (2001), “Theory of Rubber Friction and Contact Mechanics,” The Journal of Chemical Physics, 115(8), pp 3840–3861.
- Persson, B. N. J. (2008), “On the Elastic Energy and Stress Correlation in the Contact between Elastic Solids with Randomly Rough Surfaces,” Journal of Physics: Condensed Matter, 20(31), p 312001.
- Persson, B. N. J. (2007), “Relation between Interfacial Separation and Load: A General Theory of Contact Mechanics,” Physical Review Letters, 99(12), p. 125502
- Yang, C. and Persson, B. N. J. (2008), “Contact Mechanics: Contact Area and Interfacial Separation from Small Contact to Full Contact,” Journal of Physics: Condensed Matter, 20(21), p 215214.
- Lorenz, B. and Persson, B. N. J. (2009), “Leak Rate of Seals: Comparison of Theory with Experiment,” Europhysics Letters, 86(4), p 44006.
- Lorenz, B. and Persson, B. N. J. (2010), “Leak Rate of Seals: Effective-Medium Theory and Comparison with Experiment,” European Physical Journal E, 31(2), pp 159–167.
- Persson, B. N. J., Prodanov, N., Krick, B. A., Rodriguez, N., Mulakaluri, N., Sawyer, W. G., and Mangiagalli, P. (2012), “Elastic Contact Mechanics: Percolation of the Contact Area and Fluid Squeeze-Out,” European Physical Journal E, 35(1), pp. 143–148.
- Bottiglione, F., Carbone, G., and Mantriota, G. (2009), “Fluid Leakage in Seals: An Approach Based on Percolation Theory,” Tribology International, 42(5), pp 731–737.
- Bottiglione, F., Carbone, G., Mangialardi, L., and Mantriota, G. (2009), “Leakage Mechanism in Flat Seals,” Journal of Applied Physics, 106(10), p 104902.
- Zheng, Q., Xu, J., Yang, B., and Yu, B. (2013), “A Fractal Model for Gaseous Leak Rates through Contact Surfaces under Non-Isothermal Condition,” Applied Thermal Engineering, 52(1), pp 54–61.
- Okada, H., Itoh, T., and Suga, T. (2008), “The Influence of Surface Profiles on Leakage in Room Temperature Seal-Bonding,” Sensors and Actuators A: Physics, 144(1), pp 124–129.
- Polycarpou, A. A. and Etsion, I. (1998), “Static Sealing Performance of Gas Mechanical Seals including Surface Roughness and Rarefaction Effects,” Tribology Transactions, 41(4), pp 531–536.
- Yao, X. F., Lei, Y. M., Xiong, C., and Wu, Q. (2012), “Mechanics Analysis on Helium Leakage of Flexible Composites,” Mechanics of Advanced Materials and Structures, pp 603–612.
- Ke, Y. C., Yao, X. F., Yang, H., and He, Q. (2015), “A Measuring Method of Gas Leakage along the Contact Interface of the Stripped Rubber Seals,” Measurement, 61, pp 299–304.
- Palle, S. and Aliabadi, S. (2012), “Slip Flow and Heat Transfer in Rectangular and Circular Microchannels Using Hybrid FE/FV Method,” International Journal of Numerical Methods in Engineering, 89(1), pp 53–70.
- Janson, S., Helvajian, H., and Breuer, K. (1999), MEMS, Microengineering and Aerospace Systems. AIA Paper, pp. 99–3802.
- Yang, X., Yang, J. M., Tai, Y., and Ho, C. (1999), “Micromachined Membrane Particle Filters,” Sensors & Actuators A: Physics, 73(1), pp 184–191.
- Marco, S. M. and Han, L. S. (1955), “A Note on Limiting Laminar Nusselt Number in Ducts with Constant Temperature Gradient by Analogy to Thin-Plate Theory,” Transactions of the ASME, 77, pp 625–630.
- Lee, P. and Garimella, S. V. (2006), “Thermally Developing Flow and Heat Transfer in Rectangular Microchannels of Different Aspect Ratios,” International Journal of Heat and Mass Transfer, 49(17–18), pp 3060–3067.