Lubricant Additives Based on Carbon Nanotubes Produced from Carbon-Rich Fly Ash

References

• Mofarrah, A. and Husain, T. (2013), “Use of Heavy Oil Fly Ash as a Color Ingredient in Cement Mortar,” International Journal of Concrete Structures and Materials, 7, pp 111–117.
   Web of Science ®Google Scholar
• Habib, S. S. (2009), “Naturally Endowed Oxide Nanoparticles from Carbon Ash in Saudi Arabia,” International Journal of Nano and Biomaterials, 2, pp 437–441.
   Google Scholar
• Mofarrah, A., Husain T., and Danish, E. Y. (2012), “Investigation of the Potential Use of Heavy Oil Fly Ash as Stabilized Fill Material for Construction,” Journal of Materials in Civil Engineering, 24, pp 684–690.
   Web of Science ®Google Scholar
• Tsai, S. L. and Tsai, M. S. (1997), “Study on the Physical and Chemical Characteristics, Yield and TCLP Test of Oil-Fired Fly Ash,” Mining Metallurgy, 41, pp 57–68.
   Google Scholar
• Hsieh, Y.-M. and Tsai, M.-S. (2003), “Physical and Chemical Analyses of Unburned Carbon from Oil-Fired Fly Ash,” Carbon, 41, pp 2317–2324.
   Web of Science ®Google Scholar
• Al-Malack, M. H., Bukhari, A. A., Al-Amoudi, O. S., Al-Muhanna, H. H., and Zaidi, T. H. (2013), “Characteristics of Fly Ash Produced at Power and Water Desalination Plants Firing Fuel Oil,” International Journal of Environmental Research, 7, pp 455–466.
   Web of Science ®Google Scholar
• Ahmaruzzaman, M. A. (2010), “Review on the Utilization of Fly Ash,” Progress in Energy and Combustion Science, 36, pp 327–363.
   Web of Science ®Google Scholar
• Rohatgi, P. K. and Guo, R. Q. (1997), “Mechanism of Abrasive Wear of Al-Si Hypoeutectic Alloy Containing 5 vol% Fly Ash,” Tribology Letters, 3, pp 339–347.
   Web of Science ®Google Scholar
• Naqvi, A. A., Garwan, M. A., Maslehuddin, M., Nagadi, M. M., Al-Amoudi, O. S. B., Khateeb-ur-Rehman, and Raashid, M. (2009), “Prompt Gamma Analysis of Fly Ash, Silica Fume and Superpozz Blended Cement Concrete Specimen,” Applied Radiation and Isotopes, 67, pp 1707–1710.
   PubMed Web of Science ®Google Scholar
• Ilic, M., Cheeseman, C., Sollars, C., and Knight, J. (2003), “Mineralogy and Microstructure of Sintered Lignite Coal Fly Ash,” Fuel, 82, pp 331–336.
   Web of Science ®Google Scholar
• Skvara, F., Kopecky, L., Smilauer, V., and Bittnar, Z. (2009), “Material and Structural Characterization of Alkali Activated Low-Calcium Brown Coal Fly Ash,” Journal of Hazardous Materials,168, pp 711–720.
   PubMed Web of Science ®Google Scholar
• Qian, G. R., Shi, J., Cao, Y. L., Xu, Y. F., and Chui, P. C. (2008), “Properties of MSW Fly Ash–Calcium Sulfoaluminate Cement Matrix and Stabilization/Solidification on Heavy Metals,” Journal of Hazardous Materials,152, pp 196–203.
   PubMed Web of Science ®Google Scholar
• Yasui, A., Kamiya, Y., Sugiyama, S., Ono, S., Noda, H., and Ichikawa, Y. (2009), “Synthesis of Carbon Nanotubes on Fly Ashes by Chemical Vapor Deposition Processing,” IEEJ Transactions on Electrical and Electronic Engineering, 4, pp 787–789.
   Web of Science ®Google Scholar
• Dunens, O. M., Mackenzie, K. J., and Harris, A. T. (2009), “Synthesis of Multiwalled Carbon Nanotubes on Fly Ash Derived Catalysts,” Environmental Science & Technology, 43, pp 7889–7894.
   PubMed Web of Science ®Google Scholar
• Nath, D. C. D. and Sahajwalla, V. (2011), “Application of Fly Ash as a Catalyst for Synthesis of Carbon Nanotube Ribbons,” Journal of Hazardous Materials, 192, pp 691–697.
   PubMed Web of Science ®Google Scholar
• Silvestre-Albero, J. and Rodríguez-Reinoso, F. (2012), Novel Carbon Adsorbents, 1st ed., Elsevier: Amsterdam.
   Google Scholar
• Haerle, R., Riedo, E., Pasquarello, A., and Baldereschi, A. (2002), “sp2/sp3 Hybridization Ratio in Amorphous Carbon from C 1s Core-Level Shifts: X-ray Photoelectron Spectroscopy and First Principles Calculation,” The Journal of Physical Chemistry B, 65, pp 045101.
   Google Scholar
• Ebbesen, T. W. and Ajayan, P. M. (1992), “Large-Scale Synthesis of Carbon Nanotubes,” Nature, 358, pp 220–221.
   Web of Science ®Google Scholar
• Cui, S. Scharff, Siegmund, P., Schneider, C.,  , D., Risch, K., Klötzer, S., Spiess, L., Romanus, H., and Schawohl, J. (2004), “Investigation on Preparation of Multiwalled Carbon Nanotubes by DC Arc Discharge under N2 Atmosphere,” Carbon, 42, pp 931–939.
   Web of Science ®Google Scholar
• Tsai, Y. Y., Su, J. S., Su, C. Y., He, W. H. (2009), “Production of Carbon Nanotubes by Single-Pulse Discharge in Air,” Journal of Materials Processing Technology, 209, pp 4413–4416.
   Web of Science ®Google Scholar
• Düzcükoğlu, H., Ekincia, Ş., Şahin, Ö. S., Avc, A., Ekrem, M., Ünald, M. (2015), “Enhancement of Wear and Friction Characteristics of Epoxy Resin by Multiwall Carbon Nano Tube and Boron Nitride Nano Particles,” Tribology Transactions, 58, pp 635–642.
   Web of Science ®Google Scholar
• Harris, P. J. F. (2007), “Solid State Growth Mechanisms for Carbon Nanotubes—Review Article,” Carbon, 45, pp 229–239.
   Web of Science ®Google Scholar
• Thess, A., Lee, R., Nikolaev, P., Dai, H., Petit, P., Robert, J., Xu, C., Lee, Y. H., Kim, S. G., Rinzler, A. G., Colbert, D. T., Scuseria, G. E., Tomanek, D., Fischer, J. E., and Smalley, R. E. (1996), “Crystalline Ropes of Metallic Carbon Nanotubes” Science, 273, 483–487.
   PubMed Web of Science ®Google Scholar
• Stramel, A. A., Gupta, M. C., Lee, H. R., Yu, J. W.C., and Edwards, W. C. (2010), “Pulsed Laser Deposition of Carbon Nanotube and Polystyrene–Carbon Nanotube Composite Thin Films,” Optics and Lasers in Engineering,48, pp 1291–1295.
   Web of Science ®Google Scholar
• Kokai, F., Nozaki, I., Okada, T., Koshio, A., and Kuzumaki, T. (2011), “Efficient Growth of Multi Walled Carbon Nanotubes by Continuous-Wave Laser Vaporization of Graphite Containing B4C,” Carbon, 49, 1173–1181.
   Web of Science ®Google Scholar
• Jamshidijam, M., Akbari-Fakhrabadi, A., Masoudpanah, S. M., Hasani, G. H., and Mangalaraja, R. V. (2013), “Wear Behavior of Multiwalled Carbon Nanotube/AZ31 Composite Obtained by Friction Stir Processing,” Tribology Transactions, 56, pp 827–832.
   Web of Science ®Google Scholar
• Zanganeh, S., Torabi, M., Kajbafvalac, A., Zanganeh, N., Bayati, M. R., Molaei, R., Zargar, H. R., and Sadrnezhaad, S. K. (2010), “CVD Fabrication of Carbon Nanotubes on Electrodeposited Flower-Like Fe Nanostructures,” Journal of Alloys and Compounds, 507, 494–497.
   Web of Science ®Google Scholar
• Zhang, J., Tu, R., and Goto, T. (2011), “Preparation of Carbon Nanotube by Rotary CVD on Ni Nano Particle Precipitated cBN Using Nickelocene as a Precursor,” Materials Letters, 65, pp 367–370.
   Web of Science ®Google Scholar
• Iijima, S. (1991), “Helical Microtubules of Graphitic Carbon,” Nature, 354, pp 56–57.
   Web of Science ®Google Scholar
• Wu, Y. Y. and Tsui, W. C. (2007), “Experimental Analysis of Tribological Properties of Lubricating Oils with Nanoparticles Additives,” Wear, 262, pp 819–825.
   Web of Science ®Google Scholar
• Peng, D. X. (2009), “Tribological Properties of Diamond and SiO2 Nanoparticles Added in Paraffin,” Tribology International, 42, pp 911–917.
   Web of Science ®Google Scholar
• Zhang, M., Wang, X., Fu, X., and Yanqiu, X. (2009), “Performance and Anti-Wear Mechanism of CaCO3 Nanoparticles as a Green Additive in Poly-Alpha-Olefin,” Tribology International, 42, pp 1029–1039.
   Web of Science ®Google Scholar
• Bhaumik, S., Prabhu, S., and Singh, K. J. (2014), “Analysis of Tribological Behavior of Carbon Nanotube Based Industrial Mineral Gear Oil 250 cSt Viscosity,” Advances in Tribology, 2014, pp 341365.
   Google Scholar
• Carvalho, O., Mihaela, B., Soares, D., Gomes, J., and Silva, F. S. (2015), “Improvement on Sliding Wear Behaviour of Al/Cast Iron Tribopair by CNT's Reinforcement of an Al Alloy,” Tribology Transactions, 58, pp 643–653.
   Web of Science ®Google Scholar
• Çöl, M. N., Çelik, O. N., and Sert, A. (2014), “Tribological Behaviours of Lubricating Oils with CNT and Si3N4 Nanoparticle Additives,” Archives of Materials Science and Engineering, 67, pp 53–59.
   Google Scholar
• Salah, N., Habib, S. S., Khan, Z. H., Memic, A., and Nahas, M. N. (2012), “Growth of Carbon Nanotubes on Catalysts Obtained from Carbon Rich Fly Ash,” Digest Journal of Nanomaterials and Biostructures,7, pp 1279–1288.
   Web of Science ®Google Scholar
• Salah, N. A. (2013), “Method of Forming Carbon Nanotubes from Carbon-Rich Fly Ash,” U.S. Patent No. 8,609,189 B2.
   Google Scholar
• Salah, N., Habib, S. S., Khan, Z. H., Al-ghamdi, A. A, and Memic, A. (2016), “Formation of Carbon Nanotubes from Carbon Rich Fly Ash: Growth Parameters and Mechanism,” Materials and Manufacturing Processes, 31, pp 146–156.
   Web of Science ®Google Scholar
• Wang, Y., Li, J., Wang, L., Chen, J., and Xue, Q. (2013), “Tribological Performances of Graphite-Like Carbon Films Coupled to Different Ceramics in Ambient Air and Water,” Tribology Transactions, 56, pp 333–341.
   Web of Science ®Google Scholar
• Kim, Y. K. and Park, H. (2011), “Light-Harvesting Multi-Walled Carbon Nanotubes and CdS Hybrids: Application to Photocatalytic Hydrogen Production from Water,” Energy & Environmental Science, 4, pp 685–694.
   Web of Science ®Google Scholar
• Vix-Guter, C., Dentzer, J., and Delhaes, P. (2004), “Surface Characterizations of Carbon Multiwall Nanotubes: Comparison between Surface Active Sites and Raman Spectroscopy,” The Journal of Physical Chemistry B, 108, pp 19361–19367.
   Web of Science ®Google Scholar
• Chu, P. and Li, K. L. (2006), “Characterization of Amorphous and Nanocrystalline Carbon Films,” Materials Chemistry and Physics, 96, pp 253–277.
   Web of Science ®Google Scholar
• Beamson, G. and Briggs, D. (1992) High Resolution XPS of Organic Polymers: The Scienta ESCA300 Database, 1st ed., John Wiley & Sons: Hoboken, NJ.
   Google Scholar
• Moy, D., Niu, C., Tennent, H., and Hoch, R. (2004), “Lubricants Containing Carbon Nanotubes,” U.S. Patent No. 6828282.
   Google Scholar
• Curasu, D. L., Andronescu, C., Pirva, C., and Ripeanu, R. (2012), “The Efficiency of Co-Based Single Wall Carbon Nanotubes (SWNTs) as an AW/EP Additive for Mineral Base Oils,” Wear, 290–291, pp 133–139.
   Web of Science ®Google Scholar
• Senatore, S., D'Agostino, V., Petrone, V., Ciambelli, P., and Sarno, M. (2013), “Graphene Oxide Nanosheets as Effective Friction Modifier for Oil Lubricant: Materials, Methods, and Tribological Results,” ISRN Tribology, 2013, pp 425809.
   Google Scholar
• Vidal, F. A. C. and Ávila, A. F. (2014), “Tribological Investigation of Nanographite Platelets as Additive in Anti-Wear Lubricant: A Top-Down Approach,” Journal of Tribology, 136, pp 031603.
   Google Scholar
• Zhmud, B. and Pasalskiy, B. (2013), “Nanomaterials in Lubricants: An Industrial Perspective on Current Research,” Lubricants, 1, pp 95–101.
   Google Scholar
• Liao, Y., Pourzal, R., Wimmer, M. A., Jacobs, J. J., Fischer, A., and Marks, L. D. (2011), “Graphitic Tribological Layers in Metal-on-Metal Hip Replacements,” Science, 334, pp 1687–1690.
   PubMed Web of Science ®Google Scholar
• Peng, Y. and Wang, Z. (2014), “Tribological Properties of Sodium Dodecyl Sulfate Aqueous Dispersion of Graphite-Derived Carbon Materials,” RSC Advances, 4, pp 9980–9985.
   Web of Science ®Google Scholar